Urban hydrological applications require high resolution precipitation and catchment information in order to well represent the spatial variability, fast runoff processes and short response times of urban catchments (Berne et al., 2004). Although fast progress has been made over the last few decades in high resolution measurement of rainfall at urban scales, including increasing use of weather radars, recent studies suggest that the resolution of the currently available rainfall estimates (typically 1 × 1 km2 in space and 5 min in time) may still be too coarse to meet the stringent requirements of urban hydrology (Gires et al., 2012). What is more, current evidence is still insufficient to provide a concrete answer regarding the added value of higher resolution rainfall estimates and actual rainfall input resolution requirements for urban hydrological applications. With the aim of providing further evidence in this regard, a collaborative study was conducted which investigated the impact of rainfall input resolutions on the outputs of the operational urban drainage models of four urban catchments in the UK and Belgium (Figure 1).@en

This paper presents an approach to enhance the role of local stakeholders in dealing with urban floods. The concept is based on the DIANE-CM project (Decentralised Integrated Analysis and Enhancement of Awareness through Collaborative Modelling and Management of Flood Risk) of the 2nd ERANET CRUE funding initiative. The main objective of the project was to develop and test an advanced methodology for enhancing the resilience of local communities to flooding. Through collaborative modelling, a social learning process was initiated that enhances the social capacity of the stakeholders due to the interaction process. The other aim of the project was to better understand how data from hazard and vulnerability analyses and improved maps, as well as from the near real-time flood prediction, can be used to initiate a public dialogue (i.e. collaborative mapping and planning activities) in order to carry out more informed and shared decision-making processes and to enhance flood risk awareness. The concept of collaborative modelling was applied in two case studies: (1) the Cranbrook catchment in the UK, with focus on pluvial flooding; and (2) the Alster catchment in Germany, with focus on fluvial flooding. As a result of the interactive and social learning process, supported by sociotechnical instruments, an understanding of flood risk was developed amongst the stakeholders and alternatives for flood risk management for the respective case study area were jointly developed and ranked as a basis for further planning and management.@en