A submerged, low-relief nearshore berm was constructed in the Pacific Ocean near the mouth of the Columbia River, USA, using 216,000 m³ of sediment dredged from the adjacent navigation channel. The material dredged from the navigation channel was placed on the northern flank of the ebb-tidal delta in water depths between 12 and 15 m and created a distinct feature that could be tracked over time. Field measurements and numerical modeling were used to evaluate the transport pathways, time scales, and physical processes responsible for dispersal of the berm and evaluate the suitability of the location for operational placement of dredged material to enhance the sediment supply to eroding beaches onshore of the placement site. Repeated multibeam bathymetric surveys characterized the initial berm morphology and dispersion of the berm between September 22, 2020, and March 10, 2021. During this time, the volume of sediment within the berm decreased by about 40%to 127,000 m³, the maximum height decreased by almost 60%, and the center of the deposit shifted onshore over 200 m. Observations of berm morphology were compared with predictions from a three-dimensional hydrodynamic and sediment transport model application to refine poorly constrained model input parameters including sediment transport coefficients, bed schematization, and grain size. The calibrated sediment transport model was used to predict the amount, timing, and direction of transport outside of the observed survey area. Model simulations predicted that tidal currents were weak in the vicinity of the berm and wave processes including enhanced bottom stresses and asymmetric bottom orbital velocities resulted in dominant onshore movement of sediment from the berm toward the coastline. Roughly 50% of the berm volume was predicted to disperse away from the initial placement site during the 169 day hindcast. Between 9 and 17% of the initial volume of the berm was predicted to accumulate along the shoreface of a shoreline reach experiencing chronic erosion directly onshore of the placement site. Scenarios exploring alternate placement locations suggested that the berm was relatively effective in enhancing the sediment supply along the eroding coastline north of the inlet. The transferable monitoring and modeling framework developed in this study can be used to inform implementation of strategic nearshore placements and regional sediment management in complex, high-energy coastal environments elsewhere.

@en

The effects of climate change and sea level rise, combined with overpopulation are leading to ever-increasing stress on coastal regions throughout the world. As a result, there is increased interest in sustainable and adaptable methods of coastal protection. Dynamic cobble berm revetments consist of a gravel berm installed close to the high tide shoreline on a sand beach and are designed to mimic naturally occurring composite beaches (dissipative sandy beaches with a gravel berm around the high tide shoreline). Existing approaches to predict wave runup on sand or pure gravel beaches have very poor skill for composite beaches and this restricts the ability of coastal engineers to assess flood risks at existing sites or design new protection structures. This paper presents high-resolution measurements of wave runup from five field and large-scale laboratory experiments investigating composite beaches and dynamic cobble berm revetments. These data demonstrated that as the swash zone transitions from the fronting sand beach to the gravel berm, the short-wave component of significant swash height rapidly increases and can dominate over the infragravity component. When the berm toe is submerged at high tide, it was found that wave runup is strongly controlled by the water depth at the toe of the gravel berm. This is due to the decoupling of the significant wave height at the berm toe from the offshore wave conditions due to the dissipative nature of the fronting sand beach. This insight, combined with new methods to predict wave setup and infragravity wave dissipation on composite beaches is used to develop the first composite beach/dynamic revetment-specific methodologies for predicting wave runup.@en

Ocean-basin-scale climate variability produces shifts in wave climates and water levels affecting the coastlines of the basin. Here we present a hybrid shoreline change—foredune erosion model (A COupled CrOss-shOre, loNg-shorE, and foreDune evolution model, COCOONED) intended to inform coastal planning and adaptation. COCOONED accounts for coupled longshore and cross-shore processes at different timescales, including sequencing and clustering of storm events, seasonal, interannual, and decadal oscillations by incorporating the effects of integrated varying wave action and water levels for coastal hazard assessment. COCOONED is able to adapt shoreline change rates in response to interactions between longshore transport, cross-shore transport, water level variations, and foredune erosion. COCOONED allows for the spatial and temporal extension of survey data using global data sets of waves and water levels for assessing the behavior of the shoreline at multiple time and spatial scales. As a case study, we train the model in the period 2004–2014 (11 years) with seasonal topographic beach profile surveys from the North Beach Sub-cell (NBSC) of the Columbia River Littoral Cell (Washington, USA). We explore the shoreline response and foredune erosion along 40 km of beach at several timescales during the period 1979–2014 (35 years), revealing an accretional trend producing reorientation of the beach, cross-shore accretional, and erosional periods through time (breathing) and alternating beach rotations that are correlated with climate indices.

@en

Coastal foredune growth is typically associated with aeolian sediment transport processes, while foredune erosion is associated with destructive marine processes. New data sets collected at a high energy, dissipative beach suggest that total water levels in the collision regime can cause dunes to accrete-requiring a paradigm shift away from considering collisional wave impacts as unconditionally erosional. From morphologic change data sets, it is estimated that marine processes explain between 9% and 38% of annual dune growth with aeolian processes accounting for the remaining 62% to 91%. The largest wind-driven dune growth occurs during the winter, in response to high wind velocities, but out of phase with summertime beach growth via intertidal sandbar welding. The lack of synchronization between maximum beach sediment supply and wind-driven dune growth indicates that aeolian transport at this site is primarily transport, rather than supply, limited, likely due to a lack of fetch limitations.

@en