Defects and impurities within semiconductor materials pose significant challenges. This investigation scrutinizes the response of a single dopant donor impurity located in nanostructured semiconductors, specifically quantum wells subjected to both harmonic and inharmonic confinement potentials. The primary focus of this inquiry centers on the analysis of binding energy, electron probability distribution, and diamagnetic susceptibility in connection with both the ground (1s) and excited (2p) electron states. Utilizing advanced computational techniques, specifically the Finite Elements Method (FEM) implemented through Python code, this study unveils a marked alteration in the interaction between electrons and impurities when exposed to external fields. Significantly, the characteristics of the confinement potential exert a substantial influence on the explored physical parameters. This research significantly advances our understanding of the interaction between impurities and intense fields, offering valuable insights into solid-state phenomena within low-dimensional systems. Consequently, it contributes to the design and fabrication of next-generation applications in the field of quantum well systems, encompassing areas such as lighting, detection, information processing, sensing, and energy conversion.

@en

In this study, we investigated the influence of structural parameters, including active region dimensions, electric field intensity, In-composition, impurity position, and potential profiles, on the energy levels, sub-gap transitions, and photovoltaic characteristics of a p-GaN/i-(In, Ga)N/GaN-n (p-QW-n) structure. The finite element method (FEM) has been used to solve numerically the Schrödinger equation. We found that particle and sub-gap energy levels are susceptible to well width, electric field, and impurity position. Particle energy decreases with increasing well size and electric field intensity, while impurity position affects energy based on proximity to the well center. Potential profile shapes, such as rectangular (RQW) and parabolic (PQW), also play a significant role, with PQW profiles providing stronger particle confinement. IB width increases with electric field intensity and saturates at higher In-content. Voc increases with field strength but decreases with In-content, and the parabolic profile yields higher efficiency than the rectangular one. Photovoltaic efficiency is improved with an appropriately oriented electric field and decreases with higher In-content and field intensity. These findings highlight the critical role of structural parameters in optimizing QW-IBSC performance.@en

This study presents a theoretical investigation into the photovoltaic efficiency of InGaN/GaN quantum well-based intermediate band solar cells (IBSCs) under the simultaneous influence of electric and magnetic fields. The finite element method is employed to numerically solve the one-dimensional Schrödinger equation within the framework of the effective-mass approximation. Our findings reveal that electric and magnetic fields significantly influence the energy levels of electrons and holes, optical transition energies, open-circuit voltages, short-circuit currents, and overall photovoltaic conversion performances of IBSCs. Furthermore, this research indicates that applying a magnetic field positively influences conversion efficiency. Through the optimization of IBSC parameters, an efficiency of approximately 50% is achievable, surpassing the conventional Shockley–Queisser limit. This theoretical study demonstrates the potential for next-generation photovoltaic technology advancements.@en

The paper deals with the conception and feasibility of the device structure based on the optimized PIN-(In, Ga)N homojunction solar cells. A new and efficient model combining the most realistic ones considering the impacts of band gap narrowing, collection efficiency, Shockley-Read-Hall recombination, and interface polarization is proposed to examine the solar cells' performance numerically. The functioning processes of n-In_0.42Ga_0.58N/i-(In, Ga)N/p-In_0.42Ga_0.58N solar cells at room temperature were investigated by calculating their characteristics for the AM1.5D, AM1.5G, and AM0 American Society for Testing and Materials experimental data. Our results show that the indium content, thickness, and defect density of the intrinsic layer strongly influence the characteristics of the InGaN solar cells. As the In-mole fraction increases, V_oc, FF and efficiency diminish to reach an independent regime for high In-content. A higher-quality 2μm−In_0.43Ga_0.57N for 10¹⁴cm⁻³ defect concentration can exhibit as high an efficiency as ≅11.3%, dropping to ≅4.12% for 10¹⁶cm⁻³ one.

@en

This paper presents a thorough numerical investigation focused on optimizing the efficiency of quantum-well intermediate-band solar cells (QW-IBSCs) based on III-nitride materials. The optimization strategy encompasses manipulating confinement potential energy, controlling hydrostatic pressure, adjusting compositions, and varying thickness. The built-in electric fields in (In, Ga)N alloys and heavy-hole levels are considered to enhance the results’ accuracy. The finite element method (FEM) and Python 3.8 are employed to numerically solve the Schrödinger equation within the effective mass theory framework. This study reveals that meticulous design can achieve a theoretical photovoltaic efficiency of quantum-well intermediate-band solar cells (QW-IBSCs) that surpasses the Shockley–Queisser limit. Moreover, reducing the thickness of the layers enhances the light-absorbing capacity and, therefore, contributes to efficiency improvement. Additionally, the shape of the confinement potential significantly influences the device’s performance. This work is critical for society, as it represents a significant advancement in sustainable energy solutions, holding the promise of enhancing both the efficiency and accessibility of solar power generation. Consequently, this research stands at the forefront of innovation, offering a tangible and impactful contribution toward a greener and more sustainable energy future.@en

Desert environments are prime locations for concentrated solar power (CSP) applications due to abundant direct normal irradiance. Despite this advantage, the accumulation and adhesion of dust on CSP mirror surfaces present significant challenges to plant efficiency. This paper comprehensively explores soiling phenomena and dust adhesion mechanisms, complemented by advanced measurement techniques tailored for CSP reflector mirrors. By elucidating the factors influencing dust accumulation and delving into the thermodynamics of self-cleaning coatings, alongside an analysis of various mirror materials, this study aims to enrich our understanding of soiling in CSP systems. This study aims to provide valuable insights that will help develop strategies to reduce dust-related efficiency losses in CSP plants, ultimately supporting the development of more reliable and sustainable solar energy solutions for the MENA region. @en

Photonic crystal (PhC) has been studied for their potential to improve the efficiency of Cu₂ZnSnS₄ solar cells by increasing the generated photocurrent by integrating it as a back reflector with almost zero transmission through the absorption active zone of the solar cell. It was found that the thickness of PhC layers greatly affects the width of the photonic bandgap and that increasing the thickness of VO₂ causes it to shift to a higher wavelength range. The PhC layers were added at the back side of the solar cell in two different configurations: (Monoclinic (M) VO₂/TiO₂) and (Tetragonal (T) VO₂/TiO₂) via SCAPS model. The study found that the (M VO₂/TiO₂) configuration led to an enhancement of the device's efficiency from 11.02 to 12.79%, while the (T VO₂/TiO₂) reaches 16.88%. The study concluded that the PhC layers enhance the light-matter coupling and photonic coupling and improvement in the device's performance.

@en

This study investigates the degradation of the silicon NPN transistor’s emitter-base junction, specifically the 2N2219A model, under both forward and reverse polarization. We examine the current–voltage characteristics under the influence of 1 MeV proton irradiation at various fluencies, which are 5.3×108,5.3×1010,5×1011,5×1012, and 5×1013 protons/cm², all conducted at 307 K. The experimental findings elucidate a pronounced dependency of diode parameters, including the reverse saturation current, series resistance, and the non-idealist factor, on the incident proton flow. This observation underscores that proton-induced degradation is primarily driven by displacement damage, while recorded degradation is predominantly attributed to the generation of defects and interfacial traps within the transistor resulting from exposure to high-energy radiation. Our findings indicate that the effects of irradiation align more closely with the compensation phenomenon in doping rather than its reinforcement.@en

In this study, we delved into the influence of Ir nanofilm coating thickness on the optical and optoelectronic behavior of ultrathin MoO3 wafer-scale devices. Notably, the 4 nm Ir coating showed a negative Hall voltage and high carrier concentration of 1.524 × 1019 cm−3 with 0.19 nm roughness. Using the Kubelka–Munk model, we found that the bandgap decreased with increasing Ir thickness, consistent with Urbach tail energy suggesting a lower level of disorder. Regarding transient photocurrent behavior, all samples exhibited high stability under both dark and UV conditions. We also observed a positive photoconductivity at bias voltages of >0.5 V, while at 0 V bias voltage, the samples displayed a negative photoconductivity behavior. This unique aspect allowed us to explore self-powered negative photodetectors, showcasing fast response and recovery times of 0.36/0.42 s at 0 V. The intriguing negative photoresponse that we observed is linked to hole self-trapping/charge exciton and Joule heating effects.@en

The BTO, BFTC, and BCTF compounds were synthesized by the sol-gel method. The XRD study revealed the formation of single-phase tetragonal perovskite structures with the space group (P4mm). The crystalline parameters were studied as a function of Fe and Co contents and occupation of Ba and/or Ti sites by Fe and Co in the BTO lattice. It was found that the obtained strain increases when Ba²⁺ is substituted by Co²⁺ and Ti⁴⁺ by Fe³⁺. The Raman investigation confirmed the existence of three active modes (B1/E (TO1LO), (E (TO)/A1(TO3), and (A 1(LO)/E (TO), all of which are related to the existence of the tetragonal phase and strongly support the XRD results. The microstructural study showed a clear correlation between the presence of Fe and Co and the grain size distribution. Optical studies revealed the improvement in band gap energy with transition-metal (Fe and Co) co-doped BTO ceramics. The decrease in the band gap is explained by the competing effects of Columbian interactions, microdeformation, and oxygen defects. The results indicate that the presence of Fe and Co dopants enhances the absorption in the BTO ceramic. The dopants demonstrated an effect on thermal conductivity: they decreased the thermal conductivity of BTO, which is in the range of 0.76-2.23 W m^-1 K^-1 at room temperature and 2.02-0.27 W m^-1 K^-1 at elevated temperatures. The microstructure of the manufactured materials and the grain size distribution affect the compressive strength.

@en

Ultra-thin quantum wells, with their unique charge confinement effects, are essential in enhancing the electronic and optical properties crucial for optoelectronic device optimization. This study focuses on theoretical investigations into radiative recombination lifetimes in nanostructures, specifically addressing both intra-subband (ISB: e-e) and band-to-band (BTB: e-hh) transitions within InGaN/GaN quantum wells (QWs). Our research unveils that the radiative lifetimes in ISB and BTB transitions are significantly influenced by external excitation, particularly in thin-layered QWs with strong confinement effects. In the case of ISB transitions (e-e), the recombination lifetimes span a range from 0.1 to 4.7 ns, indicating relatively longer durations. On the other hand, BTB transitions (e-hh) exhibit quicker lifetimes, falling within the range of 0.01 to 1 ns, indicating comparatively faster recombination processes. However, it is crucial to note that the thickness of the quantum well layer exerts a substantial influence on the radiative lifetime, whereas the presence of impurities has a comparatively minor impact on these recombination lifetimes. This research advances our understanding of transition lifetimes in quantum well systems, promising enhancements across optoelectronic applications, including laser diodes and advanced technologies in detection, sensing, and telecommunications.@en

In this study, we prepared a homogeneous fine powder of barium titanate (BaTiO₃, BT) doped with different concentrations of strontium (x = 0, 0.05, 0.125, 0.15, 0.20, and 0.3) and having the composition Ba_1-xSr_xTiO₃ (barium strontium titanate, BSr_xT). XRD patterns and Rietveld refinement revealed the existence of a single tetragonal phase structure for BSrxT, x = 0–20%, and a single cubic structure for BSr30%T. The physical properties of the pure and doped mixtures were studied. The results showed that the addition of strontium to the physical properties of BaTiO_3, including the apparent porosity, bulk density, linear shrinkage, and water absorption have been changed when increasing the Sr content. Moreover, the inclusion of 15% Sr in BaTiO₃ increases the apparent porosity and water absorption of the sample to 6.2 and 28.5%, respectively. The optical properties were investigated by Ultraviolet–visible spectroscopy and it was found that the optical band gap decreases significantly with increasing Sr concentration, from 3.10 for pure BaTiO₃ to 2.46 eV for the BSr30%T compound. The thermal conductivity measurements showed that the doping mechanism and the increased temperature have a significant effect on the thermal conductivity results of the fabricated ceramic materials. Therefore, it was found that the value of thermal conductivity increases with increasing Sr doping and at higher temperatures. A correlated behavior of optimum values is observed in band gap energy, absorption, and thermal conductivity which can be exploited for thermo-optical applications.

@en

The phenomenon of hot carriers, which are generated through the nonradiative decay of surface plasmons in ultrathin metallic films, offers an intriguing opportunity for subbandgap photodetection even at room temperature. These hot carriers possess sufficient energy to inject into the conduction band of a semiconductor material. The groundbreaking use of iridium (Ir) ultrathin film as an ultraviolet (UV) plasmonic material on silicon (Si) for high-performance photodetectors (PHDs) has been successfully demonstrated. Elevating the thickness of the sputtered Ir film to 4 nm yields a notable surge in photocurrent, registering an impressive 600 μA under 365 nm UV illumination with electron mobility of 1.37E3 cm² V⁻¹ s. This PHD exhibits excellent OFF-ON photoresponses at various applied voltages ranging from 0 to 5 V, maintaining a stable photocurrent. Under UV illumination, it displays exceptional performance, achieving a high detectivity of 1.25E14 Jones and a responsivity of 1.28 A W⁻¹. These outstanding results underscore the significant advantages of increasing the thickness of the Ir film in PHDs, leading to improvements in conductivity, detectivity, external quantum efficiency, responsivity, as well as superior sensitivity for light detection.

@en

This study focused on investigating the optoelectronic properties of molybdenum trioxide (α-MoO₃) thin films using the atomic layer deposition (ALD) technique through different cycle numbers and theoretical investigation. Initial band gap calculations using standard DFT with GGA-PBE resulted in a value of 1.19 eV, which deviated significantly from experimental measurements. The GGA + U method with Hubbard U corrections was applied for the first time to improve the accuracy. This refinement led to a more precise band gap value of 3.09 eV, closely matching previously reported experimental data. The electronic parameters of the α-MoO₃ photodetector, such as ideality factor (n), barrier height (Φ₀), and series resistance (R_s), were analyzed using the thermionic emission theory and confirmed by Cheung and Nord's methods. The results demonstrated that the sample deposited with 100 pulses exhibited higher photodetector performance under UV illumination, despite having a lower R_s.

@en

Self-powered UV sensing has enormous potential in military and civilian applications. However, achieving high responsivity and fast response/recovery time presents significant challenges. Self-powered photodetectors (PDs) have several advantages over traditional PDs, including higher sensitivity, lower power consumption, and simpler design. This study introduces a breakthrough self-powered PD that uses a Schottky junction of 2D α-MoO₃/iridium (Ir)/Si ultrathin film to detect 365 nm light at 0 V bias through using atomic layer deposition (ALD) and sputtering systems. The PD response is enhanced by plasmonic Ir-induced hot carriers, enabling detection in a mere 0.1 ms. Incorporating a 4 nm Ir layer boosts the responsivity from 0 to 34 A W⁻¹, and the external quantum efficiency is elevated from 0 to 7E11 under 365 nm light illumination. It also has a high I_ON/I_OFF ratio of 11.22E4 at 0 V. These results make the MoO₃/4 nm Ir/Si structure an interesting option for self-powered PDs with high efficiency, and the use of a simple ALD system for large-scale fabrication of 2D α-MoO₃ on hot carrier Ir plasmonic layer. The findings of this research hold tremendous promise in the field of UV sensing and can lead to exciting developments in military and civilian technology.

@en

Surface plasmon technology is regarded as having significant potential for the enhancement of the performance of 2D oxide semiconductors, especially in terms of improving the light absorption of 2D MoO3 photodetectors. An ultrathin MoO3/Ir/SiO2/Si heterojunction Schottky self-powered photodetector is introduced here to showcase positive photoconductivity. In wafer-scale production, the initial un-annealed Mo/2 nm Ir/SiO2/Si sample displays a sheet carrier concentration of 5.76 × 1011/cm², which subsequently increases to 6.74 × 1012/cm² after annealing treatment, showing a negative photoconductivity behavior at a 0 V bias voltage. This suggests that annealing enhances the diffusion of Ir into the MoO3 layer, resulting in an increased phonon scattering probability and, consequently, an extension of the negative photoconductivity behavior. This underscores the significance of negative photoconductive devices in the realm of optoelectronic applications.@en

This computational investigation delves into the electronic and optical attributes of InGaN/GaN nanostructures subjected to both harmonic and anharmonic confinement potentials, coupled with the influence of a nonresonant intense laser field (ILF). The theoretical framework incorporates higher-order anharmonic terms, specifically quartic and sextic terms. The solutions to the Schrödinger equation have been computed employing the finite element method and the effective mass theory. Moreover, linear and third-order nonlinear optical absorption coefficients are derived via a density matrix expansion. Our analysis reveals the feasibility of manipulating electronic and optical properties by adjusting confinement potential parameters, system attributes, and laser field intensity. In addition, the ILF induces remarkable modifications, characterized by reduced resonance peak amplitudes and a blue shift in absorption coefficients. Intriguingly, regardless of potential harmonicity, the impact of incident electromagnetic intensity is notably more pronounced in the absence of the ILF. These findings hold significant promise for advancing theoretical predictions, providing valuable insights into the intricate interplay between confinement potentials, laser fields, and their effects on electronic and optical behaviors within nanostructures.

@en

The use of electronic devices that incorporate multilayer ceramic capacitors (MLCCs) is on the rise, requiring materials with good electrical properties and a narrow band gap. This study synthesized yttrium-substituted barium titanate (Ba_1-xY_xTiO₃, BYT) using a sol-gel process at 950 °C with varying concentrations of yttrium (0 ≤ x ≤ 0.3). X-ray diffraction analysis showed that the tetragonal phase became less pronounced as the yttrium content increased. The samples had varying grain sizes and porosity, with the BY30%T sample having the narrowest band gap at 2.21 eV. The BYT ceramic with 30% yttrium had a thermal conductivity of up to 7 W/m K and an electrical conductivity down to 0.002 (Ω cm)⁻¹ at 180 °C. The current-voltage characteristics of the BYT MLCC were also studied, showing potential use in next-generation high-capacity MLCCs. This work presents BYT as a promising material for these types of capacitors.

@en