We present the preliminary results of an InSAR analysis of peatland surface motion covering a large spatial and temporal extent. This work is the first large scale analysis of the Dutch Green Heart region, and is made possible using a novel distributed scatter (DS) InSAR processing method. This method is designed to handle breakages in the observed interferometric phase time series which occur due to temporal decorrelation, which we designate with the term loss-of-lock.

@en

We introduce SARXarray and STMtools, two python libraries designed to support the exploitation of modern Interferometric Synthetic Aperture Radar (InSAR) data by enabling handling of larger-than memory datasets and the incorporation and fusion with relevant contextual information.The libraries are developed upon two innovative and well-established open-source Python libraries:Xarray [5] and Dask [6]. They are implemented as Xarray extensions. SARXarray is designed to manipulate and operate on larger-than-memory coregistered raster stacks such as Single-look Complex images (SLC) or interferograms, performing scatterer selection and producing STM objects. STMtools leverage the Space-Time Matrix (STM) concept [3,4] and provides functionalities to process STM and perform enrichment/data fusion with other data sources.Both libraries are built on the Xarray library, providing support for a wide range of data formats, and utilize Dask for parallel computation, making them scalable for distributed computation infrastructures. By enabling InSAR data analysis incorporating contextual information, the two libraries enhance the potential to uncover underlying mechanisms driving deformation phenomena.

@en

The growing availability of SAR data offers a real-time deformation monitoring opportunity, but data utilization can be inefficient. Our study introduces a mathematical framework using recursive least-squares and the wrapped phase, allowing efficient updates when new data arrives. This method also incorporates prior knowledge about signal smoothness for non-linear displacement estimation. Compared to the batch solution, our recursive approach achieves parameter estimation without storing past measurements while respecting signal smoothness constraints.

@en

InSAR enables the estimation of displacements of (objects on) the earth's surface. To provide reliable estimates, both a stochastic and mathematical model are required. However, the intrinsic problem of InSAR is that both are unknown. Here we derive the Variance-Covariance Matrix (VCM) for double differenced phase observations for an arc, i.e., the phase difference between two points relative to a reference epoch. Using the Normalized Amplitude Dispersion we subdivide the time series in multiple partitions. The method results in a more realistic stochastic model, and consequently more realistic and reliable displacement parameters. The stochastic model also allows to make statements on the precision and reliability of the estimated parameters.

@en

The observed phase in time series of interferometric synthetic aperture radar (InSAR) products is a superposition of various components. Differential topography, line-of-sight displacements, and differential atmospheric delays are the main contributions and need to be disentangled to derive accurate digital elevation model (DEM), deformation, or atmospherical products from InSAR. However, isolating the atmospheric component has been proven difficult as it is spatiotemporally highly dynamic and a superposition of two atmospheric states. Here, we propose an approach to parameterize the stochastic properties of the single-epoch atmospheric delay field as a way to define the atmospheric signal. We found that the atmospheric signal of a time series of interferograms can be characterized by structure functions, which can be used to isolate the single-epoch structure functions. Due to the scaling properties of the atmospheric signal, it is then possible to construct a parametric function per SAR acquisition, using two isotropic and three anisotropic parameters. In particular, the isotropic parameters for the short-distance variation and long-distance variation in atmospheric delay can be used to characterize the atmospheric signal. For a test set of 151 Sentinel-1 acquisitions, this results in an atmospheric energy range of about 10 for short-distance scales and about 50 for long-distance scales. Our parameterization demonstrates that we can describe the spatiotemporal variability of InSAR atmospheric delays, which provides a measure for atmospheric noise for individual epochs in deformation time series based on distance and azimuth.

@en

We introduce the term loss-of-lock to describe a specific form of coherence loss that results in the breakage of a synthetic aperture radar interferometric (InSAR) time series. Loss-of-lock creates a specific pattern in the coherence matrix of a multilooked distributed scatterer (DS) by which it may be detected. Along with identification, we introduce a new DS processing methodology that is designed to mitigate the effects of loss-of-lock by introducing contextual data to assist in the time-series processing. This methodology is of particular relevance to regions that suffer from severe temporal decorrelation, such as northern peatlands. We apply our new method to two subsiding cultivated peatland regions in The Netherlands which previously proved impossible to monitor using DS InSAR techniques. Our results show a very good agreement with in situ validation data as well as spatial correlation between regions and the natural terrain.

@en

The continuous monitoring of ground deformations can be provided by various methods, such as leveling, photogrammetry, laser scanning, satellite navigation systems, Synthetic Aperture Radar (SAR), and many others. However, ensuring sufficient spatiotemporal resolution of high-accuracy measurements can be challenging using only one of the mentioned methods. The main goal of this research is to develop an integration methodology, sensitive to the capabilities and limitations of Differential Interferometry SAR (DInSAR) and Global Navigation Satellite Systems (GNSS) monitoring techniques. The fusion procedure is optimized for local nonlinear strong deformations using the forward Kalman filter algorithm. Due to the impact of unexpected observations discontinuity, a backward Kalman filter was also introduced to refine estimates of the previous system’s states. The current work conducted experiments in the Upper Silesian coal mining region (southern Poland), with strong vertical deformations of up to 1 m over 2 years and relatively small and horizontally moving subsidence bowls (200 m). The overall root-mean-square (RMS) errors reached 13, 17, and 35 mm for Kalman forward and 13, 17, and 34 mm for Kalman backward in North, East, and Up directions, respectively, in combination with an external data source - GNSS campaign measurements. The Kalman filter integration outperformed standard approaches of 3-D GNSS estimation and 2-D InSAR decomposition.

@en

Phase unwrapping, also known as ambiguity resolution, is an underdetermined problem in which assumptions must be made to obtain a result in SAR interferometry (InSAR) time series analysis. This problem is particularly acute for distributed scatterer InSAR, in which noise levels can be so large that they are comparable in magnitude to the signal of investigation. In addition, deformation rates can be highly nonlinear and orders of magnitude larger than neighboring point scatterers, which may be part of a more stable object. The combination of these factors has often proven too challenging for the conventional InSAR processing methods to successfully monitor these regions. We present a methodology which allows for additional environmental information to be integrated into the phase unwrapping procedure, thereby alleviating the problems described above. We show how problematic epochs that cause errors in the temporal phase unwrapping process can be anticipated by the machine learning algorithms which can create categorical predictions about the relative ambiguity level based on the readily available meteorological data. These predictions significantly assist in the interpretation of large changes in the wrapped interferometric phase and enable the monitoring of environments not previously possible using standard minimum gradient phase unwrapping techniques.

@en

Peat areas in the Netherlands are expected to exhibit extremely dynamic vertical motion, including both reversible and irreversible components. Yet the exact behaviour as a function of time is unknown, and is spatially very variable. This results in a poorly known estimation of greenhouse gas emissions and impact to existing infrastructure, and consequently limited ability to design and deploy mitigating or adaptive measures. In situ measurements are inefficient to capture this dynamic spatio-temporal variability. To monitor wide areas, InSAR has the necessary coverage, resolution, and high temporal sampling, but is very sensitive to noise due to temporal decorrelation of vegetated areas, which in combination with the high temporal dynamics exacerbates the success rate of the phase ambiguity estimation. Moreover, motion measured with InSAR is inherently relative to a reference point which is typically not stable in time. Thus even if InSAR would yield sufficiently coherent results, interpretation is notoriously difficult. To address these problems, an Integrated Geodetic Reference Station (IGRS) was installed in a peat area. It includes SAR reflectors mechanically coupled to a GNSS antenna. Arcs from the IGRS to natural scatterers can therefore be connected to ETRS89. The resulting arcs are thus single-differences of elevation with respect to a reference epoch. In order to reduce noise, and subsequently increase the success rate of ambiguity resolution, we define Elementary Usage Polygons (EUPs), which are expected to move homogeneously. This is achieved by constraining each EUP to have only one subsurface type and one land usage, which allows for the definition of an expected functional model of the vertical movement. Using the expected functional model in combination with the GNSS measurements on the IGRS we can constrain the unwrapping on the arcs between the IGRS and nearby EUPs in order to improve the success rate of the unwrapping. By making use of elevation model data from 2020, the elevation of the reference epoch can be constrained. The single-difference arcs showing elevation change with respect to the reference epoch are transformed into elevations with respect to NAP, allowing for an absolute elevation time series from InSAR observations in the vegetated rapid-moving peat areas of the Netherlands.@en

Numerical weather prediction (NWP) models are used to predict the weather based on current observations in combination with physical and mathematical models. Yet, they are limited by the spatial density and the accuracy of the available observations. Satellite radar interferometry (InSAR) is known to be extremely sensitive to the 3D atmospheric refractivity distribution, and has a high spatial resolution, providing information that can be used for assimilation in NWP models. However, due to the inherent superposition of two or more atmospheric states, only biased and temporally differenced signals can be retrieved, that can also be contaminated by deformation signals and decorrelation. Here we present a method to estimate single-epoch absolute atmospheric delays by combining InSAR time series with prior NWP model prediction time series, using a constrained least-squares estimation. We show that this leads to a solution that reliably extracts the single-epoch relative delays from InSAR data and uses prior NWP model data to find the absolute reference for these delays, while mitigating long-term deformation and decorrelation signal. This approach leads to repetitive delay updates with a spatial resolution of 500 m, that can be directly assimilated into numerical weather models.

@en

Synthetic aperture radar (SAR) missions with short repeat times enable opportunities for near real-time deformation monitoring. Traditional multitemporal interferometric SAR (MT-InSAR) is able to monitor long-term and periodic deformation with high precision by time-series analysis. However, as time series lengthen, it is time-consuming to update the current results by reprocessing the whole dataset. Additionally, the number of coherent scatterers varies over time due to disappearing and emerging scatterers due to inevitable changes in surface scattering, and potential deformation anomalies require changes in the prevailing deformation model. Here, we propose a novel method to analyze InSAR time series recursively and detect both significant changes in scattering as well as deformation anomalies based on the new acquisitions. Sequential change detection is developed to identify temporary coherent scatterers (TCSs) using amplitude time series. Based on the predicted phase residuals, scatterers with abnormal deformation displacements are identified by a generalized ratio test, while the parameters of stable scatterers are updated using Kalman filtering. The quality of the anomaly detection is assessed based on the detectability power and the minimum detectable deformation. This facilitates (near) real-time data processing and decreases the false alarm likelihood. Experimental results show that the technique can be used for the real-time evaluation of deformation risks.

@en

Landslides are a major geohazard in hilly and mountainous environments. In-situ inspection of downslope motion is costly, sometimes dangerous and, requires prior knowledge of the existence of a landslide. Remote sensing from space is a way to detect and characterize landslides systematically at large scale. Interferometric Synthetic Aperture Radar (InSAR) has shown to be a valuable resource of deformation information, but it requires expert knowledge and considerable computational efforts. Moreover, the successful application of InSAR for landslides requires a favorable acquisition geometry relative to the landslide deformation pattern. Consequently, there is a need for a widely applicable tool to assess the potential of InSAR at a particular location a priori. Here we present a novel, generic approach to assess the potential of InSAR-based deformation tracking, providing a standardised and automated method applicable on any slope. We define the detection potential as the sensitivity of InSAR to detect downslope displacement combined with the presence of coherently scattering surfaces. We show that deformation can be detected on at least 91% of the global landslide-prone slopes, and provide an open source Google Earth Engine tool for the quick assessment of the availability of potential coherent scatterers. This tool enables any person interested in applying InSAR to routinely assess the potential for monitoring landslide deformation in their region of interest.@en

We present a novel InSAR processing scheme which combines point scatterer (PS) and distributed scatter (DS) approaches in a hybrid framework along with contextual information about the environment under study. Data such as land parcel divisions, precipitation and temperature are integrated into the processing pipeline in order to produce accurate deformation time series estimates of the Dutch peatlands. In addition to these steps, a segmented processing scheme is introduced to manage irreversible losses of coherence in the interferogram stack. Initial results show a promising agreement with in-situ ground truth measurements gathered by extensometer readings of shallow surface deformation.@en

This book provides an introduction, at academic level, into the field of surveying and mapping. The book has been compiled based on hand-outs and readers written for the third-year course Surveying and Mapping, in the bachelor program Civil Engineering at Delft University of Technology. This book covers a wide range of measurement techniques, from land surveying, GPS/GNSS and remote sensing to the associated data processing, the underlying coordinate reference systems, as well as the analysis and visualization of the acquired geospatial information.@en

InSAR and GNSS not only provide an additional source of ground motion measurements with respect to the conventional techniques, with different characteristics, also the data volumes increased significantly. This poses challenges on the integration of the various data sets available. The Integrated Geodetic Processing (IGP) software provides a systematic framework for the integration of geodetic data, including testing and quality assessment. The concept of the software is described, as well as an illustrative example of the output.@en

In radar interferometry, the method of storage for coherent scatterers and their attributes directly influences the ability for interpretation. Especially with the complexity and ambiguity of InSAR observations, the need for a consistent and queryable spatial data-platform becomes relevant. Our proposed method uses the concept of a spacetime matrix to store the coherent scatterers, implemented by means of a spatial database. The stored InSAR data are partitioned in modules of the displacement time series, inherent scatterer and processing-related attributes, and their corresponding contextual attributes. Data and context-driven queries are facilitated by the use of spatial indices. The method is illustrated by a case study for building stability in the northwestern part of Rotterdam, the Netherlands. The contextual attributes used characterize building foundations in part of the city.@en

In this work, we investigate if, when, and how satellite InSAR can be used for evaluating surface settlements that occur during shield tunnelling in soft soil areas. We evaluate the applicability of InSAR prior, during, and after tunnel construction. Special emphasis is placed on the influence of the InSAR phase ambiguities in relation to short-term settlements that may occur during tunnel construction. We demonstrate that a rough analytic settlement prediction can be sufficient to resolve the most probable phase ambiguity level, leading to an augmented implementation of InSAR. We use the shield tunnel of the in North/South Metro Line Amsterdam as a case study, where surface levelling data is available to assess and validate the results. We conclude that InSAR is a valuable complementary source of information as it provides data outside the area of the conventional surveying benchmarks and it reveals relevant information about settlement patterns before and after traditional construction monitoring periods.@en

The estimation of Signal-to-Clutter Ratio (SCR) of a radar point target, such as a corner reflector, is an essential step for synthetic aperture radar (SAR) interferometry and positioning, as it influences the phase measurement variance as well as the absolute positioning precision. The standard method to estimate the SCR of a point target relies on the debatable assumption of spatial ergodicity, using the clutter of the surrounding as representative of the clutter at the point target. Here, we estimate the SCR of a corner reflector using a time series of SAR measurements, i.e.,\ assuming temporal ergodicity. This assumption is often more realistic, particularly in a complex environment, in the presence of other point scatterers, and for small-sized reflectors. Empirical results on a corner reflector network, using Sentinel-1 SAR measurements, show that the temporal method yields a less biased and more precise estimate of the average SCR. A second experiment shows that the InSAR phase variance as well as positioning precision, predicted using SCR estimated by the temporal estimation method, is closer to the truth.

@en

This paper investigates the use of InSAR data during shield tunnel construction when short-term settlements occur within a few days. Additionally, the long-term settlement, which occur over several years, in the vicinity of these tunnels are evaluated with inSAR. The North-South Line in Amsterdam is used as a case study for this research. We used the settlement during construction as a-priori information to determine the most likely unwrapping solution for a few selected InSAR points. Then we verified this outcome with the traditional monitoring of the surface levelling points during construction and finally used only the InSAR to evaluate the long-term settlements. We conclude that with prior information InSAR data can be processed correctly and that InSAR can capture the short-term settlement that occur immediately during construction of a shield tunnel. Also, InSAR is a valuable complementary source of information because it provides data outside the area of the levelling points and gives information about settlement patterns prior to and after construction.

@en

The main objective of this paper is to develop and evaluate a pragmatic approach to obtain an InSAR stochastic model for reduced InSAR datasets. This goal is achieved by calculation of the stochastic parameters per InSAR stack, propagating the noise structure to reduced datasets. The propagation of full covariance matrices when using a reduced dataset in space and time is avoided, using the derived analytical functions. This way, a computationally efficient approximation of the exact covariance matrix is obtained for reduced datasets.@en