We show diamond Tin-Vacancy centers, coherently-coupled to a tunable microcavity. The exceptional optical properties of this emitter in combination with a stable, high quality cavity enables a cavity transmission signal modulated by a single emitter.

@en

Efficient coupling of optically active qubits to optical cavities is a key challenge for solid-state-based quantum optics experiments and future quantum technologies. Here we present a quantum photonic interface based on a single tin-vacancy center in a micrometer-thin diamond membrane coupled to a tunable open microcavity. We use the full tunability of the microcavity to selectively address individual tin-vacancy centers within the cavity mode volume. Purcell enhancement of the tin-vacancy center optical transition is evidenced both by optical excited state lifetime reduction and by optical linewidth broadening. As the emitter selectively reflects the single-photon component of the incident light, the coupled emitter-cavity system exhibits strong quantum nonlinear behavior. On resonance, we observe a transmission dip of 50% for low incident photon number per Purcell-reduced excited state lifetime, while the dip disappears as the emitter is saturated with higher photon number. Moreover, we demonstrate that the emitter strongly modifies the photon statistics of the transmitted light by observing photon bunching. This work establishes a versatile and tunable platform for advanced quantum optics experiments and proof-of-principle demonstrations on quantum networking with solid-state qubits.@en

Open microcavities offer great potential for the exploration and utilization of efficient spin-photon interfaces with Purcell-enhanced quantum emitters thanks to their large spectral and spatial tunability combined with high versatility of sample integration. However, a major challenge for this platform is the sensitivity to cavity length fluctuations in the cryogenic environment, which leads to cavity resonance frequency variations and thereby a lowered averaged Purcell enhancement. This work presents a closed-cycle cryogenic fiber-based microcavity setup, which is in particular designed for a low passive vibration level, while still providing large tunability and flexibility in fiber and sample integration, and high photon collection efficiency from the cavity mode. At temperatures below 10 K, a stability level of around 25 pm is reproducibly achieved in different setup configurations, including the extension with microwave control for manipulating the spin of cavity-coupled quantum emitters, enabling a bright photonic interface with optically active qubits.

@en

We present our optimized diamond fabrication process based on quasi-isotropic crystal-plane-dependent reactive-ion-etching at low and high temperature plasma regime. We demonstrate successful integration of SnV centers in diamond waveguides showing quantum non-linear effects. We report on our latest results on all-diamond photonic crystal cavities.

@en

We report on the realization of a fiber-based microcavity, exhibiting low cavity length fluctuations in combination with full spatial and spectral tunability. The microcavity is used to demonstrate Purcell-enhancement of diamond Tin-Vacancy centers.@en

We demonstrate coherent coupling of a single diamond Tin-Vacancy center to a fiber-based microcavity, showing a cavity transmission dip of 50 % on resonance, and altered photon statistics in cavity transmission.

@en

Controlling magnon densities in magnetic materials enables driving spin transport in magnonic devices. We demonstrate the creation of large, out-of-equilibrium magnon densities in a thin-film magnetic insulator via microwave excitation of coherent spin waves and subsequent multimagnon scattering. We image both the coherent spin waves and the resulting incoherent magnon gas using scanning-probe magnetometry based on electron spins in diamond. We find that the gas extends unidirectionally over hundreds of micrometers from the excitation stripline. Surprisingly, the gas density far exceeds that expected for a boson system following a Bose-Einstein distribution with a maximum value of the chemical potential. We characterize the momentum distribution of the gas by measuring the nanoscale spatial decay of the magnetic stray fields. Our results show that driving coherent spin waves leads to a strong out-of-equilibrium occupation of the spin-wave band, opening new possibilities for controlling spin transport and magnetic dynamics in target directions.

@en

With the ability to transfer and process quantum information, large-scale quantum networks will enable a suite of fundamentally new applications, from quantum communications to distributed sensing, metrology, and computing. This Perspective reviews requirements for quantum network nodes and color centers in diamond as suitable node candidates. We give a brief overview of state-of-the-art quantum network experiments employing color centers in diamond and discuss future research directions, focusing, in particular, on the control and coherence of qubits that distribute and store entangled states, and on efficient spin-photon interfaces. We discuss a route toward large-scale integrated devices combining color centers in diamond with other photonic materials and give an outlook toward realistic future quantum network protocol implementations and applications.

@en

The nitrogen-vacancy (N-V) center in diamond has been established as a prime building block for quantum networks. However, scaling beyond a few network nodes is currently limited by low spin-photon entanglement rates, resulting from the N-V center's low probability of coherent photon emission and collection. Integration into a cavity can boost both values via the Purcell effect, but poor optical coherence of near-surface N-V centers has so far prevented their resonant optical control, as would be required for entanglement generation. Here, we overcome this challenge, and demonstrate resonant addressing of individual, fiber-cavity-coupled N-V centers, and collection of their Purcell-enhanced coherent photon emission. Utilizing off-resonant and resonant addressing protocols, we extract an enhancement of the zero-phonon line emission by a factor of up to 4, consistent with a detailed theoretical model. This model predicts that the probability of coherent photon detection per optical excitation can be increased to 10% for realistic parameters - an improvement over state-of-the art solid immersion lens collection systems by 2 orders of magnitude. The resonant operation of an improved optical interface for single coherent quantum emitters in a closed-cycle cryogenic system at T∼4 K is an important result towards extensive quantum networks with long coherence.

@en

With their ability to process and transfer quantum information, large-scale entanglement-based quantum networks could be at the heart of a new age of quantum information, enabling fundamentally new applications such as distributed quantum computation, quantum communication, and quantum enhanced sensing. Due to their long spin coherence, controllable local qubit registers and optically active spins, color centers in diamond are prime candidates for nodes of such a network, and have enabled some of the most advanced quantum network demonstrations to date. These demonstrations include the distribution of a 3-node GHZ state across a quantum network, entanglement swapping, entanglement distillation, and memory-enhanced quantum communication. To move beyond current proof-of-principle networks, a further increase of entanglement generation rates is crucial. This thesis presents theoretical and experimental work on enhancing the spin-photon interface of color centers in diamond to achieve this goal, making use of the Purcell effect. The discussed work follows two main directions: embedding of color centers in open, tuneable Fabry-Perot micro-cavities, and in all-diamond photonic crystal cavities. First, we describe theoretical and experimental progress towards cavity-enhanced quantum networks based on nitrogen-vacancy (NV) centers in diamond. Due to their first order sensitivity to electric fields, we choose to embed NV centers in microns-thin diamond membranes that can be integrated into open fiber-based micro-cavities. We develop analytical methods to optimize the design of such open cavity systems for maximum Purcell enhancement of embedded color centers. We demonstrate a method to fabricate optically coherent NV centers in microns-thin diamond membranes, and use such structures to demonstrate the resonant excitation and detection of coherent, Purcell enhanced NV emission. A theoretical model in excellent agreement with our results suggests our system can improve entanglement rates between distant NV centers by two orders of magnitude with near-term improvements to the setup. Second, we describe progress towards an efficient spin-photon interface of group-IV color centers in diamond by coupling them to photonic nanostructures, allowing for large-scale integration. Due to their first-order insensitivity to electric fields, group-IV color centers can be brought in close proximity to surfaces (~ 100 nm), allowing for sub-wavelength mode volumes and thus very high Purcell factors. We numerically optimize photonic crystal cavity designs to maximize the Purcell enhancement of embedded emitters, test the robustness of our designs to real-world fabrication imperfections, and devise a method to efficiently interface nanophotonic structures. We then proceed to fabricate all-diamond photonic crystal cavities, making use of a dry etching technique that is selective to different crystallographic directions, and characterize the resulting optical quality factors. Finally, we marry the developed fabrication methods to fabricate microns-sized diamond platelets that can be transferred from a holding frame in a controlled fashion. This capability could be crucial for the realization of hybrid photonic circuits that we expect to be at the heart of future large-scale quantum networks.@en

Quantum channels enable the implementation of communication tasks inaccessible to their classical counterparts. The most famous example is the distribution of secret key. However, in the absence of quantum repeaters, the rate at which these tasks can be performed is dictated by the losses in the quantum channel. In practice, channel losses have limited the reach of quantum protocols to short distances. Quantum repeaters have the potential to significantly increase the rates and reach beyond the limits of direct transmission. However, no experimental implementation has overcome the direct transmission threshold. Here, we propose three quantum repeater schemes and assess their ability to generate secret key when implemented on a setup using nitrogen-vacancy (NV) centers in diamond with near-term experimental parameters. We find that one of these schemes - the so-called single-photon scheme, requiring no quantum storage - has the ability to surpass the capacity - the highest secret-key rate achievable with direct transmission - by a factor of 7 for a distance of approximately 9.2 km with near-term parameters, establishing it as a prime candidate for the first experimental realization of a quantum repeater.

@en

The advancement of quantum optical science and technology with solid-state emitters such as nitrogen-vacancy (NV) centers in diamond critically relies on the coherence of the emitters' optical transitions. A widely employed strategy to create NV centers at precisely controlled locations is nitrogen ion implantation followed by a high-temperature annealing process. We report on experimental data directly correlating the NV center optical coherence to the origin of the nitrogen atom. These studies reveal low-strain, narrow-optical-linewidth (<500 MHz) NV centers formed from naturally occurring N14 atoms. In contrast, NV centers formed from implanted N15 atoms exhibit significantly broadened optical transitions (>1 GHz) and higher strain. The data show that the poor optical coherence of the NV centers formed from implanted nitrogen is not due to an intrinsic effect related to the diamond or isotope. These results have immediate implications for the positioning accuracy of current NV center creation protocols and point to the need to further investigate the influence of lattice damage on the coherence of NV centers from implanted ions.

@en

Diamond membrane devices containing optically coherent nitrogen-vacancy (NV) centers are key to enable novel cryogenic experiments such as optical ground-state cooling of hybrid spin-mechanical systems and efficient entanglement distribution in quantum networks. Here, we report on the fabrication of a (3.4 ± 0.2) μm thin, smooth (surface roughness r_q < 0.4 nm over an area of 20 μm by 30 μm) diamond membrane containing individually resolvable, narrow linewidth (< 100 MHz) NV centers. We fabricate this sample via a combination of high-energy electron irradiation, high-temperature annealing, and an optimized etching sequence found via a systematic study of the diamond surface evolution on the microscopic level in different etch chemistries. Although our particular device dimensions are optimized for cavity-enhanced entanglement generation between distant NV centers in open, tunable microcavities, our results have implications for a broad range of quantum experiments that require the combination of narrow optical transitions and micrometer-scale device geometry.

@en

Defect centres in diamond are promising building blocks for quantum networks thanks to a long-lived spin state and bright spin-photon interface. However, their low fraction of emission into a desired optical mode limits the entangling success probability. The key to overcoming this is through Purcell enhancement of the emission. Open Fabry-Perot cavities with an embedded diamond membrane allow for such enhancement while retaining good emitter properties. To guide the focus for design improvements it is essential to understand the influence of different types of losses and geometry choices. In particular, in the design of these cavities a high Purcell factor has to be weighed against cavity stability and efficient outcoupling. To be able to make these trade-offs we develop analytic descriptions of such hybrid diamond-and-air cavities as an extension to previous numeric methods. The insights provided by this analysis yield an effective tool to find the optimal design parameters for a diamond-air cavity.

@en