In the context of a comprehensive campaign for the characterisation of transmutation fuels for next generation nuclear reactors, the melting behaviour of mixed uranium-americium dioxides has been experimentally studied for the first time by laser heating, for Am concentrations up to 70 mol. % under different types of atmospheres. Extensive post-melting material characterisations were then performed by X-ray absorption spectroscopy and electron microscopy. The melting temperatures observed for the various compositions follow a markedly different trend depending on the experimental atmosphere. Uranium-rich samples melt at temperatures significantly lower (around 2700 K) when they are laser-heated in a strongly oxidizing atmosphere compressed air at (0.300 ± 0.005) MPa, compared to the melting points (beyond 3000 K) registered for the same compositions in an inert environment (pressurised Ar). This behaviour has been interpreted on the basis of the strong oxidation of such samples in air, leading to lower-melting temperatures. Thus, the melting temperature trend observed in air is characterized, in the purely pseudo-binary dioxide plane, by an apparent maximum melting temperature around 2850 K for 0.3 < x(AmO₂) < 0.5. The melting points measured under inert atmosphere uniformly decrease with increasing americium content, displaying an approximately ideal solution behaviour if a melting point around 2386 K is assumed for pure AmO₂. In reality, it will be shown that the (U, Am)-oxide system can only be rigorously described in the ternary U-Am-O phase diagram, rather than the UO₂-AmO₂ pseudo-binary, due to the aforementioned over-oxidation effect in air. Indeed, general departures from the oxygen stoichiometry (Oxygen/Metal ratios ≠ 2.0) have been highlighted by the X-ray Absorption Spectroscopy (XAS). Finally, to help interpret the experimental results, thermodynamic computations based on the CALPHAD method will be presented.

The enthalpy increment data for the (Th,U)O₂ and (U,Pu)O₂ solid solutions are reviewed and complemented with new experimental data (400–1773 K) and many-body potential model simulations. The results of the review show that from room temperature up to about 2000 K the enthalpy data are in agreement with the additivity rule (Neumann-Kopp) in the whole composition range. Above 2000 K the effect of Oxygen Frenkel Pair (OFP) formation leads to an excess enthalpy (heat capacity) that is modeled using the enthalpy and entropy of OFP formation from the end-members. A good agreement with existing experimental work is observed, and a reasonable agreement with the results of the many-body potential model, which indicate the presence of the diffuse Bredig (superionic) transition that is not found in the experimental enthalpy increment data.

A thermodynamic model for the Na-O system was developed for the first time using the CALPHAD method after review of the structural, thermodynamic, and phase diagram data available on this system. Differential Scanning Calorimetry measurements were moreover performed to assess the phase equilibria and liquidus temperature in the Na₂O-Na₂O₂ composition range. A CALPHAD model for the Na-U-O system was furthermore developed on the basis of both reviewed experimental data, and thermodynamic functions of the sodium uranates derived by combining ab initio calculations and a quasi-harmonic statistical model. The phase equilibria in this ternary system are particularly relevant for the safety assessment of the nuclear fuel-sodium coolant interaction in Sodium-cooled Fast reactors (SFRs). The model predicts the stability of the ternary phase field UO₂-Na₃UO₄-Na₄UO₅, which is consistent with the most recent literature data. Further optimization was moreover performed to fit the sodium partial pressures measured experimentally in the NaUO₃-Na₂U₂O₇-UO₂ and NaUO₃-Na₂UO₄-Na₂U₂O₇ phase fields, yielding an overall consistent description. Finally, the oxygen content required to form pentavalent Na₃UO₄ and hexavalent Na₄UO₅ in liquid sodium at 900 K were calculated to be 0.7 and 1.5 wppm, respectively, which are levels typically encountered in SFRs.