Additively manufactured (AM) degradable porous metallic biomaterials offer unique opportunities for satisfying the design requirements of an ideal bone substitute. Among the currently available biodegradable metals, iron has the highest elastic modulus, meaning that it would benefit the most from porous design. Given the successful preclinical applications of such biomaterials for the treatment of cardiovascular diseases, the moderate compatibility of AM porous iron with osteoblast-like cells, reported in earlier studies, has been surprising. This may be because, as opposed to static in vitro conditions, the biodegradation products of iron in vivo are transported away and excreted. To better mimic the in situ situations of biodegradable biomaterials after implantation, we compared the biodegradation behavior and cytocompatibility of AM porous iron under static conditions to the conditions with dynamic in situ-like fluid flow perfusion in a bioreactor. Furthermore, the compatibility of these scaffolds with four different cell types was evaluated to better understand the implications of these implants for the complex process of natural wound healing. These included endothelial cells, L929 fibroblasts, RAW264.7 macrophage-like cells, and osteoblastic MG-63 cells. The biodegradation rate of the scaffolds was significantly increased in the perfusion bioreactor as compared to static immersion. Under either condition, the compatibility with L929 cells was the best. Moreover, the compatibility with all the cell types was much enhanced under physiomimetic dynamic flow conditions as compared to static biodegradation. Our study highlights the importance of physiomimetic culture conditions and cell type selection when evaluating the cytocompatibility of degradable biomaterials in vitro. Statement of Significance: Additively manufactured (AM) degradable porous metals offer unique opportunities for the treatment of large bony defects. Despite the successful preclinical applications of biodegradable iron in the cardiovascular field, the moderate compatibility of AM porous iron with osteoblast-like cells was reported. To better mimic the in vivo condition, we compared the biodegradation behavior and cytocompatibility of AM porous iron under static condition to dynamic perfusion. Furthermore, the compatibility of these scaffolds with various cell types was evaluated to better simulate the process of natural wound healing. Our study suggests that AM porous iron holds great promise for orthopedic applications, while also highlighting the importance of physio-mimetic culture conditions and cell type selection when evaluating the cytocompatibility of degradable biomaterials in vitro.

@en

Natural gas hydrates production tests over the last two decades has sown that production is not without risks. Indirect effects in the sedimentary rocks of phase changes are changes in porosity, permeability, and saturation. From a field production test site, porosity changes in the range of 15% to 19% and saturation from 5% to 60% were reported. Monitoring is in principle possible using an electromagnetic survey with a downhole vertical electric source and a horizontal electric field receiver on the seafloor. Computed model responses over a wide frequency range and for many depth locations of an electric current source show that both changes can be detected. Best detectability occurs when the current source is below the reservoir layer in case of changes differences can be detected above, inside and below the reservoir layer at frequencyies below 10 Hz. At a source operating frequency of 0.1 Hz maximum response difference between the two values in saturation occur when the source is 20 m above the top of the reservoir layer unil 100 m below the bottom. Only below the top of the reservoir there is almost no difference in the electric field amplitude between the two saturation levels below 10 Hz.

@en

Since the COVID-19 pandemic outbreak, long-term overlooked motives concerning a sense of safety have become a primary concern. People's sense of safety largely depends on the information they receive. Indeed, a tsunami of information about the virus has been disseminated by all forms of media to people's electronic devices, thus permeating their lives. This study proposed that the over-abundance of information, known as information overload, could endanger individuals' sense of safety by increasing their rumination about COVID-19. However, it could also enhance their sense of safety by increasing their positive attitudes toward COVID-19 precautions. Furthermore, we proposed that individuals' hypervigilance could strengthen the relationship between information overload and rumination about COVID-19 and attitudes toward COVID-19 precautions. We tested these hypotheses using a cross-sectional survey study (N = 403) in February 2021 and a diary study (N = 98) in July 2021 in China. The results of both studies support the dual mediating paths of the relationship between information overload and sense of safety. We also found that hypervigilance moderated the relationship between information overload and rumination about COVID-19. Overall, our study offers insights into how social media may influence people's sense of safety and how individual differences in hypervigilance play a role in the process.@en

The objective of the current work is to support the design of a pilot hydrogen and electricity producing plant that uses natural gas (or biomethane) as raw material, as a transition option towards a 100% renewable transportation system. The plant, with a solid oxide fuel cell (SOFC) as principal technology, is intended to be the main unit of an electric vehicle station. The refueling station has to work at different operation periods characterized by the hydrogen demand and the electricity needed for supply and self-consumption. The same set of heat exchangers has to satisfy the heating and cooling needs of the different operation periods. In order to optimize the operating variables of the pilot plant and to provide the best heat exchanger network, the applied methodology follows a systematic procedure for multi-objective, i.e. maximum plant efficiency and minimum number of heat exchanger matches, and multi-period optimization. The solving strategy combines process flow modeling in steady state, superstructure-based mathematical programming and the use of an evolutionary-based algorithm for optimization. The results show that the plant can reach a daily weighted efficiency exceeding 60%, up to 80% when considering heat utilization.@en

A shape memory composite (SMC) coating with a self-healing ability was prepared by a facile method based on a thermoresponsive shape memory polymer (SMP) that utilized carnauba wax microparticles as the healing agent. Damages to the SMC coating was healed via heating, which triggered a two-step healing mechanism consisting of defect closure through a shape memory effect at 65 °C and then defect sealing by molten wax at 90 °C. The surface morphologies of the scratched and healed coatings as well as a wax-free SMP coating were first studied by optical stereomicroscopy and scanning electron microscopy (SEM). To assess the recovery of the coating’s barrier properties, macroscopic and localized information was obtained by electrochemical impedance spectroscopy (EIS) and scanning electrochemical microscopy (SECM), respectively. The healing performance was also evaluated by comparing the macroscopic morphologies of the intact, damaged and healed coatings after long-term immersion. The results from both tests were in agreement and confirmed the key roles of carnauba wax microparticles in the complete recovery of the barrier properties of initially damaged coatings upon thermally assisted self-healing.@en