Clouds affected by solar eclipses could influence the reflection of sunlight back into space and might change local precipitation patterns. Satellite cloud retrievals have so far not taken into account the lunar shadow, hindering a reliable spaceborne assessment of the eclipse-induced cloud evolution. Here we use satellite cloud measurements during three solar eclipses between 2005 and 2016 that have been corrected for the partial lunar shadow together with large-eddy simulations to analyze the eclipse-induced cloud evolution. Our corrected data reveal that, over cooling land surfaces, shallow cumulus clouds start to disappear at very small solar obscurations (~15%). Our simulations explain that the cloud response was delayed and was initiated at even smaller solar obscurations. We demonstrate that neglecting the disappearance of clouds during a solar eclipse could lead to a considerable overestimation of the eclipse-related reduction of net incoming solar radiation. These findings should spur cloud model simulations of the direct consequences of sunlight-intercepting geoengineering proposals, for which our results serve as a unique benchmark.

@en

Condensation in cumulus clouds plays a key role in structuring the mean, nonprecipitating trade wind boundary layer. Here, we summarize how this role also explains the spontaneous growth of mesoscale [.O(10) km] fluctuations in clouds and moisture around the mean state in a minimal-physics, large-eddy simulation of the undisturbed period during BOMEX on a large [O(100) km] domain. Small, spatial anomalies in condensation in cumulus clouds, which form on top of small moisture fluctuations, power circulations that transport moisture, but not heat, from dry to moist regions, and thus reinforce the condensation anomaly. We frame this positive feedback as a linear instability in mesoscale moisture fluctuations, whose time scale depends only on (i) a vertical velocity scale and (ii) the mean environment's vertical structure. In our minimal-physics setting, we show both ingredients are provided by the shallow cumulus convection itself: it is intrinsically unstable to length scale growth. The upshot is that energy released by clouds at kilometer scales may play a more profound and direct role in shaping the mesoscale trade wind environment than is generally appreciated, motivating further research into the mechanism's relevance.

@en

Numerical simulations of the tropical mesoscales often exhibit a self-reinforcing feedback between cumulus convection and shallow circulations, which leads to the self-aggregation of clouds into large clusters. We investigate whether this basic feedback can be adequately captured by large-eddy simulations (LESs). To do so, we simulate the non-precipitating, cumulus-topped boundary layer of the canonical “BOMEX” case over a range of numerical settings in two models. Since the energetic convective scales underpinning the self-aggregation are only slightly larger than typical LES grid spacings, aggregation timescales do not converge even at rather high resolutions (<100 m). Therefore, high resolutions or improved sub-filter scale models may be required to faithfully represent certain forms of trade-wind mesoscale cloud patterns and self-aggregating deep convection in large-eddy and cloud-resolving models, and to understand their significance relative to other processes that organize the tropical mesoscales.

@en

A new generation of operational atmospheric models operating at horizontal resolutions in the range 200 m up to ~ 2 km is becoming increasingly popular for operational use in numerical weather prediction and climate applications. Such grid spacings are becoming sufficiently fine to resolve a fraction of the turbulent transports. Here we analyze LES results of a convective boundary layer obtained by coarsening horizontal grid spacings up to 800 m. The aim is to explore the dependency of the mean state and turbulent fluxes on the grid resolution. Both isotropic and anisotropic eddy diffusion approaches are evaluated, where in the latter case the horizontal and vertical eddy diffusivities differ in accord with their horizontal and vertical grid spacings. For coarsening horizontal grid sizes entrainment at the top of the boundary layer tends to get slightly enhanced for isotropic diffusion. An analysis of the energy spectrum shows that anisotropic diffusion causes relatively more dissipation of variance at smaller length scales. This leads, in turn, to a shift of spectral energy towards larger length scales. This can also be clearly seen from the different kinds of spatial organization. The present study therefore suggests that details with regards to the representation of processes at small scales might impact the organization at length scales much larger than the smallest scales that can be resolved by the model.@en

A new generation of operational atmospheric models operating at horizontal resolutions in the range 200 m ∼ 2 km is becoming increasingly popular for operational use in numerical weather prediction and climate applications. Such grid spacings are becoming sufficiently fine to resolve a fraction of the turbulent transports. Here we analyze Large-eddy simulation results of a convective boundary layer obtained by coarsening horizontal grid spacings up to 800 m. The aim is to explore the dependency of the mean state and turbulent fluxes on the grid resolution. Both isotropic and anisotropic eddy diffusion approaches are evaluated, where in the latter case the horizontal and vertical eddy diffusivities differ in accord with their horizontal and vertical grid spacings. For coarsening horizontal grid sizes entrainment at the top of the boundary layer tends to get slightly enhanced for isotropic diffusion, whereas for the anisotropic diffusion approach the vertically well-mixed boundary-layer structure becomes severely degraded. An analysis of the energy spectrum shows that anisotropic diffusion causes relatively more dissipation of variance at smaller length scales. This leads, in turn, to a shift of spectral energy toward larger length scales that also becomes apparent from a rather different kind of spatial organization of convection. The present study therefore suggests that details with regards to the representation of processes at small scales might impact the organization at length scales much larger than the smallest scales that can be resolved by the model.@en

The parameterised description of subgrid-scale processes in the clear and cloudy boundary layer has a strong impact on the performance skill in any numerical weather prediction (NWP) or climate model and is still a prime source of uncertainty. Yet, improvement of this parameterised description is hard because operational models are highly optimised and contain numerous compensating errors. Therefore, improvement of a single parameterised aspect of the boundary layer often results in an overall deterioration of the model as a whole. In this paper, we will describe a comprehensive integral revision of three parameterisation schemes in the High Resolution Local Area Modelling - Aire Limitée Adaptation dynamique Développement InterNational (HIRLAM-ALADIN) Research on Mesoscale Operational NWP In Europe - Applications of Research to Operations at Mesoscale (HARMONIE-AROME) model that together parameterise the boundary layer processes: the cloud scheme, the turbulence scheme, and the shallow cumulus convection scheme. One of the major motivations for this revision is the poor representation of low clouds in the current model cycle. The newly revised parametric descriptions provide an improved prediction not only of low clouds but also of precipitation. Both improvements can be related to a stronger accumulation of moisture under the atmospheric inversion. The three improved parameterisation schemes are included in a recent update of the HARMONIE-AROME configuration, but its description and the insights in the underlying physical processes are of more general interest as the schemes are based on commonly applied frameworks. Moreover, this work offers an interesting look behind the scenes of how parameterisation development requires an integral approach and a delicate balance between physical realism and pragmatism.

@en

The dispersion of air pollutants is strongly controlled by the stability of the atmosphere. For example, the diurnal variation of the net radiation received at the ground surface causes the vertical turbulent transport to be much stronger during daytime as compared to the night. We use the Dutch Atmospheric Large-Eddy Simulation (DALES) model to study the dispersion of air pollutants that are emitted at local spots in urban areas. To take into account the presence of buildings the immersed boundary method has been implemented in DALES. We use data from the 'Algemene Hoogtekaart Nederland' which provides the building heights at a very high spatial resolution (< 1 m). The large-scale meteorological forcings such as, for example, the horizontal pressure gradients, are taken from the KNMI mesoscale weather forecast model HARMONIE. As part of the national Ruisdael research program an intensive measurement campaign will take place in the city of Rotterdam during the summer of 2022. One of its aims is to provide data for model validation. Some preliminary simulation results will be presented.@en

The authors regret to inform the readers that a programming error was found in the numerical code described and used in the original submission [1]. Longwave trapping was not correctly scaled with the local cell size and is underpredicted for deep canyons. Calculations have been repeated and this corrigendum provides an overview of the new results for a deep canyon. All new results will be published in a forthcoming Phd thesis [2] that will made publicly available through the TU Delft website (https://repository.tudelft.nl/). The authors would like to apologise for any inconvenience caused.

@en

Momentum transport by boundary layer turbulence causes a weak synoptic-scale vertical motion. The classical textbook solution for the strength of this Ekman pumping depends on the curl of the surface momentum flux. A new solution for Ekman pumping is derived in terms of the curl of the geostrophic wind and a term that depends in a nontrivial way on the vertical profile of the turbulent momentum flux. The solution is confined to a boundary layer regime that is vertically well mixed and horizontally homogeneous. The momentum flux is computed from a commonly used bulk surface drag formula and a flux jump relation to capture the entrainment flux of momentum at the top of the boundary layer. It is found that the strength of Ekman pumping is bounded. The weakening of Ekman pumping for enhanced turbulent surface friction can be explained from the fact that it will reduce the magnitude of the horizontal wind. It is demonstrated that entrainment of momentum across the top of the boundary layer tends to diminish the large-scale divergence of the wind. As momentum transport is parameterized in large-scale models, the analysis is relevant for the understanding and interpretation of the evolution of synoptic-scale vertical motions as predicted by such models.

@en

We have identified certain fundamental limitations of a mixing-length parametrization used in a popular turbulent kinetic energy-based subgrid-scale model. Replacing this parametrization with a more physically realistic one significantly improves the overall quality of the large-eddy simulation (LES) of stable boundary layers. For the range of grid sizes considered here (specifically, 1 m–12.5 m), the revision dramatically reduces the grid-size sensitivity of the simulations. Most importantly, the revised scheme allows us to reliably estimate the first- and second-order statistics of a well-known LES intercomparison case, even with a coarse grid size of O(10 m).

@en

Motivated by an observed relationship between marine low cloud cover and surface wind speed, this study investigates how vertical wind shear affects trade-wind cumulus convection, including shallow cumulus and congestus with tops below the freezing level. We ran large-eddy simulations for an idealized case of trade-wind convection using different vertical shears in the zonal wind. Backward shear, whereby surface easterlies become upper westerlies, is effective at limiting vertical cloud development, which leads to a moister, shallower, and cloudier trade-wind layer. Without shear or with forward shear, shallow convection tends to deepen more, but clouds tops are still limited under forward shear. A number of mechanisms explain the observed behavior: First, shear leads to different surface wind speeds and, in turn, surface heat and moisture fluxes due to momentum transport, whereby the weakest surface wind speeds develop under backward shear. Second, a forward shear profile in the subcloud layer enhances moisture aggregation and leads to larger cloud clusters, but only on large domains that generally support cloud organization. Third, any absolute amount of shear across the cloud layer limits updraft speeds by enhancing the downward oriented pressure perturbation force. Backward shear—the most typical shear found in the winter trades—can thus be argued a key ingredient at setting the typical structure of the trade-wind layer.

@en

To study the influence of convective momentum transport (CMT) on wind, boundary layer and cloud evolution in a marine cold air outbreak (CAO) we use large-eddy simulations subject to different baroclinicity (wind shear) but similar surface forcing. The simulated domain is large enough, (Formula presented.) km²), to develop typical mesoscale cellular convective structures. We find that a maximum friction induced by momentum transport (MT) locates in the cloud layer for an increase of geostrophic wind with height (forward shear, FW) and near the surface for a decrease of wind with height (backward shear, BW). Although the total MT always acts as a friction, the interaction of friction-induced cross-isobaric flow with the Coriolis force can develop supergeostrophic winds near the surface (FW) or in the cloud layer (BW). The contribution of convection to MT is evaluated by decomposing the momentum flux by column water vapor and eddy size, revealing that CMT acts to accelerate subcloud layer winds under FW shear and that mesoscale circulations contribute significantly to MT for this horizontal resolution (250 m), even if small-scale eddies are nonnegligible and likely more important as resolution increases. Under FW shear, a deeper boundary layer and faster cloud transition are simulated, because MT acts to increase surface fluxes and wind shear enhances turbulent mixing across cloud tops. Our results show that the coupling between winds and convection is crucial for a range of problems, from CAO lifetime and cloud transitions to ocean heat loss and near-surface wind variability.

@en

The Radiative-Convective Equilibrium Model Intercomparison Project (RCEMIP) is an intercomparison of multiple types of numerical models configured in radiative-convective equilibrium (RCE). RCE is an idealization of the tropical atmosphere that has long been used to study basic questions in climate science. Here, we employ RCE to investigate the role that clouds and convective activity play in determining cloud feedbacks, climate sensitivity, the state of convective aggregation, and the equilibrium climate. RCEMIP is unique among intercomparisons in its inclusion of a wide range of model types, including atmospheric general circulation models (GCMs), single column models (SCMs), cloud-resolving models (CRMs), large eddy simulations (LES), and global cloud-resolving models (GCRMs). The first results are presented from the RCEMIP ensemble of more than 30 models. While there are large differences across the RCEMIP ensemble in the representation of mean profiles of temperature, humidity, and cloudiness, in a majority of models anvil clouds rise, warm, and decrease in area coverage in response to an increase in sea surface temperature (SST). Nearly all models exhibit self-aggregation in large domains and agree that self-aggregation acts to dry and warm the troposphere, reduce high cloudiness, and increase cooling to space. The degree of self-aggregation exhibits no clear tendency with warming. There is a wide range of climate sensitivities, but models with parameterized convection tend to have lower climate sensitivities than models with explicit convection. In models with parameterized convection, aggregated simulations have lower climate sensitivities than unaggregated simulations.@en

The misrepresentation of the diurnal cycle of boundary layer clouds by large-scale models strongly impacts the modeled regional energy balance in southern West Africa. In particular, recognizing the processes involved in the maintenance and transition of the nighttime stratocumulus to diurnal shallow cumulus over land remains a challenge. This is due to the fact that over vegetation, surface fluxes exhibit a much larger magnitude and variability than on the more researched marine stratocumulus transitions. An improved understanding of the interactions between surface and atmosphere is thus necessary to improve its representation. To this end, the Dynamics-aerosol-chemistry-cloud interactions in West Africa (DACCIWA) measurement campaign gathered a unique dataset of observations of the frequent stratocumulus-to-cumulus transition in southern West Africa. Inspired and constrained by these observations, we perform a series of numerical experiments using large eddy simulation. The experiments include interactive radiation and surface schemes where we explicitly resolve, quantify and describe the physical processes driving such transition. Focusing on the local processes, we quantify the transition in terms of dynamics, radiation, cloud properties, surface processes and the evolution of dynamically relevant layers such as subcloud layer, cloud layer and inversion layer. We further quantify the processes driving the stratocumulus thinning and the subsequent transition initiation by using a liquid water path budget. Finally, we study the impact of mean wind and wind shear at the cloud top through two additional numerical experiments. We find that the sequence starts with a nighttime well-mixed layer from the surface to the cloud top, in terms of temperature and humidity, and transitions to a prototypical convective boundary layer by the afternoon. We identify radiative cooling as the largest factor for the maintenance leading to a net thickening of the cloud layer of about 18 g m^-2 h^-1 before sunrise. Four hours after sunrise, the cloud layer decouples from the surface through a growing negative buoyancy flux at the cloud base. After sunrise, the increasing impact of entrainment leads to a progressive thinning of the cloud layer. While the effect of wind on the stratocumulus layer during nighttime is limited, after sunrise we find shear at the cloud top to have the largest impact: the local turbulence generated by shear enhances the boundary layer growth and entrainment aided by the increased surface fluxes. As a consequence, wind shear at the cloud top accelerates the breakup and transition by about 2 h. The quantification of the transition and its driving factors presented here sets the path for an improved representation by larger-scale models.

@en

This study investigated the surface temperature, air temperature and mean radiant temperature inside an idealized 2D street geometry during daytime. The goal was to unravel the relative impact of radiative transfer, heat conduction and ventilation to the urban heat budget. A building-resolving simulation model has been used, which represents these processes at a 1 m spatial resolution. Different combinations of the canyon height to width ratio (H/W) and physical mechanisms were investigated. Shortwave radiation is the main source of energy, and for small H/W can be higher at the canyon ground level compared to flat terrain due to multiple reflections. The longwave trapping effect has the second largest contribution and becomes relatively more important with increasing H/W ratio. The influence of the interior building temperature is small. Surface temperature and mean radiant temperature are closely related, since both are largely controlled by radiative properties. No straightforward relation was found between surface temperature and air temperature, since air temperature is dependent on the competing mechanisms of forced and natural convection. A small increase in air temperature inside the canyon was observed compared to the ambient temperature above roof level. The inclusion of all key physical processes in high detail resulted in large computational requirements. If multiple reflections by the building facades are small, the more traditional, yet much simpler view factor approach will strongly reduce the computational costs as compared to the Monte Carlo technique. The influence of using the view factors on the results must be investigated.

@en

To quantify the turbulent transport at gray zone length scales between 1 and 10 km, the Lagrangian evolution of the CONSTRAIN cold air outbreak case was simulated with seven large eddy models. The case is characterized by rather large latent and sensible heat fluxes and a rapid deepening rate of the boundary layer. In some models the entrainment velocity exceeds 4 cm/s. A significant fraction of this growth is attributed to a strong longwave radiative cooling of the inversion layer. The evolution and the timing of the breakup of the stratocumulus cloud deck differ significantly among the models. Sensitivity experiments demonstrate that a decrease in the prescribed cloud droplet number concentration and the inclusion of ice microphysics both act to speed up the thinning of the stratocumulus by enhancing the production of precipitation. In all models the formation of mesoscale fluctuations is clearly evident in the cloud fields and also in the horizontal wind velocity. Resolved vertical fluxes remain important for scales up to 10 km. The simulation results show that the resolved vertical velocity variance gradually diminishes with a coarsening of the horizontal mesh, but the total vertical fluxes of heat, moisture, and momentum are only weakly affected. This is a promising result as it demonstrates the potential use of a mesh size-dependent turbulent length scale for convective boundary layers at gray zone model resolutions.

@en

In this work we study the dynamics of the surface-based temperature inversion over the Antarctic Plateau during the polar winter. Using 6 years of observations from the French–Italian Antarctic station Concordia at Dome C, we investigate sudden regime transitions in the strength of the near-surface temperature inversion. Here we define “near-surface” as being within the domain of the 45-m measuring tower. In particular, we consider the strongly nonlinear relation between the 10-m inversion strength (T _10m – T _s ) and the 10-m wind speed. To this end, all individual events for which the 10-m inversion strength increases or decreases continuously by more than 15 K in time are considered. Composite time series and vertical profiles of wind and temperature reveal specific characteristics of the transition from weak to very strong inversions and vice versa. In contrast to midlatitudes, the largest variations in temperature are not found at the surface but at a height of 10 m. A similar analysis was performed on results from an atmospheric single-column model (SCM). Overall, the SCM results reproduce the observed characteristics of the transitions in the near-surface inversion remarkably well. Using model output, the underlying mechanisms of the regime transitions are identified. The nonlinear relation between inversion strength and wind speed at a given level is explained by variations in the geostrophic wind speed, changes in the depth of the turbulent layer and the vertical divergence of turbulent fluxes. Moreover, the transitions between different boundary layer regimes cannot be explained without considering the contribution of subsidence heating.

@en

We present a proof-of-concept for the adaptive mesh refinement method applied to atmospheric boundary-layer simulations. Such a method may form an attractive alternative to static grids for studies on atmospheric flows that have a high degree of scale separation in space and/or time. Examples include the diurnal cycle and a convective boundary layer capped by a strong inversion. For such cases, large-eddy simulations using regular grids often have to rely on a subgrid-scale closure for the most challenging regions in the spatial and/or temporal domain. Here we analyze a flow configuration that describes the growth and subsequent decay of a convective boundary layer using direct numerical simulation (DNS). We validate the obtained results and benchmark the performance of the adaptive solver against two runs using fixed regular grids. It appears that the adaptive-mesh algorithm is able to coarsen and refine the grid dynamically whilst maintaining an accurate solution. In particular, during the initial growth of the convective boundary layer a high resolution is required compared to the subsequent stage of decaying turbulence. More specifically, the number of grid cells varies by two orders of magnitude over the course of the simulation. For this specific DNS case, the adaptive solver was not yet more efficient than the more traditional solver that is dedicated to these types of flows. However, the overall analysis shows that the method has a clear potential for numerical investigations of the most challenging atmospheric cases.

@en