Because Antarctic surface melt is mostly driven by local processes, its simulation necessitates high-resolution regional climate models (RCMs). However, the current horizontal resolution of RCMs (≈25–30 km) is inadequate for capturing small-scale melt processes. To address this limitation, we present SUPREME (SUPer-REsolution-based Melt Estimation over Antarctica), a deep learning method to downscale surface melt to 5.5 km resolution using a physically-informed super-resolution model. The physical information integrated into the model originates from observations tied to surface melt, specifically remote sensing-derived albedo and elevation. These remote sensing data, in addition to a Regional Atmospheric Climate Model (RACMO) run at 27 km resolution, account for the diverse drivers of surface melt across Antarctica, facilitating effective generalization beyond the training region of the Antarctic Peninsula. A comparison of SUPREME with a dynamically downscaled RACMO run at 5.5 km over the Antarctic Peninsula shows high accuracy, with average yearly RMSE and bias of 5.5 mm w.e. yr⁻¹ and 4.5 mm w.e. yr⁻¹, respectively. Validation at five automatic weather stations reveals SUPREME's marked improvement with substantially lower average RMSE (81 mm w.e.) compared to RACMO 27 km (129 mm w.e.). Beyond the training region, SUPREME aligns more closely with remote sensing products associated with surface melt than super-resolution models lacking physical constraints. While further validation of SUPREME is needed, our study highlights the potential of super-resolution techniques with physical constraints for high-resolution surface melt monitoring in Antarctica, providing insights into the impacts of localized melting on processes affecting ice shelf integrity such as hydrofracturing.

Despite in-situ observations of perennial firn aquifers (PFAs) at specific locations of the Antarctic ice sheet, a comprehensive continent-wide mapping of PFA distribution is currently lacking. We present an estimate of their distribution across Antarctica in the form of a probability assessment using a Monte Carlo technique. Our approach involves a novel methodology that combines observations from Sentinel-1 and Advanced SCATterometer (ASCAT) with output from a regional climate model. To evaluate our method, we conduct an extensive comparison with Operation Ice Bridge observations from the Greenland Ice Sheet. Application to Antarctica reveals high PFA probabilities in the Antarctic Peninsula (AP), particularly along its northern, northwestern, and western coastlines, as well as on the Wilkins, Müller, and George VI ice shelves. Outside the AP, PFA probability is low, except for some locations with marginally higher probabilities, such as on the Abbot, Totten, and Shackleton ice shelves.

Surface melt is an important driver of ice shelf disintegration and its consequent mass loss over the Antarctic Ice Sheet. Monitoring surface melt using satellite remote sensing can enhance our understanding of ice shelf stability. However, the sensors do not measure the actual physical process of surface melt, but rather observe the presence of liquid water. Moreover, the sensor observations are influenced by the sensor characteristics and surface properties. Therefore, large inconsistencies can exist in the derived melt estimates from different sensors. In this study, we apply state-of-the-art melt detection algorithms to four frequently used remote sensing sensors, i.e., two active microwave sensors, which are Advanced Scatterometer (ASCAT) and Sentinel-1, a passive microwave sensor, i.e., Special Sensor Microwave Imager/Sounder (SSMIS), and an optical sensor, i.e., Moderate Resolution Imaging Spectroradiometer (MODIS). We intercompare the melt detection results over the entire Antarctic Ice Sheet and four selected study regions for the melt seasons 2015-2020. Our results show large spatiotemporal differences in detected melt between the sensors, with particular disagreement in blue ice areas, in aquifer regions, and during wintertime surface melt. We discuss that discrepancies between sensors are mainly due to cloud obstruction and polar darkness, frequency-dependent penetration of satellite signals, temporal resolution, and spatial resolution, as well as the applied melt detection methods. Nevertheless, we argue that different sensors can complement each other, enabling improved detection of surface melt over the Antarctic Ice Sheet.

Antarctic blue ice areas are exposed due to erosion and sublimation of snow. At the same time, surface melt can form surface types that are spectrally similar to blue ice, especially at low elevations. These are termed melt-induced blue ice areas. Both types of blue ice are sensitive indicators of climate change. Satellite remote sensing is a powerful technique to retrieve the spatial extent of blue ice areas and their variation in time. Yet, existing satellite-derived blue ice area products are either mono-temporal for the entire Antarctic ice sheet, or multi-temporal for a limited area. Here, we present FABIAN, a product of blue ice fraction over Antarctica, derived from the moderate resolution imaging spectroradiometer (MODIS) archive covering the period 2000–2021. A spectral mixture analysis (SMA) in Google Earth Engine, based on a careful selection of endmember spectra, accurately reconstructs the reflectance observed by MODIS in blue ice areas. Based on a validation with contemporaneous Sentinel-2 images, FABIAN has a root mean square error in blue ice fraction of approximately 10% ∼ 20% in wind-induced blue ice areas, and 20% ∼ 30% in melt-induced blue ice areas across six selected test sites in the coastal East Antarctic ice sheet. FABIAN is challenged in regions with shallow melt streams and lakes, since their spectral profiles are similar to those from blue ice areas in MODIS bands. For further analyses and applications, FABIAN holds the potential for (1) deriving annual blue ice area maps, (2) distinguishing between wind-and melt-induced blue ice types, (3) evaluating and correcting (regional) climate models, and (4) analyzing temporal variations in blue ice abundance and exposure.

Long-term monitoring of global mass transport within the Earth system improves our ability to mitigate natural hazards and better understand their relations to climate change. Satellite gravity is widely used to monitor surface mass variations for its unprecedented spatial and temporal coverage. However, the gravity data contain signals from visco-elastic deformation in response to past ice sheet melting, preventing us from extracting signals of present-day surface mass trend (PDMT) directly. Here we present a global inversion scheme that separates PDMT and visco-elastic glacial isostatic adjustment (GIA) signatures by combining satellite gravimetry with satellite altimetry and ground observations. Our inversion provides global dual data coverage that enables a robust separation of PDMT and GIA spherical harmonic coefficients. It has the advantage of providing estimates of Earth's long wavelength deformation signatures and their uncertainties. Our GIA result, along with its uncertainty estimates, can be used in future GRACE processing to better assess the impact of GIA on surface mass change. Our GIA estimates include a rapid GIA uplift in the Southeast Alaska and the Amundsen Sea Embayment, due to the visco-elastic response to recent glacial unloading. We estimate the average surface mass change rate from 2002–2010 to be −203 ± 3 GT·a⁻¹ in Greenland, −126 ± 18 GT·a⁻¹ in Antarctica and, −62 ± 5 GT·a⁻¹ in Alaska. The GIA low degree spherical harmonic coefficients are sensitive to rheological properties in Earth's deep interior. Our low-degree GIA estimates include geocenter motion and (Formula presented.) which provide unique constraints to understand Earth's lower mantle and ice history.

Accurately estimating the surface melt volume of the Antarctic Ice Sheet is challenging and has hitherto relied on climate modeling or observations from satellite remote sensing. Each of these methods has its limitations, especially in regions with high surface melt. This study aims to demonstrate the potential of improving surface melt simulations with a regional climate model by deploying a deep learning model. A deep-learning-based framework has been developed to correct surface melt from the regional atmospheric climate model version 2.3p2 (RACMO2), using meteorological observations from automatic weather stations (AWSs) and surface albedo from satellite imagery. The framework includes three steps: (1) training a deep multilayer perceptron (MLP) model using AWS observations, (2) correcting Moderate Resolution Imaging Spectroradiometer (MODIS) albedo observations, and (3) using these two to correct the RACMO2 surface melt simulations. Using observations from three AWSs at the Larsen B and C ice shelves, Antarctica, cross-validation shows a high accuracy (root-mean-square error of 0.95ĝ€¯mmĝ€¯w.e.ĝ€¯d-1, mean absolute error of 0.42ĝ€¯mmĝ€¯w.e.ĝ€¯d-1, and a coefficient of determination of 0.95). Moreover, the deep MLP model outperforms conventional machine learning models and a shallow MLP model. When applying the trained deep MLP model over the entire Larsen Ice Shelf, the resulting corrected RACMO2 surface melt shows a better correlation with the AWS observations for two out of three AWSs. However, for one location (AWS 18), the deep MLP model does not show improved agreement with AWS observations; this is likely because surface melt is largely driven by factors (e.g., air temperature, topography, katabatic wind) other than albedo within the corresponding coarse-resolution model pixels. Our study demonstrates the opportunity to improve surface melt simulations using deep learning combined with satellite albedo observations. However, more work is required to refine the method, especially for complicated and heterogeneous terrains.

Satellite gravimetry and altimetry measurements record gravity and elevation changes, respectively, which are useful for determining mass and volume change of the Antarctic Ice Sheet. Common methods employ products from regional climate modeling and firn modeling to aid interpretation and to link volume changes to mass changes. Estimating deterministic parameters over defined time periods is a conventional way to evaluate those changes. To overcome limitations of deterministic analyses with respect to time-variable signals, we have developed a state-space model framework. Therein, we jointly evaluate four mass and volume data sets by coupling of temporal signal variations. We identify long-term signals of ice drainage basins that are observed by the satellite gravimetry mission GRACE and several satellite altimetry missions from April 2002 until August 2016. The degree to which we can separate long-term and short-term variations strongly depends on the similarity of the mass and volume change time series. For the drainage system of the Pine Island Glacier (West Antarctica), our results show noticeable variations of the long-term trend with an acceleration of the contribution of ice dynamics to the mass balance from −11 ± 8 to −58 ± 8 Gt a⁻¹. Our results in Dronning Maud Land (East Antarctica) show a positive long-term contribution to the mass balance at almost a constant rate. The presented approach can fit time-variable changes without artificial selection of periods of interest. Furthermore, because we only enforce common long-term time variations between mass and volume data, differences in mean trend rates help to uncover model discrepancies.

We evaluate modelled Greenland ice sheet (GrIS) near-surface climate, surface energy balance (SEB) and surface mass balance (SMB) from the updated regional climate model RACMO2 (1958-2016). The new model version, referred to as RACMO2.3p2, incorporates updated glacier outlines, topography and ice albedo fields. Parameters in the cloud scheme governing the conversion of cloud condensate into precipitation have been tuned to correct inland snowfall underestimation: snow properties are modified to reduce drifting snow and melt production in the ice sheet percolation zone. The ice albedo prescribed in the updated model is lower at the ice sheet margins, increasing ice melt locally. RACMO2.3p2 shows good agreement compared to in situ meteorological data and point SEB/SMB measurements, and better resolves the spatial patterns and temporal variability of SMB compared with the previous model version, notably in the north-east, south-east and along the K-transect in south-western Greenland. This new model version provides updated, high-resolution gridded fields of the GrIS present-day climate and SMB, and will be used for projections of the GrIS climate and SMB in response to a future climate scenario in a forthcoming study.