During the last decade, many approaches for resolved-particle simulation (RPS) have been developed for numerical studies of finite-size particle-laden turbulent flows. In this paper, three RPS approaches are compared for a particle-laden decaying turbulence case. These methods are, the Volume-of-Fluid Lagrangian method, based on the viscosity penalty method (VoF-Lag); a direct forcing Immersed Boundary Method, based on a regularized delta function approach for the fluid/solid coupling (IBM); and the Bounce Back scheme developed for Lattice Boltzmann method (LBM-BB). The physics and the numerical performances of the methods are analyzed. Modulation of turbulence is observed for all the methods, with a faster decay of turbulent kinetic energy compared to the single-phase case. Lagrangian particle statistics, such as the velocity probability density function and the velocity autocorrelation function, show minor differences among the three methods. However, major differences between the codes are observed in the evolution of the particle kinetic energy. These differences are related to the treatment of the initial condition when the particles are inserted in an initially single-phase turbulence. The averaged particle/fluid slip velocity is also analyzed, showing similar behavior as compared to the results referred in the literature. The computational performances of the different methods differ significantly. The VoF-Lag method appears to be computationally most expensive. Indeed, this method is not adapted to turbulent cases. The IBM and LBM-BB implementations show very good scaling.

@en

Urban hydrological applications require high resolution precipitation and catchment information in order to well represent the spatial variability, fast runoff processes and short response times of urban catchments (Berne et al., 2004). Although fast progress has been made over the last few decades in high resolution measurement of rainfall at urban scales, including increasing use of weather radars, recent studies suggest that the resolution of the currently available rainfall estimates (typically 1 × 1 km2 in space and 5 min in time) may still be too coarse to meet the stringent requirements of urban hydrology (Gires et al., 2012). What is more, current evidence is still insufficient to provide a concrete answer regarding the added value of higher resolution rainfall estimates and actual rainfall input resolution requirements for urban hydrological applications. With the aim of providing further evidence in this regard, a collaborative study was conducted which investigated the impact of rainfall input resolutions on the outputs of the operational urban drainage models of four urban catchments in the UK and Belgium (Figure 1).@en