The increasidng demand for implants due to the aging populations highlights the necessity for applying highly functional coatings on the surface of implants. This study investigates the implications of applying a chitosan/polylysine composite coating on anodized titanium surfaces, aiming for improved biocompatibility, bioactivity, and anti-bacterial properties. Titanium substrates were anodized at 40 volts for a duration of two hours, followed by dip coating with the chitosan/polylysine composite. Fourier-transform infrared (FTIR) analysis was employed to characterize the polymer structure, while field emission scanning electron microscopy (FESEM) and energy-dispersive X-ray spectroscopy (EDS) techniques were utilized to evaluate nanotube morphology and the coating structure. Results showed that samples containing 1.5% polylysine exhibited noticeable anti-bacterial properties and cell viability above fifty percent. Subsequent immersion in simulated body fluid (SBF) for a duration of two weeks revealed the formation of apatite crystals on the coated samples, indicating that the samples are bioactive. Furthermore, polylysine contributed to enhanced resistance against degradation in phosphate-buffered saline (PBS) solution. Overall, the chitosan/polylysine composite coating exhibited promising mechanical and biomedical characteristics, suggesting its potential for applications in orthopedic implants.@en

Modification of paint with nanoparticles (NPs) provides self-cleaning, water/dirt-repellent, and other properties. Therefore, the aim of the present study was to biosynthesize silver (Ag) and copper oxide (CuO) NPs and to prepare NP-modified paint. To this end, AgNPs and CuONPs were biosynthesized using Bacillus atrophaeus spores and commercial and crude dipicolinic acid (DPA) extracted from the spore of this bacterium. The synthesized NPs were characterized using electron microscopy, Fourier-transform infrared (FTIR), X-ray diffraction analysis (XRD), and energy-dispersive X-ray spectroscopy (EDS) methods. A minimum inhibitory concentration (MIC) assay of NPs against Escherichia coli ATCC8739 and Staphylococcus aureus ATCC6538 was carried out. The antibacterial effects of prepared NP–paint complexes were assessed using an optical density (OD) comparison before and after adding metal sheets coated with NP–paint complexes into the nutrient broth medium. Four different types of NPs were synthesized in this research: AgNPs synthesized by spore (A), AgNPs synthesized by commercial DPA (B), AgNPs synthesized by crude DPA (C), and CuONPs synthesized by spore (D). SEM analysis confirmed the spherical shape of NPs. According to the results, NPs A, B, and D showed higher antibacterial activity against S. aureus compared to E. coli. Furthermore, the analysis of the antibacterial effects of NP–paint complexes suggested that paint–NPs A, B, and C displayed higher activity on E. coli compared to S. aureus. Moreover, the antibacterial effect of paint–NP D was significantly lower than other NPs. According to this robust antibacterial effect on pathogenic bacteria, it seems that these NP–paint complexes could be useful in public places such as hospitals, airports, dormitories, schools, and office buildings, where the rate of transmission of infection is high.@en

Adhesive bonding is a key joining technology in many industrial applications, including automotive, aerospace industries, biomedical devices, and microelectronic components. Adhesive bonding is gaining more and more attention due to the increasing demand for joining similar or dissimilar components, mostly within the framework of designing lightweight structures. Silicone sealant is widely used in engineering application due to its thermal stability, excellent energy absorption, and good damping characteristics. In those applications, sealant usually exposed to various environment stress, such as, high temperature, mechanical stress, humidity, light radiation, and chemical attack. Long-term stability and durability of sealant is crucial to the performance of the associated application. The main degrading factors for silicone in microelectronic applications are temperature, humidity, alkali, and mechanical loading. The focus in the present paper is to understand different failure mechanisms in silicone sealants and adhesives and to study how different environmental, mechanical, and service-related stresses attribute to the kinetics and extent of degradation in silicone sealants and adhesives. The impact of different failure mechanisms on the lifetime and reliability of microelectronic devices will be methodically investigated.@en

This study presents a failure analysis in two reformer tubes used for hydrogen production in a petrochemical industry. These tubes (Tube A and Tube B) were made by the centrifugal casting of HP-Nb alloy in such a way that one contained titanium as a micro-element, and the other was free from titanium in its chemical composition. Although the two tubes were subjected to similar creep conditions, Tube A failed after only 46,000 h of operation against the design life of 100,000 h. SEM images showed initiation and growth of creep pores next to chromium carbide particles, as well as the formation of microcracks in Cr23C6 carbides. Pore initiation occurs as a result of grain boundary sliding and is strongly dependent on structural morphology. The tube containing titanium (Tube B) showed higher thermal stability and higher creep resistance than the tube without titanium (Tube A), which was due to the formation of finer and more discrete carbide particles. The final fracture of the tube without titanium (Tube A) occurred due to the coalescence of creep pores and the creation of grain boundary cracks.@en

In this chapter, degradation mechanisms of optical materials, used in the light-emitting diode (LED)-based products, are explained. This chapter aims at describing the service conditions on the degradation mechanisms of different organic optical materials in LEDs which lead to the color shift of the light output. The contributions of different degradation mechanisms of optical and package materials in LED-based products to color shift are thoroughly explained.@en

This paper investigates the synthesis, antibacterial, and photocatalytic properties of silver ion-exchanged natural zeolite/TiO2 photocatalyst nanocomposite. Zeolite is known to have a porous surface structure, making it an ideal substrate and framework in different nanocomposites. Moreover, natural zeolite has a superior thermal and chemical stability, with hardly any reactivity with chemicals. Finding an effective and low-cost method to remove both antibiotics and bacteria from water resources has become a vital global issue due to the worldwide excessive use of chemicals and antibiotics. This research aims to propose a facile method to synthesize Ag-ion-exchanged zeolite/TiO2 catalyst for anti-bacterial purposes and photocatalytic removal of atibiotics from wastewaters. TiO2 particles were deposited on the surface of natural zeolite. Ag ion exchanging was performed via a liquid ion-exchange method using 0.1 M AgNO3 solution. X-ray diffractometry (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and Fourier-transform infrared spectroscopy (FTIR) were used to evaluate the structure of synthesized powders. Antibacterial activities of samples were assessed, using Staphylococcus aureus ATCC 25923 and Escherichia coli ATCC 25922 by disc diffusion method. It was shown that Ag-containing nanocomposite samples have an improved antibacterial performance in both cases. Results showed that the synthesized catalyst has promising potentials in wastewater treatment.@en

In the foregoing chapters, the reliability of organic compounds in microelectronics and optoelectronics was discussed. It provided a state of the art in reliability concepts for materials used in electronic products. It also enlightened the direction in reliability concepts for these products. In this chapter, we discuss the outlook where we envision that physics of failure will be replaced by physics of degradation. New technologies, like health monitoring and digital twins, are needed to make this foreseen shift in reliability concepts.@en

This paper investigates the synthesis and characterization of photoactive TiO₂/CuO nanocomposites for the simultaneous antibacterial applications and photocatalytic removal of Amoxicilline from wastewaters. Effective removal of biological and organic contaminants from water resources has become a global challenge due to contaminants' complexity and extensive use. TiO₂/CuO heterojunctions with different CuO loadings were synthesized using a straightforward precipitation method. Electron microscopy, energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), Fourier transformed infrared (FTIR), ultraviolet–visible (UV-VIS) analyses were used to characterize synthesized samples. Antibacterial activities of samples were investigated against Staphylococcus aureus. Also, the applicability of synthesized powders in the photocatalytic removal of Amoxicilline from wastewater was methodically investigated. Results showed that the photocatalytic activity of synthesized TiO₂/CuO nanocomposites is highly dependent on the CuO loadings of samples. CuO loading can also increase the light absorption within the visible light region, making TiO₂/CuO samples applicable in the visible light region. Results also showed that CuO loading greatly enhances the antibacterial characteristics of samples.

@en

This paper investigates the photocatalytic characteristics of Ag nanowire (AgNW)/TiO2 and AgNW/TiO2/graphene oxide (GO) nanocomposites. Samples were synthesized by the direct coating of TiO2 particles on the surface of silver nanowires. As-prepared AgNW/TiO2 and AgNW/TiO2/GO nanocomposites were characterized by electron microscopy, X-ray diffraction, UV/visible absorption spectroscopy, and infrared spectroscopy. Transmission electron microscope (TEM) images confirmed the successful deposition of TiO2 nanoparticles on the surface of AgNWs. The photocatalytic activity of synthesized nanocomposites was evaluated using Rhodamine B (RhB) in an aqueous solution as the model organic dye. Results showed that synthesized AgNW/TiO2/GO nanocomposite has superior photocatalytic activities when it comes to the decomposition of RhB.

@en

In this paper, degradation mechanisms of optical materials, used in the light emitting diode (LED)-based products, are reviewed. The LED lighting is one of the fastest technology shifts in human history. Lighting accounts for almost 20% of the global electrical energy use, inferring that replacement of traditional lighting sources with LEDs with higher efficiencies will have major positive implications for the global energy consumption. Organic optical materials are key components in LEDs in the sense that they control the functionality of the device and they have decisive effects on the durability and reliability of LEDs. This paper aims at describing the influences of chemical structure and service conditions on the degradation mechanisms of organic optical materials in LEDs which lead to the lumen depreciation, discolouration, and colour shift of the LED light output. The contributions of different degradation mechanisms of optical and package materials in LED-based products to the lumen depreciation and colour shift are methodically reviewed.

@en

This paper aims to investigate the synthesis, structure, and optical properties of SiO2 @YAG:Ce core–shell optical nanoparticles for solid state lighting applications. YAG:Ce phosphor is a key part in white light emitting diodes (LEDs), with its main functionality being the generation of yellow light. Generated yellow light from phosphor will be combined with blue light, emitted from chip, resulting in the generation of white light. Generated light in LEDs will often be scattered by SiO2 nanoparticles. SiO2 nanoparticles are often distributed within the optical window, aiming for a more homogeneous light output. The main idea in this research is to combine these functionalities in one core–shell particle, with its core being SiO2 and its shell being phosphor. In this study core–shell nanoparticles with different Ce3+ concentrations were synthesized by a sol–gel method. Synthesized nanoparticles were characterized by X-ray diffraction (XRD), small angle X-ray scattering (SAXS) analysis, high resolution transmission electron macroscopy (HRTEM), Fourier transform infrared (FTIR), and photoluminescence spectroscopy. Luminescence characteristics of SiO2 @YAG:Ce core–shell particles were compared with that of SiO2 /YAG:Ce mixture composite, which is now used in commercial LEDs. Obtained results showed that core–shell nanoparticles have comparatively much better optical properties, compared to SiO2 /YAG:Ce mixture composite and can therefore be potentially used in LEDs.@en

This paper investigates the root cause of the formation of surface cracks on hot-rolled C-Mn constructional steel heavy plates. Cracks are rather evenly distributed over the surface in the form of colonies of cracks. Samples were cut from the heavy plate. The microstructure of samples in the as-cast and hot-rolled states were studied using optical and electron microscopes as well as energy dispersive X-ray spectroscopy (EDS). Results show that cracks are heavily oxidized. De-carburized areas are also seen alongside cracks. The crack tip is in the form of a deer-horn, indicating that crack branching has taken place during deformation. The crack initiation sites are V-shaped grooves on the surface of as-cast slabs. Correlations between microstructures, processing parameters, and crack formation are discussed.

@en

This paper investigates degradation and failure mechanisms of BPA-PC lenses in simulated harsh environment conditions. Exposure of secondary optics in Light Emitting Diode LED-based systems or any other similar applications to environmental stresses can adversely effect the performance and lifetime of products. This paper simulates a harsh environment condition, using a salt bath oven. Salt spray exposure/ageing tests at 45° C were carried out up to four months. Fourier transform infrared-attenuated total reflection FTIR-ATR spectrometer and Lambda 950 Ultraviolet-Visible (UV-VIS) spectrophotometer were used to study the optical and chemical characteristics of aged plates. Results showed that salt bath exposure test resulted in the severe deterioration of optical characteristics BPA-PC samples. Degradation of optical properties of BPA-PC plates is attributable to the oxidation of samples.

@en

This paper investigates the failure of superheater tubes, made of AISI 304 stainless steel, after 10 years of service in a power plant. The failure is in the form of fish mouth rupture and is mostly observed at U-bent elbows. Microstructure of the degraded samples was analyzed using optical and scanning electron microscopes. Phases were identified with energy-dispersive x-ray spectroscopy analysis as well. Results show that grain boundaries are heavily oxidized, and this has resulted in the embrittlement of the alloy. The fractography analysis showed that cracks propagated along grain boundaries, resulting in an intercrystalline fracture mode. At the end, some tentative remedial measures are recommended to mitigate similar failure in power plants.

@en

Isothermal ageing of Al–Mg–Si alloys, stored at room temperature for more than 5 months, is associated with an unexpected significant increase in the overall electrical resistivity. This unexpected anomalous increase is not observed in alloys with shorter storage (natural ageing) times. This phenomenon is explained with a scenario, based on the evolution of the size distribution of Guinier–Preston (GP) zones during natural ageing and during subsequent artificial ageing. The proposed scenario can explain the contribution of natural ageing atomic clusters to this anomalous increase in the electrical resistivity. A physically based combined precipitation–electrical resistivity model, with the former being based on simultaneous nucleation-growth-coarsening reactions and the latter based on the Bragg scattering of electrons from atomic clusters, has been used to explain the electrical resistivity evolution. It is shown that the proposed model is capable of reproducing the experimental data in both short natural ageing (less than 5 months) and long natural ageing (more than 5 months) regimes.

@en

This paper investigates the effects of carbon nanotubes (CNT) addition on the structure and mechanical properties of Ni ₃ Al-xB (0.0 < x < 1.5 at%) intermetallic compound. Ni ₃ Al-xB-1wt%CNT nanocomposite powders were first synthesized by mechanical alloying. Effects of CNT addition on the lattice strain and crystallite size of synthesized powders were investigated by means of X-ray diffraction (XRD) analysis. Scanning electron microscope (SEM) was used to study powder morphologies. Powders, synthesized by mechanical alloying, were then consolidated using spark plasma sintering (SPS), conducted at 950 °C under pressure 50 MPa. Microhardness and shear punch tests were employed to study the mechanical properties of sintered samples. Results show that CNT addition is accompanied by a decrease in crystallite size and a significant improvement of mechanical properties of Ni ₃ Al-xB (0.0 < x < 1.5 at%) intermetallic compounds.

@en

This paper aims at studying microstructure and mechanical properties of spark plasma sintered (SPSed) Stellite®-6 cobalt-based superalloy. SPS is a sintering technique, based on a relatively fast resistance heating using a pulsed current. Fast sintering process, associated with minimum grain growth, results in excellent mechanical properties. Samples were sintered at temperatures ranging from 950 to 1100 °C. Microstructure of samples were studied using scanning electron microscope (SEM), energy-dispersive X-ray spectroscope (EDS), X-Ray diffraction (XRD), and optical microscope. Hardness, impact test, as well as room and high temperature compression tests were used to evaluate the effects of sintering temperature and duration on the mechanical properties of SPSed samples. Results show that optimum mechanical properties can be obtained after sintering at 1050 °C for 10 min. The correlation between sintering parameters, microstructure, and mechanical properties are discussed.

@en

This work investigates the effects of grain boundary oxidation on the failure of AISI 304H stainless steel elbows in a heat exchanger in a power plant after 8 years of service at 400 °C. Optical and electron microscopes, elemental mapping, electron dispersive spectroscopy (EDS), inductively-coupled plasma atomic energy spectroscopy (ICP-AES) and hardness tester were used to understand the failure mechanism. Elemental mapping of the samples operating for 8 years showed high concentrations of oxygen and carbon at the grain boundaries. Results showed that cracks were propagated along the grain boundaries due to the brittleness of the oxide layer at the boundaries. Results confirmed the intergranular and brittle nature of the fracture. Microhardness profilometry showed that oxidized/carburized grain boundaries are significantly harder than matrix inside grains.@en