Recent efforts in quantum photonics emphasize on-chip generation, manipulation, and detection of single photons for quantum computing and quantum communication. In quantum photonic chips, single photons are often generated using parametric down-conversion and quantum dots. Quantum dots are particularly attractive due to their on-demand generation of high-purity single photons. Different photonic platforms are used to manipulate the states of the photons. Nevertheless, no single platform satisfies all the requirements of quantum photonics, as each platform has its merits and shortcomings. For example, the thin-film silicon nitride (SiN) platform provides ultra-low loss on the order of 0.1 dB m−1, but is incompatible with dense integration , requiring large bending radii. On the other hand, silicon on insulator offers a high refractive index contrast for dense integration but has a high absorption coefficient at the emission wavelengths (800–970 nm) of state-of-the-art QDs. Amorphous silicon carbide (a-SiC) has emerged as an alternative with a high refractive index (higher than SiN), an extended transparency window compared to Silicon, and a thermo-optic coefficient three times higher than that of SiN, which is crucial for tuning photonic devices on a chip. With the vision of realizing a quantum photonic integrated circuit, we explore the hybrid integration of SiN/a-SiC photonic platform with quantum dots and superconducting nanowire single-photon detectors. We validate our hybrid platform using a brief literature study, proof-of-principle experiments, and complementary simulations. As a proof-of-principle, we show a quantum dot embedded in nanowires (for deterministic micro-transfer and better integration) that emits single photons at 885 nm with a purity of 0.011 and a lifetime of 0.98 ns. Furthermore, we design and simulate an adiabatic coupler between two photonic platforms, a-SiC and SiN, by aiming to use the benefits of both platforms, i.e. dense integration and low losses, respectively. Our design couples the light from SiN waveguide to a-SiC waveguide with 96% efficiency at 885 nm wavelength. Our hybrid platform can be used to demonstrate on-chip quantum experiments such as Hong–Ou–Mandel, where we can design a large optical delay line in SiN and an interference circuit in a-SiC.@en

Achieving high degree of tunability in photonic devices has been a focal point in the field of integrated photonics for several decades, enabling a wide range of applications from telecommunication and biochemical sensing to fundamental quantum photonic experiments. We introduce a novel technique to engineer the thermal response of photonic devices resulting in large and deterministic wavelength shifts across various photonic platforms, such as amorphous Silicon Carbide (a-SiC), Silicon Nitride (SiN) and Silicon-On-Insulator (SOI). In this paper, we demonstrate bi-directional thermal tuning of photonic devices fabricated on a single chip. Our method can be used to design high-sensitivity photonic temperature sensors, low-power Mach-Zehnder interferometers and more complex photonics circuits.

@en

In most optical waveguides employed within photonic integrated circuits, light confinement is achieved by etching the high-index layer. However, these waveguides often lack versatility in optimizing optical properties, such as mode size, shape, dispersion, and polarization. Moreover, they frequently suffer from high coupling losses and their propagation losses are significantly influenced by the quality of the etching process, especially for materials with high mechanical rigidity. Here, we present a hybrid optical waveguide concept that effectively addresses these limitations by combining a strip of easily processible low-index material (SU8) with a high-index hard-to-etch guiding layer (amorphous silicon carbide, SiC). Our approach not only eliminates the need for SiC etching but also offers flexibility in waveguide design to accommodate advanced functionalities. One of the key advancements of this hybrid configuration is its ability to suppress the transverse magnetic mode by 62 dB at 1550 nm, effectively functioning as a transverse electric pass waveguide. This simplifies the measurements by eliminating the need for polarization controllers and polarizers. Furthermore, through tailored waveguides, we achieve 2.5 times higher coupling efficiency compared to untapered hybrid SiC waveguides. We also demonstrate that thermal baking of the polymer layer reduces the scattering losses from 1.57 to 1.3 dB/cm. In essence, our hybrid approach offers a versatile way of realizing low-loss SiC-based integrated optical components with advanced features, such as excellent polarization suppression, flexible mode shapes, and dispersion control, compared to etched counterparts.@en

Photonic integrated circuits (PICs) are enabling breakthroughs in several areas, including quantum computing, neuromorphic processors, wearable devices, and more. Nevertheless, existing PIC measurement methods lack the spectral precision, speed, and sensitivity required for refining current applications and exploring new frontiers such as point-of-care or wearable biosensors. Here, the “sweeping optical frequency mixing method (SOHO)” is presented, surpassing traditional PIC measurement methods with real-time operation, 30 dB higher sensitivity, and over 100 times better spectral resolution. Leveraging the frequency mixing process with a sweeping laser, SOHO excels in simplicity, eliminating the need for advanced optical components and additional calibration procedures. Its superior performance is demonstrated on ultrahigh-quality factor (Q) fiber-loop resonators (Q = 46 × 10⁶), as well as microresonators, realized on a new optical waveguide platform. An experimental spectral resolution of 19.1 femtometers is demonstrated using an 85-meter-long unbalanced fiber Mach Zehnder Interferometer, constrained by noise resulting from the extended fiber length, while the theoretical resolution is calculated to be 6.2 femtometers, limited by the linewidth of the reference laser. With its excellent performance metrics, SOHO has the potential to become a vital measurement tool in photonics, excelling in high-speed and high-resolution measurements of weak optical signals.

@en

Integrated photonic platforms have proliferated in recent years, each demonstrating its unique strengths and shortcomings. Given the processing incompatibilities of different platforms, a formidable challenge in the field of integrated photonics still remains for combining the strengths of different optical materials in one hybrid integrated platform. Silicon carbide is a material of great interest because of its high refractive index, strong second- and third-order nonlinearities, and broad transparency window in the visible and near-infrared range. However, integrating silicon carbide (SiC) has been difficult, and current approaches rely on transfer bonding techniques that are time-consuming, expensive, and lacking precision in layer thickness. Here, we demonstrate high-index amorphous silicon carbide (a-SiC) films deposited at 150 °C and verify the high performance of the platform by fabricating standard photonic waveguides and ring resonators. The intrinsic quality factors of single-mode ring resonators were in the range of Q_int = (4.7-5.7) × 10⁵ corresponding to optical losses between 0.78 and 1.06 dB/cm. We then demonstrate the potential of this platform for future heterogeneous integration with ultralow-loss thin SiN and LiNbO₃ platforms.

@en

The transfer function is the characteristic function of the dispersive element of a reconstructive spectrometer. It maps the transmitted spatial intensity profile to the incident spectral intensity profile of an input. Typically, a widely tunable and narrowband source is required to determine the transfer function across the entire operating wavelength range, which increases the developmental cost of these reconstructive spectrometers. In this Letter, we utilize the parabolic dispersion relation of a planar one-dimensional photonic crystal cavity, which acts as the dispersive element, to determine the entire transfer function of the spectrometer using measurements made at only two wavelengths. Using this approach, we demonstrate reliable reconstruction of input spectra in simulations, even in the presence of noise. The experimentally reconstructed spectra also follow the spectra measured using a commercial spectrometer.

@en