Meeting the current demand for concrete requires not only mining tons of gravel and sand, but also burning large amounts of fossil fuel resources in cement kilning. Consequently, concrete recycling is crucial to achieving a material-efficient society, especially with the application of various categories of concrete and the goal of phasing out fossil fuels. A comparative life cycle assessment (LCA) is used to assess the engineering material footprint (EMF) and the fossil fuel material footprint (FMF) in closed-loop recycling of three types of concrete: siliceous concrete, limestone concrete, and lightweight aggregate concrete. This study aims to investigate the impact of (i) concrete categories, (ii) methods to model recycling, and (iii) using renewable energy sources on the material footprint in concrete recycling. The results highlight that the concrete recycling system can reduce 99% of the EMF and 66–93% of the FMF compared with the baseline system, in which concrete waste is landfilled. All three recycling modeling approaches indicate that concrete recycling can considerably reduce EMF and FMF compared with the baseline system, primarily resulting from the displacement of virgin raw materials. Using alternative diesels is more sensitive than adopting renewable electricity in reduction of the FMF in concrete recycling. Replacing diesel with electrolysis- and coal-based synthetic diesel for concrete recycling could even increase the FMF, while using biodiesel made from rapeseed and wood-based synthetic diesel can reduce 47–51% and 84–89% of the FMF, respectively, compared to the virgin diesel-based recycling system. Finally, we discussed the multifunctionality and rebound effects of recycling, and double-counting risk in material and energy accounting.

@en

In terms of mass, construction materials and construction and demolition waste make up the largest part of humankind's material and waste footprints, particularly after an energy transition has largely phased out fossil energy. However, a circular use of building and construction materials is fraught with challenges.

@en

The construction sector is the biggest driver of resource consumption and waste generation in Europe. The European Union (EU) is making efforts to move from its traditional linear resource and waste management system in the construction sector to a level of high circularity. Based on the theory of circular economy, a new paradigm called waste hierarchy was introduced in the EU Waste Framework Directive. This work uses the framework of the waste hierarchy to analyze the practice of construction and demolition waste (CDW) management in Europe. We explore the evolution of the waste hierarchy in Europe and how it compares with the circular economy. Then, based on the framework, we analyze the performance of CDW management in each EU member state. Innovative treatment methods of CDW, focusing on waste concrete, is investigated. This brings insight into optimizing and upgrading the CDW management in light of advanced technologies and steering the pathway for transitioning the EU towards a circular society.

@en

Energy efficiency plays an essential role in energy conservation and emissions mitigation efforts in the building sector. This is especially important considering that the global building stock is expected to rapidly expand in the years to come. In this study, a global-scale modeling framework is developed to analyze the evolution of building energy intensity per floor area during 1971–2014, its relationship with economic development, and its future role in energy savings across 21 world regions by 2060. Results show that, for residential buildings, while most high-income and upper-middle-income regions see decreasing energy intensities and strong decoupling from economic development, the potential for further efficiency improvement is limited in the absence of significant socioeconomic and technological shifts. Lower-middle-income regions, often overlooked in analyses, will see large potential future residential energy savings from energy intensity reductions. Harnessing this potential will include, among other policies, stricter building efficiency standards in new construction. For the commercial sector, during 1971–2014, the energy intensity was reduced by 50% in high-income regions but increased by 193% and 44% in upper-middle and lower-middle-income regions, respectively. Given the large energy intensity reduction potential and rapid floor area growth, commercial buildings are increasingly important for energy saving in the future.

@en

Urban mining from construction and demolition waste (CDW) is highly relevant for the circular economy ambitions of the European Union (EU). Given the large volumes involved, end-of-life (EoL) concrete is identified as one of the priority streams for CDW recycling in most EU countries, but it is currently largely downcycled or even landfilled. The European projects C2CA and VEEP have proposed several cost-effective technologies to recover EoL concrete for new concrete manufacturing. To understand the potential effects of large-scale implementation of those recycling technologies on the circular construction, this study deployed static material flow analysis (MFA) for a set of EoL concrete management scenarios in the Netherlands constructed by considering the development factors in two, technological and temporal dimensions. On the technological dimension, three treatment systems for EoL concrete management, namely: business-as-usual treatment, C2CA technological system and VEEP technological system were investigated. On the temporal dimension, 2015 was selected as the reference year, representing the current situation, and 2025 as the future year for the prospective analysis. The results show that the development of cost-effective technologies has the potential to improve the share of recycling (as opposed to downcycling) in the Netherlands from around 5% in 2015 up to 22%–32% in 2025. From the academic aspect, the presented work illustrates how the temporal dimension can be included in the static MFA study to explore the potential effects in the future.

@en

The increasing volume of Construction and demolition waste (CDW) associated with economic growth is posing challenges to the sustainable management of the built environment. The largest fraction of all the CDW generated in the member states of the European Union (EU) is End-of-life (EOL) concrete. The most widely applied method for EOL concrete recovery in Europe is road base backfilling, which is considered low-grade recovery. The common practice for high-grade recycling is wet process that processes and washes EOL concrete into clean coarse aggregate for concrete manufacturing. It is costly. As a result, a series of EU projects have been launched to advance the technologies for high value-added concrete recycling. A critical environmental and economic evaluation of such technological innovations is important to inform decision making, while there has been a lack of studies in this field. Hence the present study aimed to assess the efficiency of the technical innovations in high-grade concrete recycling, using an improved eco-efficiency analytical approach by integrating life cycle assessment (LCA) and life cycle costing (LCC). Four systems of high-grade concrete recycling were analyzed for comparison: (i) business-as-usual (BAU) stationary wet processing; (ii) stationary advanced dry recovery (ADR); (iii) mobile ADR; (iv) mobile ADR and Heating Air Classification (A&H). An overarching framework was proposed for LCA/LCC-type eco-efficiency assessment conforming to ISO standards. The study found that technological routes that recycle on-site and produce high-value secondary products are most advantageous. Accordingly, policy recommendations are proposed to support the technological innovations of CDW management.@en

Three-dimensional (3D) printing and geo-polymers are two environmentally oriented innovations in concrete manufacturing. The 3D printing of concrete components aims to reduce raw material consumption and waste generation. Geo-polymer is being developed to replace ordinary Portland cement and reduce the carbon footprint of the binder in the concrete. The environmental performance of the combined use of the two innovations is evaluated through an ex-ante life cycle assessment (LCA). First, an attributional LCA was implemented, using data collected from the manufacturer to identify the hotspots for environmental improvements. Then, scaled-up scenarios were built in collaboration with the company stakeholder. These scenarios were compared with the existing production system to understand the potential advantages/disadvantages of the innovative system and to identify the potential directions for improvement. The results indicate that 3D printing can potentially lead to waste reduction. However, depending on its recipe, geo-polymer likely has higher environmental impacts than ordinary concrete. The ex-ante LCA suggests that after step-by-step improvements in the production and transportation of raw materials, 3D printing geo-polymer concrete is able to reduce the carbon footprint of concrete components, while it does still perform worse on impact categories, such as depletion of abiotic resources and stratospheric ozone depletion. We found that the most effective way to lower the environmental impacts of 3D concrete is to reduce silicate in the recipe of the geo-polymer. This approach is, however, challenging to realize by the company due to the locked-in effect of the previous innovation investment. The case study shows that to support technological innovation ex-ante LCA has to be implemented as early as possible in innovation to allow for maintaining technical flexibility and improving on the identified hotspots.

@en

In Maputo, the capital of Mozambique, nitrate concentrations above 250 mg L??1 in groundwater have been reported. This happens due to the widespread use of latrines and septic tanks that allow for constant infiltration of its content into the soil and eventually to groundwater sources, a situation that is widespread in the Global South and represents a serious threat for human health and for the environment. This is a reflection of limited access to safe and adequate sanitation services, which the local authorities have set to improve in the forthcoming decades with a recently commissioned city-wide sanitation masterplan serving as a basis for the works. In this article, we aimed at understanding whether the infrastructure projected in the masterplan would lead to a reduction of nitrogen reaching groundwater. Currently, according to our calculations, almost 500 onnes of nitrogen reach the city's groundwater sources each year, with the masterplan potentially resulting in a 14% reduction, a small reduction due to its reliance on maintaining and expanding fecal sludge services, without considering investments to improve domestic systems (e.g., construction of contained systems). An alternative, not presented in the Masterplan and put forward by the authors, could be the construction of simplified sewers in two of the city's most densely populated neighborhoods, with a potential 29% reduction in nitrogen reaching groundwater.

@en