Color-center quantum bits (qubits), such as the Nitrogen-Vacancy center (NV) in diamond, have demonstrated entanglement between remote (>1.3km) qubits and excellent coherence times [1], all while operating at a few Kelvins. Compared to other qubit technologies typically operating at mK temperatures, the higher operating temperature of NVs enables scalable 3D integration with cryo-CMOS control electronics [2], provides significantly more cooling power, and removes the interconnect bottleneck between the qubits and the electronics in prior art [3-5]. Yet, no cryo-CMOS controller for NV-based quantum computers (QC) has been demonstrated.

Striving toward a scalable quantum processor, this article presents the first cryo-CMOS quantum bit (qubit) controller targeting color centers in diamond. Color-center qubits enable a modular architecture that allows for the 3-D integration of photonics, cryo-CMOS control electronics, and qubits in the same package. However, performing quantum operations in a scalable manner requires large currents in the driving coils due to low coil-to-qubit coupling. Moreover, active calibration of the qubit Larmor frequency is required to compensate inhomogeneities of the bias magnetic field. To overcome these challenges, this work proposes both a cryo-CMOS alternating current (AC) controller consisting of a class-DE series-resonant driver and a DC current regulator (DC CR) that uses a triode-biased H-bridge for scalable low-power qubit operations. By experimentally validating the cryo-CMOS performance with a nitrogen-vacancy (NV) color-center qubit, the AC controller can drive a Rabi oscillation up to 2.5 MHz with a supply draw of 6.5 mA, and the DC CR can tune the Larmor frequency by pm 9 MHz while driving up to pm 20 mA in the bias coil. T_2* coherence times up to 5.3 μ s and single-qubit gate fidelities above 98% are demonstrated with the cryo-CMOS control using Ramsey experiments and gate set tomography (GST), respectively. The results demonstrate the efficacy of the proposed cryo-CMOS chips and enable the development of a modular quantum processor based on color centers.

Entanglement distribution over quantum networks has the promise of realizing fundamentally new technologies. Entanglement between separated quantum processing nodes has been achieved on several experimental platforms in the past decade. To move toward metropolitan-scale quantum network test beds, the creation and transmission of indistinguishable single photons over existing telecom infrastructure is key. Here, we report the interference of photons emitted by remote spectrally detuned NV-center-based network nodes, using quantum frequency conversion to the telecom L band. We find a visibility of 0.79±0.03 and an indistinguishability between converted NV photons around 0.9 over the full range of the emission duration, confirming the removal of the spectral information present. Our approach implements fully separated and independent control over the nodes, time multiplexing of control and quantum signals, and active feedback to stabilize the output frequency. Our results demonstrate a working principle that can be readily employed on other platforms and shows a clear path toward generating metropolitan-scale solid-state entanglement over deployed telecom fibers.

We demonstrate interference of photons emitted by remote, spectrally distinct NV-centers. Quantum frequency conversion at the nodes brings the photons to the same wavelength in the telecom L-band, compatible with entanglement generation at metropolitan scale.

Protecting quantum information from errors is essential for large-scale quantum computation. Quantum error correction (QEC) encodes information in entangled states of many qubits and performs parity measurements to identify errors without destroying the encoded information. However, traditional QEC cannot handle leakage from the qubit computational space. Leakage affects leading experimental platforms, based on trapped ions and superconducting circuits, which use effective qubits within many-level physical systems. We investigate how two-transmon entangled states evolve under repeated parity measurements and demonstrate the use of hidden Markov models to detect leakage using only the record of parity measurement outcomes required for QEC. We show the stabilization of Bell states over up to 26 parity measurements by mitigating leakage using postselection and correcting qubit errors using Pauli-frame transformations. Our leakage identification method is computationally efficient and thus compatible with real-time leakage tracking and correction in larger quantum processors.