This work examines the thermochemistry of the chromium difluoride CrF₂ corrosion product in the molten [Formula presented] fuel salt system. Through a combination of experimental investigations and thermodynamic modeling assessment, the study elucidates the thermodynamic properties, phase diagram equilibria, and overall thermodynamic behavior of CrF₂ corrosion product, following dissolution from a structural material to the molten salt fuel environment. In this work, two different synthesis methods were developed for pure CrF₂, further allowing to experimentally measure the phase equilibria in the [Formula presented], [Formula presented], and [Formula presented] systems. Then, thermodynamic models were developed using the CALPHAD method based on the quasichemical model in the quadruplet approximation.

The thermodynamic and thermo-physical properties of the molten salt system [Formula presented] have been investigated using an experimental and modelling approach. This molten salt system includes a single intermediate compound [Formula presented], whose structure has been investigated using X-ray and neutron diffraction. Furthermore, this system exhibits solubility of [Formula presented] in [Formula presented] at high temperatures up to a concentration of around 25% [Formula presented] at 1060 K. Additionally, our measurements show solubility of [Formula presented] in [Formula presented] up to about 5% [Formula presented] at 973 K. The investigation of these solid solutions has been performed using quenching experiments and subsequent post-characterisation by X-ray diffraction (XRD). Phase diagram equilibria have also been investigated using differential scanning calorimetry (DSC). Using the aforementioned information on phase transitions, intermediate compound formation, and mutual solid solubility, a thermodynamic assessment of the system has been performed using the CALPHAD method. The model for the Gibbs energy of the liquid solution is the quasi-chemical formalism in the quadruplet approximation, while the model for the Gibbs energy of the solid solutions is a two-sublattice polynomial model.

The thermochemistry of the ternary system CsI-PbI₂-BiI₃, of interest for applications in photovoltaics, memory devices, and nuclear applications, among other things, is investigated in this work. The binary phase diagrams CsI-PbI₂ and CsI-BiI₃ were subjected to renewed experimental investigation, and the compounds CsPbI₃, Cs₄PbI₆, and Cs₃Bi₂I₉ were found to be the only stable phases in the investigated temperature window. The liquidus lines and invariant equilibria were determined. The phase equilibria in the BiI₃-PbI₂ system were measured for the first time by using Differential Scanning Calorimetry (DSC). The end-members form a solid solution over the entire composition range. The pseudobinary section CsPbI₃-Cs₃Bi₂I₉ of the CsI-PbI₂-BiI₃ ternary system was moreover measured by DSC, as well as the ternary eutectic points. A thermodynamic model of the complete CsI-PbI₂-BiI₃ system was developed by using the Compound Energy Formalism (CEF) for the solid phases and the Modified Quasichemical Model in the Quadruplet Approximation (MQMQA) for the liquid phase. The binary systems were modeled first, and no ternary interaction parameters were found necessary to reproduce accurately the phase equilibria in the ternary system. With our model, the whole liquidus surface of the field CsI-PbI₂-BiI₃ is described for the first time.

The quaternary compound Cs₂Pb(MoO₄)₂ was synthesized and its structure was characterized using X-ray and neutron diffraction from 298 to 773 K, while thermal expansion was studied from 298 to 723 K. The crystal structure of the high-temperature phase β-Cs₂Pb(MoO₄)₂ was elucidated, and it was found to crystallize in the space group R3̅m (No. 166), i.e., with a palmierite structure. In addition, the oxidation state of Mo in the low-temperature phase α-Cs₂Pb(MoO₄)₂ was studied using X-ray absorption near-edge structure spectroscopy. Phase diagram equilibrium measurements in the Cs₂MoO₄-PbMoO₄ system were performed, revisiting a previously reported phase diagram. The equilibrium phase diagram proposed here includes a different composition of the intermediate compound in this system. The obtained data can serve as relevant information for thermodynamic modeling in view of the safety assessment of next-generation lead-cooled fast reactors.

The heat capacities of CsPbI₃, Cs₄PbI₆, and Cs₃Bi₂I₉ were studied using low-temperature thermal relaxation calorimetry in the temperature range of 1.9-300 K. The three compounds are insulators, with no electronic contribution to the heat capacity. None of them show detectable anomalies in the studied temperature window. Thermodynamic properties at standard conditions are derived. Previously reported results on Cs₃Bi₂I₉ are not fully consistent with the present findings. Moreover, the magnetic susceptibilities of the three title compounds were measured.

Chloride salts are considered a good alternative to fluoride salts as fuel carrier in the Molten Salt Fast Reactor concepts. The NaCl–ThCl4–PuCl3 fuel salt solution seems very promising, with low melting temperature eutectic compositions, and the potential to be used in a breeder and burner type of reactor design. This work focuses on the first thermodynamic modeling assessment of the ThCl4–PuCl3 binary system and the NaCl–ThCl4–PuCl3 ternary system, using the CALPHAD (Computer Coupling of Phase Diagrams and Thermochemistry) method and the quasichemical formalism in the quadruplet approximation. The investigated system shows potential for a high flexibility with respect to composition at operating temperatures, which can be beneficial to accommodate the requirements on other essential fuel properties (e.g. neutronic and thermo-hydraulic).

CALPHAD models to compute the density and viscosity of four keystone systems related to Molten Salt Reactor (MSR) technology have been optimized: NaCl-UCl₃, LiF-ThF₄, LiF-UF₄, and LiF-ThF₄-UF₄. Revised thermodynamic assessments of all four systems, using the modified quasichemical formalism in the quadruplet approximation for the description of the liquid solutions, are reported. In the case of NaCl-UCl₃, phase diagram and mixing enthalpy data available in the literature are taken into account. For the fluoride systems, recently published data on some solid phases are taken into account, while retaining the most recently published descriptions of the liquid solutions. The densities of the liquid solutions are modelled using pressure-dependent terms of the excess Gibbs energy, while the viscosities are then modelled using an Eyring equation. Both state functions are related to the thermodynamic assessments through the quadruplet distributions.