Direct, NAD(P)H-independent regeneration of Old Yellow Enzymes represents an interesting approach for simplified reaction schemes for the stereoselective reduction of conjugated C=C-double bonds. Simply by illuminating the reaction mixtures with blue light in the presence of sacrificial electron donors enables to circumvent the costly and unstable nicotinamide cofactors and a corresponding regeneration system. In the present study, we characterise the parameters determining the efficiency of this approach and outline the current limitations. Particularly, the photolability of the flavin photocatalyst and the (flavin-containing) biocatalyst represent the major limitation en route to preparative application.

The specific oxidation of 12α-OH group of hydroxysteroids is required for the preparation of cheno-and ursodeoxycholic acid (CDCA and UDCA, respectively). The C₁₂ oxidation of hydroxysteroids into their 12-oxo derivatives can selectively be performed by employing 12α-hydroxysteroid dehydrogenases. These enzymes use NAD(P)⁺ as an electron acceptor, which has to be re-oxidized in a so-called “regeneration system”. Recently, the enzyme NAD(P)H oxidase (NOX) was applied for the regeneration of NAD⁺ in the enzymatic preparation of 12-oxo-CDCA from cholic acid (CA), which allows air to be used as an oxidant. However, the NOX system suffers from low activity and low stability. Moreover, the substrate loading is limited to 10 mM. In this study, the laccase/mediator system was investigated as a possible alternative to NOX, employing air as an oxidant. The laccase/mediator system shows higher productivity and scalability than the NOX system. This was proven with a preparative biotransformation of 20 g of CA into 12-oxo-CDCA (92% isolated yield) by employing a substrate loading of 120 mM (corresponding to 50 g/L). Additionally, the performance of the laccase/mediator system was compared with a classical ADH/acetone regeneration system and with other regeneration systems reported in literature.

H₂O₂ can be accepted by several peroxygenases as a clean oxidant, able to supply both the necessary electrons and oxygen atom at the same time. The biocatalysts, in turn, are able to catalyse an array of interesting oxygen insertion reactions at enantio- and regio-selectivities hard to attain with classical chemical methods. The sensitivity of most peroxygenases towards H₂O₂, however, requires this oxidant to be generated in situ. Here, we suggest the application of (modified) sulfite oxidases to couple the oxidation of sulfites to the reduction of oxygen. This enables us to use calcium sulfite, an industrial waste product from scrubbing flue gases, as an electron donor to reduce oxygen. This will supply the required peroxide in a controlled manner and enables us to perform these challenging reactions at the expense of simple salts.

The novel formate oxidase from Aspergillus oryzae (AoFOx) is a useful catalyst to promote H₂O₂-dependent oxyfunctionalisation reactions. In this contribution we exploit the substrate promiscuity of AoFOx to fully oxidise methanol and formaldehyde to CO₂ and drive peroxygenase-catalysed stereoselective oxyfunctionalisation reactions. The highly atom efficient H₂O₂ generation system also enabled high catalytic turnover of the peroxygenase production enzyme.

The scale-up of chemoenzymatic bromolactonization to 100 g scale is presented, together with an identification of current limitations. The preparative-scale reaction also allowed for meaningful mass balances identifying current bottlenecks of the chemoenzymatic reaction.

Two-component-diffusible-flavomonooxygenases are versatile biocatalysts for selective epoxidation-, hydroxylation- or halogenation reactions. Their complicated molecular architecture can be simplified using photochemical regeneration of the catalytically active, reduced FADH ₂ prosthetic group. In this contribution we provide the proof-of-concept and characterization for the direct regeneration of the styrene monooxygenase from Pseudomonas.

Biocatalytic oxyfunctionalisation reactions are traditionally conducted in aqueous media limiting their production yield. Here we report the application of a peroxygenase in neat reaction conditions reaching product concentrations of up to 360 mM.

The consecutive photooxidation and reductive amination of various alcohols in a cascade reaction were realized by the combination of a photocatalyst and several enzymes. Whereas the photocatalyst (sodium anthraquinone-2-sulfonate) mediated the light-driven, aerobic oxidation of primary and secondary alcohols, the enzymes (various ω-transaminases) catalyzed the enantio-specific reductive amination of the intermediate aldehydes and ketones. The system worked in a one-pot one-step fashion, whereas the productivity was significantly improved by switching to a one-pot two-step procedure. A wide range of aliphatic and aromatic compounds was transformed into the enantiomerically pure corresponding amines via the photo-enzymatic cascade.

Elemental metals are shown to be suitable sacrificial electron donors to drive the stereoselective reduction of conjugated C=C double bonds using Old Yellow Enzymes as catalysts. Both direct electron transfer from the metal to the enzyme as well as mediated electron transfer is feasible, although the latter excels by higher reaction rates. The general applicability of this new chemoenzymatic reduction method is demonstrated, and current limitations are outlined.

Peroxygenases require a controlled supply of H₂O₂ to operate efficiently. Here, we propose a photocatalytic system for the reductive activation of ambient O₂ to produce H₂O₂ which uses the energy provided by visible light more efficiently based on the combination of wavelength-complementary photosensitizers. This approach was coupled to an enzymatic system to make formate available as a sacrificial electron donor. The scope and current limitations of this approach are reported and discussed.

The C12 specific oxidation of hydroxysteroids is an essential reaction required for the preparation of pharmaceutical ingredients like ursodeoxycholic acid (UDCA) and chenodeoxycholic acid (CDCA), which can be synthesized by Wolff-Kishner reduction of the obtained 12-oxo-hydroxysteroids. 12α-hydroxysteroid dehydrogenases (12α-HSDHs) have been shown to perform this reaction with high yields, under mild conditions and without the need of protection and deprotection steps, required in chemical synthesis. Here, the recombinant expression and biochemical characterization of the nicotinamide adenine dinucleotide (NAD ⁺ )-dependent HSDH from Eggerthella lenta (El12α-HSDH) are reported. This enzyme shows comparable properties with the well-known nicotinamide adenine dinucleotide phosphate (NADP ⁺ )-dependent enzyme from Clostridium sp. 48–50. In order to perform a viable and atom efficient enzymatic hydroxysteroid oxidation, NAD(P)H oxidase (NOX) was employed as cofactor regeneration system: NOX uses oxygen (O ₂ ) as sacrificial substrate and produces only water as side product. 10 mM of cholic acid was fully and selectively converted to 12-oxo-CDCA in 24 h. The possibility to employ this system on UCA and 7-oxo-deoxycholic acid (7-oxo-DCA) as substrates was additionally investigated. The performance of the El12α-HSDH was evaluated also in combination with a “classical” regeneration system (oxaloacetate/malate dehydrogenase) showing full conversion in 4 h. Finally, the feasibility of a catalytic aerobic-NAD ⁺ -dependent enzymatic oxidation was shown on a preparative scale (oxidation of CA to 12-oxo-CDCA) employing the El12α-HSDH-NOX system in a segmented-flow-reactor. (Figure presented.).

Peroxygenases are very interesting catalysts for specific oxyfunctionalization chemistry. Instead of relying on complicated electron transport chains, they rely on simple hydrogen peroxide as the stoichiometric oxidant. Their poor robustness against H₂O₂ can be addressed via in situ generation of H₂O₂. Here we report that simple graphitic carbon nitride (g-C₃N₄) is a promising photocatalyst to drive peroxygenase-catalyzed hydroxylation reactions. The system has been characterized by outlining not only its scope but also its current limitations. In particular, spatial separation of the photocatalyst from the enzyme is shown as a solution to circumvent the undesired inactivation of the biocatalyst. Overall, very promising turnover numbers of the biocatalyst of more than 60.000 have been achieved.

The selective oxidation of trans-2-hexen-1-ol to the corresponding aldehyde using a recombinant aryl alcohol oxidase from Pleurotus eryngii (PeAAOx) is reported. Especially using the two liquid phase system to overcome solubility and product inhibition issues enabled to achieve more than 2.200.000 catalytic turnovers for the production enzyme as well as molar product concentrations, pointing towards an economic feasible reaction.

The biocatalytic preparation of trans-hex-2-enal from trans-hex-2-enol using a novel aryl alcohol oxidase from Pleurotus eryngii (PeAAOx) is reported. As O₂-dependent enzyme PeAAOx-dependent reactions are generally plagued by the poor solubility of O₂ in aqueous media and mass transfer limitations resulting in poor reaction rates. These limitations were efficiently overcome by conducting the reaction in a flow-reactor setup reaching unpreceded catalytic activities for the enzyme in terms of turnover frequency (up to 38 s^-1) and turnover numbers (more than 300000) pointing towards preparative usefulness of the proposed reaction scheme.

Ursodeoxycholic acid (UDCA) is a pharmaceutical ingredient widely used in clinics. As bile acid it solubilizes cholesterol gallstones and improves the liver function in case of cholestatic diseases. UDCA can be obtained from cholic acid (CA), which is the most abundant and least expensive bile acid available. The now available chemical routes for the obtainment of UDCA yield about 30% of final product. For these syntheses several protection and deprotection steps requiring toxic and dangerous reagents have to be performed, leading to the production of a series of waste products. In many cases the cholic acid itself first needs to be prepared from its taurinated and glycilated derivatives in the bile, thus adding to the complexity and multitude of steps involved of the synthetic process. For these reasons, several studies have been performed towards the development of microbial transformations or chemoenzymatic procedures for the synthesis of UDCA starting from CA or chenodeoxycholic acid (CDCA). This promising approach led several research groups to focus their attention on the development of biotransformations with non-pathogenic, easy-to-manage microorganisms, and their enzymes. In particular, the enzymatic reactions involved are selective hydrolysis, epimerization of the hydroxy functions (by oxidation and subsequent reduction) and the specific hydroxylation and dehydroxylation of suitable positions in the steroid rings. In this minireview, we critically analyze the state of the art of the production of UDCA by several chemical, chemoenzymatic and enzymatic routes reported, highlighting the bottlenecks of each production step. Particular attention is placed on the precursors availability as well as the substrate loading in the process. Potential new routes and recent developments are discussed, in particular on the employment of flow-reactors. The latter technology allows to develop processes with shorter reaction times and lower costs for the chemical and enzymatic reactions involved.