Some example applications are presented, in which the peculiar Raman fingerprint of PuO₂ can be used for the detection of crystalline Pu⁴⁺ with cubic symmetry in an oxide environment in various host materials, like mixed oxide fuels, inert matrices and corium sub-systems. The PuO₂ Raman fingerprint was previously observed to consist of one main T_2g vibrational mode at 478 cm⁻¹ and two crystal electric field transition lines at 2130 cm⁻¹ and 2610 cm⁻¹. This particular use of Raman spectroscopy is promising for applications in nuclear waste management, safety and safeguard.

In this study we present a comprehensive thermodynamic description of the binary CsF-ThF₄ system. The phase equilibria of several intermediate compositions in this system have been determined using the DSC technique combined with a post-analysis using powder X-ray diffraction. Considering all the novel experimental data, a thermodynamic model for the CsF-ThF₄ system has been developed for the first time using the Calphad approach. The present model reproduces very well the measurements performed. Knudsen effusion mass spectrometry (KEMS) has further been used to investigate the vapour pressure over the molten CsF-ThF₄ salt and to determine the thermodynamic activities of CsF and ThF₄ in the liquid solution. As part of this study, the vaporization of pure CsF was examined and the results were compared with the literature showing a good agreement. Next, the vapour pressure of CsF-ThF₄ in the liquid solution was investigated by measuring three samples with compositions X ThF₄ = (0.4, 0.6, 0.8) mol/mol. A strong negative deviation from Raoult's law was observed for both species, more evident in case of CsF, and a good agreement with the predictions of our thermodynamic model was found. This article is a pre-requisite for the assessment of the ternary LiF-CsF-ThF₄ system.

During rapid high-temperature events, like a terrorist attack with radiological dispersal device, radiological material will be released into the environment. In these scenarios, the ratio between parent and daughter nuclides can be used for nuclear forensic investigations to determine the age of the used radioactive source. We have used fast laser heating to produce aerosols of a material often found in radioisotope thermoelectric generators. To investigate the behaviour of SrTiO₃, we have recreated pure and mixed samples, mimicking several parent-to-daughter ratios. By combining scanning electron microscopy and energy-dispersive X-ray spectroscopy analysis with Raman spectroscopy, we were able to distinguish different elements and phases present in the aerosols. Two types of aerosols have been identified: individual aerosols from a few micrometre to a few tens of micrometre and agglomerates of smaller aerosols from a few hundred nanometre to a few micrometre. The bigger aerosols, formed from mechanically expelled liquefied material, showed a parent-to-daughter ratio that stays close to the value that would be anticipated by the initial composition of the material, but in the agglomerates, formed from vaporised material, the presence of the daughter elements reduces significantly due to differences in the condensation behaviour.