Lack of knowledge and tools hampers circular transition in the construction industry. This study analyzes the potential of a framework of circular indicators put forward by the Building Research Establishment Environmental Assessment Method (BREEAM-C) as an answer to the prevailing need of a metric for building circularity assessment to promote circular construction. A qualitative analysis approach is adopted, involving literature review, comparative case study and semi-structured interviews conducted for collecting expert opinions. An in-depth scrutiny of the BREEAM-C indicators revealed that they are rooted in circular principles, cover building circularity realizable through circular strategies, and have given due consideration to circularity in different impact areas, structural layers and life-cycle stages of buildings. Moreover, BREEAM-C indicators not only show capacity in identifying CE-related practices implemented, but also serve as benchmarks testifying that CE principles/strategies are incorporated in the design, construction, operation and management of the buildings. Despite having room for expansion, BREEAM-C has proven to be applicable and practical with potential for use in Taiwan as confirmed by expert opinions. Nevertheless, adaptation/localization is required to cater for different concerns with respect to climate and safety as well as local context and legislations.

@en

Meeting the current demand for concrete requires not only mining tons of gravel and sand, but also burning large amounts of fossil fuel resources in cement kilning. Consequently, concrete recycling is crucial to achieving a material-efficient society, especially with the application of various categories of concrete and the goal of phasing out fossil fuels. A comparative life cycle assessment (LCA) is used to assess the engineering material footprint (EMF) and the fossil fuel material footprint (FMF) in closed-loop recycling of three types of concrete: siliceous concrete, limestone concrete, and lightweight aggregate concrete. This study aims to investigate the impact of (i) concrete categories, (ii) methods to model recycling, and (iii) using renewable energy sources on the material footprint in concrete recycling. The results highlight that the concrete recycling system can reduce 99% of the EMF and 66–93% of the FMF compared with the baseline system, in which concrete waste is landfilled. All three recycling modeling approaches indicate that concrete recycling can considerably reduce EMF and FMF compared with the baseline system, primarily resulting from the displacement of virgin raw materials. Using alternative diesels is more sensitive than adopting renewable electricity in reduction of the FMF in concrete recycling. Replacing diesel with electrolysis- and coal-based synthetic diesel for concrete recycling could even increase the FMF, while using biodiesel made from rapeseed and wood-based synthetic diesel can reduce 47–51% and 84–89% of the FMF, respectively, compared to the virgin diesel-based recycling system. Finally, we discussed the multifunctionality and rebound effects of recycling, and double-counting risk in material and energy accounting.

@en

In terms of mass, construction materials and construction and demolition waste make up the largest part of humankind's material and waste footprints, particularly after an energy transition has largely phased out fossil energy. However, a circular use of building and construction materials is fraught with challenges.

@en

The construction sector is the biggest driver of resource consumption and waste generation in Europe. The European Union (EU) is making efforts to move from its traditional linear resource and waste management system in the construction sector to a level of high circularity. Based on the theory of circular economy, a new paradigm called waste hierarchy was introduced in the EU Waste Framework Directive. This work uses the framework of the waste hierarchy to analyze the practice of construction and demolition waste (CDW) management in Europe. We explore the evolution of the waste hierarchy in Europe and how it compares with the circular economy. Then, based on the framework, we analyze the performance of CDW management in each EU member state. Innovative treatment methods of CDW, focusing on waste concrete, is investigated. This brings insight into optimizing and upgrading the CDW management in light of advanced technologies and steering the pathway for transitioning the EU towards a circular society.

@en

Offshore wind energy (OWE) is a cornerstone of future clean energy development. Yet, research into global OWE material demand has generally been limited to few materials and/or low technological resolution. In this study, we assess the primary raw material demand and secondary material supply of global OWE. It includes a wide assortment of materials, including bulk materials, rare earth elements, key metals, and other materials for manufacturing offshore wind turbines and foundations. Our OWE development scenarios consider important drivers such as growing wind turbine size, introducing new technologies, moving further to deep waters, and wind turbine lifetime extension. We show that the exploitation of OWE will require large quantities of raw materials from 2020 to 2040: 129–235 million tonnes (Mt) of steel, 8.2–14.6 Mt of iron, 3.8–25.9 Mt of concrete, 0.5–1.0 Mt of copper and 0.3–0.5 Mt of aluminium. Substantial amounts of rare earth elements will be required towards 2040, with up to 16, 13, 31 and 20 fold expansions in the current Neodymium (Nd), Dysprosium (Dy), Praseodymium (Pr) and Terbium (Tb) demand, respectively. Closed-loop recycling of end-of-life wind turbines could supply a maximum 3% and 12% of total material demand for OWE from 2020 to 2030, and 2030 to 2040, respectively. Moreover, a potential lifetime extension of wind turbines from 20 to 25 years would help to reduce material requirements by 7–10%. This study provides a basis for better understanding future OWE material requirements and, therefore, for optimizing future OWE developments in the ongoing energy transition.

@en

Building stock growth around the world drives extensive material consumption and environmental impacts. Future impacts will be dependent on the level and rate of socioeconomic development, along with material use and supply strategies. Here we evaluate material-related greenhouse gas (GHG) emissions for residential and commercial buildings along with their reduction potentials in 26 global regions by 2060. For a middle-of-the-road baseline scenario, building material-related emissions see an increase of 3.5 to 4.6 Gt CO2eq yr-1 between 2020–2060. Low- and lower-middle-income regions see rapid emission increase from 750 Mt (22% globally) in 2020 and 2.4 Gt (51%) in 2060, while higher-income regions shrink in both absolute and relative terms. Implementing several material efficiency strategies together in a High Efficiency (HE) scenario could almost half the baseline emissions. Yet, even in this scenario, the building material sector would require double its current proportional share of emissions to meet a 1.5 °C-compatible target.@en

Urban mining from construction and demolition waste (CDW) is highly relevant for the circular economy ambitions of the European Union (EU). Given the large volumes involved, end-of-life (EoL) concrete is identified as one of the priority streams for CDW recycling in most EU countries, but it is currently largely downcycled or even landfilled. The European projects C2CA and VEEP have proposed several cost-effective technologies to recover EoL concrete for new concrete manufacturing. To understand the potential effects of large-scale implementation of those recycling technologies on the circular construction, this study deployed static material flow analysis (MFA) for a set of EoL concrete management scenarios in the Netherlands constructed by considering the development factors in two, technological and temporal dimensions. On the technological dimension, three treatment systems for EoL concrete management, namely: business-as-usual treatment, C2CA technological system and VEEP technological system were investigated. On the temporal dimension, 2015 was selected as the reference year, representing the current situation, and 2025 as the future year for the prospective analysis. The results show that the development of cost-effective technologies has the potential to improve the share of recycling (as opposed to downcycling) in the Netherlands from around 5% in 2015 up to 22%–32% in 2025. From the academic aspect, the presented work illustrates how the temporal dimension can be included in the static MFA study to explore the potential effects in the future.

@en

The increasing volume of Construction and demolition waste (CDW) associated with economic growth is posing challenges to the sustainable management of the built environment. The largest fraction of all the CDW generated in the member states of the European Union (EU) is End-of-life (EOL) concrete. The most widely applied method for EOL concrete recovery in Europe is road base backfilling, which is considered low-grade recovery. The common practice for high-grade recycling is wet process that processes and washes EOL concrete into clean coarse aggregate for concrete manufacturing. It is costly. As a result, a series of EU projects have been launched to advance the technologies for high value-added concrete recycling. A critical environmental and economic evaluation of such technological innovations is important to inform decision making, while there has been a lack of studies in this field. Hence the present study aimed to assess the efficiency of the technical innovations in high-grade concrete recycling, using an improved eco-efficiency analytical approach by integrating life cycle assessment (LCA) and life cycle costing (LCC). Four systems of high-grade concrete recycling were analyzed for comparison: (i) business-as-usual (BAU) stationary wet processing; (ii) stationary advanced dry recovery (ADR); (iii) mobile ADR; (iv) mobile ADR and Heating Air Classification (A&H). An overarching framework was proposed for LCA/LCC-type eco-efficiency assessment conforming to ISO standards. The study found that technological routes that recycle on-site and produce high-value secondary products are most advantageous. Accordingly, policy recommendations are proposed to support the technological innovations of CDW management.@en