SRON (Netherlands Institute for Space Research) is developing the focal plane assembly (FPA) for Athena X-IFU, whose demonstration model (DM) will use for the first time a time domain multiplexing (TDM)-based readout system for the on-board transition-edge sensors (TES). We report on the characterization activities on a TDM setup provided by NASA goddard space flight center (GSFC) and national institute for standards and technology (NIST) and tested in SRON cryogenic test facilities. The goal of these activities is to study the impact of the longer harness, closer to X-IFU specs, in a different EMI environment and switching from a single-ended to a differential readout scheme. In this contribution we describe the advancement in the debugging of the system in the SRON cryostat, which led to the demonstration of the nominal spectral performance of 2.8 eV at 5.9 keV with 16-row multiplexing, as well as an outlook for the future endeavors for the TDM readout integration on X-IFU’s FPA-DM at SRON.

@en

We report on the x-ray background rate measured with transition-edge sensors (TES) micro-calorimeters under frequency-domain multiplexing (FDM) readout as a possible technology for future experiments aiming at a direct detection of axion-like particles. Future axion helioscopes will make use of large magnets to convert axions into photons in the keV range and x-ray detectors to observe them. To achieve this, a detector array with high spectral performance and extremely low background is necessary. TES are single-photon, non-dispersive, high-resolution micro-calorimeters and represent a possible candidate for this application. We have been developing x-ray TES micro-calorimeters and an FDM readout technology in the framework of the space-borne x-ray astronomical observatories. We show that the current generation of our detectors is already a promising technology for a possible axion search experiment, having measured an x-ray background rate of 2.2(2) × 10⁻⁴ cm⁻² s⁻¹ keV⁻¹ with a cryogenic demonstrator not optimized for this specific application. We then make a prospect to further improve the background rate down to the required value ( < 1 0 − 7 cm⁻² s⁻¹ keV⁻¹) for an axion-search experiment, identifying no fundamental limits to reach such a level.

@en

Transition-edge-sensor (TES) microcalorimeters and bolometers are used for a variety of applications.The sensors are based on the steep temperature-dependent resistance of the normal-to-superconducting transition, and are thus intrinsically sensitive to magnetic fields. Conventionally the detectors are shielded from stray magnetic fields using external magnetic shields. However, in particular for applications with strict limits on the available space and mass of an instrument, external magnetic shields might not be enough to obtain the required shielding factors or field homogeneity. Additionally, these shields are only effective for magnetic fields generated external to the TES array, and are ineffective to mitigate the impact of internally generated magnetic fields. Here we present an alternative shielding method based on a super-conducting groundplane deposited directly on the backside of the silicon nitride membrane on which the TESs are located. We demonstrate that this local shielding for external magnetic fields has a shielding factor of at the least approximately 80, and is also effective at reducing internal self-induced magnetic fields, as demonstrated by measurements and simulation of the eddy current losses in our ac-biased detectors. Measurements of 5.9-keV x-ray photons show that our shielded detectors have a high resilience to external magnetic fields, showing no degradation of the energy resolution or shifts of the energy-scale calibration for fields of several microtesla, values higher than expected in typical real-world applications.@en

Hot Universe Baryon Surveyor (HUBS), a Chinese space mission, is proposed to find a large fraction of the so-called missing baryons, which would help us to understand more about the structure formation and evolution of the universe. Both theoretical and experimental results show that developing a highly efficient soft X-ray spectrometer over a large field of view and with a high energy resolution is the key to detect the “missing baryons”. X-ray microcalorimeters based on a transition-edge sensor (TES) array is required for HUBS, which aims to have 1 deg² field of view (FoV) with 1' angular resolution and 2 eV energy resolution optimized around 0.6 keV. Taking the high throughput X-ray optical focusing system on HUBS into account, the TES array is designed to have 60 x 60 pixels with an area of 1 mm² for each pixel. The microcalorimeter consists of a TES, a weak thermal link to a heat bath, and a semi-metal or normal metal absorber to increase the X-ray absorption efficiency. When an X-ray photon with a given energy is absorbed, the temperature of the absorber increase, that can be monitored by measuring the resistance change of the TES. A bilayer of a superconductor and a normal metal is used to fabricate a TES with a critical temperature (Tc) of ~100 mK. The latter is set for the required energy resolution. For HUBS, both MoCu and TiAu TES technologies are considered in its development phase. Here we will focus on TiAu TES calorimeters designed and partially fabricated at SRON for HUBS. Recent demonstration of a resolution of 2.5 eV at 5.9 keV in an AC readout at SRON for X-IFU on board of Athena illustrates the promising of this technology. However, the challenging for the HUBS array is the large pixel size. We will report the design and fabrication of prototype HUBS calorimeters.

@en