This study explores the structural, electronic, and optical properties of sandwich-structured thin films composed of WO3, MoWO3, and MoO3 as window layers on VO2/WO3 via a physical vapor deposition method. Morphological analysis demonstrates the evolution of distinct nanowires, offering insights into the lattice strain of the VO2 layer toward high-performance thermochromatic devices. Temperature-dependent sheet resistivity is investigated, showcasing significant improvements in conductivity for samples with MoO3 as a window layer. The electrical and optical properties of the MoO3/VO2/WO3 device showed a phase transition temperature (Tc) of 36.8 °C, a transmittance luminous (Tlum) of 54.57%, and a solar modulation ability (ΔTsol) of 12.43. This comprehensive analysis contributes to understanding the growth of nanowires on multi-layered thin films, offering valuable insights into potential applications in bright windows.@en

Photonic crystal (PhC) has been studied for their potential to improve the efficiency of Cu₂ZnSnS₄ solar cells by increasing the generated photocurrent by integrating it as a back reflector with almost zero transmission through the absorption active zone of the solar cell. It was found that the thickness of PhC layers greatly affects the width of the photonic bandgap and that increasing the thickness of VO₂ causes it to shift to a higher wavelength range. The PhC layers were added at the back side of the solar cell in two different configurations: (Monoclinic (M) VO₂/TiO₂) and (Tetragonal (T) VO₂/TiO₂) via SCAPS model. The study found that the (M VO₂/TiO₂) configuration led to an enhancement of the device's efficiency from 11.02 to 12.79%, while the (T VO₂/TiO₂) reaches 16.88%. The study concluded that the PhC layers enhance the light-matter coupling and photonic coupling and improvement in the device's performance.

@en

Gold (Au) nanoparticles trapped within Cu₂SnS₃ (CTS) thin films were effectively deposited on a low-cost glass substrate using a simple pulsed laser deposition of 15 mJ for 5 ns at a 10 Hz repetition rate. The film's structural, morphological, topography, optical, and optoelectronic properties were investigated. Highly crystalline ternary chalcogenide CTS with tetragonal symmetry and 17 nm grain size is prepared. The 110 Ω resistivity of the thin film increases up to 125 Ω indicating a negative photoresponse under visible light excitation. The decrease in the photocurrent is also observed with Cu₂SnS₃/Au/Cu₂SnS₃ sandwich ternary chalcogenide structure at resistivities values from 31 to 35 Ω and a Joule effect influence the presence of plasmonic Au nanoparticle interlayers involved a lower phonon disorder given a higher photoresponse effect as predicted from Urbach energy.

@en