The selective oxidation of trans-2-hexen-1-ol to the corresponding aldehyde using a recombinant aryl alcohol oxidase from Pleurotus eryngii (PeAAOx) is reported. Especially using the two liquid phase system to overcome solubility and product inhibition issues enabled to achieve more than 2.200.000 catalytic turnovers for the production enzyme as well as molar product concentrations, pointing towards an economic feasible reaction.

Microfluidic devices based on polydimethylsiloxane shown a plethora of experimental possibilities due to good transparency, flexibility and ability to adhere reversibly and irreversibly to distinct materials. Though PDMS is a milestone in microfluidic developments, its cost and handling directed the field to search for new options. 3D printing technology nowadays starts a revolution offering materials and possibilities that can contribute positively to current methodologies. Here we explored the fused deposition modeling 3D printing technique to obtain integrated, transparent and sealed microchannels made with polylactic acid, a cheap alternative material to set up microfluidic systems. Using a home-made 3D printer, devices could be assembled in a simplified process, enabling the integration of different materials such as paper, glass, wire and polymers within the microchannel. To demonstrate the efficacy of this approach, a 3D-printed electronic tongue sensor was built, enabling the distinction of basic tastes below the human threshold.

Graphene is a breakthrough 2D material due to its unique mechanical, electrical, and thermal properties, with considerable responsiveness in real applications. However, the coverage of large areas with pristine graphene is a challenge and graphene derivatives have been alternatively exploited to produce hybrid and composite materials that allow for new developments, considering also the handling of large areas using distinct methodologies. For electronic applications there is significant interest in the investigation of the electrical properties of graphene derivatives and related composites to determine whether the characteristic 2D charge transport of pristine graphene is preserved. Here, we report a systematic study of the charge transport mechanisms of reduced graphene oxide chemically functionalized with sodium polystyrene sulfonate (PSS), named as GPSS. GPSS was produced either as quantum dots (QDs) or nanoplatelets (NPLs), being further nanostructured with poly(diallyldimethylammonium chloride) through the layer-by-layer (LbL) assembly to produce graphene nanocomposites with molecular level control. Current-voltage (I-V) measurements indicated a meticulous growth of the LbL nanostructures onto gold interdigitated electrodes (IDEs), with a space-charge-limited current dominated by a Mott-variable range hopping mechanism. A 2D intra-planar conduction within the GPSS nanostructure was observed, which resulted in effective charge carrier mobility (μ) of 4.7 cm² V^-1 s^-1 for the QDs and 34.7 cm² V^-1 s^-1 for the NPLs. The LbL assemblies together with the dimension of the materials (QDs or NPLs) were favorably used for the fine tuning and control of the charge carrier mobility inside the LbL nanostructures. Such 2D charge conduction mechanism and high μ values inside an interlocked multilayered assembly containing graphene-based nanocomposites are of great interest for organic devices and functionalization of interfaces.