The protection of DC systems in mobility applications, such as land transport, aircraft, and shipping, presents significant challenges due to the need for high power density equipment in confined spaces. This paper focuses on DC systems on board ships, for which diverse applications require different power levels, architectures, and protection strategies. Existing protection frameworks and regulations are often inadequate or outdated for the field, leading to certification issues and insufficient fault analysis. This research proposes a use case-based categorization of short circuit currents for primary systems. A reference scenario is created using a simulation model of a 5 MW system in a superyacht to provide a short circuit inventory. The study proposes three contributions. A comprehensive fault inventory, a qualitative categorization, and relevant recommendations for power converter design. The research highlights the importance of fault categorization in understanding the impact of various short circuits on shipboard DC systems. The study emphasizes the importance of the evolution of materials and power converters in developing efficient protection technologies for ships. This work addresses some fundamental gaps in shipboard DC systems, providing a foundation for improved protection strategies and regulations, ultimately contributing to the advancement of protection of shipboard DC systems.

This paper proposes an integrated gate driver featuring soft turn-off and current limiting for a solid-state circuit breaker in primary shipboard DC systems. The added functionalities allow solid-state circuit breakers to mitigate part of the voltage resonances caused by a hard turn-off, and to reduce unnecessary tripping during overloading events. The proposed design is based on well-known DC protection strategies, which are enhanced by the custom gate driver, simulated in SPICE software. The paper shows that the proposed strategy effectively attenuates the adverse effects of the hard turn-off present in popular off-the-shelf devices, while effectively breaking the fault current. The low propagation delay of the selected components facilitates the rapid break of the current, reaching approximately 69A peak. In addition, the latch current limiter prevents the feeder from overloading, creating a voltage drop of 51% for tens of nanoseconds. The results are promising in motivating future prototyping of the design in an attempt to accelerate the acceptance of shipboard DC systems.

This article gives an overview of challenges in primary distribution, protections, and power scalability for shipboard dc systems. Given that dc technology is in development, several aspects of shipboard systems have not yet been sufficiently devised to ensure the protection and efficiency demanded. Several issues in dc systems arise from the lack of complete relevant standardization from different regulation bodies. Unipolar and bipolar bus architectures have application-specific advantages that are discussed and compared. The placement of power electronics in dc systems creates opportunities for switchboard design, and this article compares the centralized and distributed approaches. Likewise, protection architectures for shipboard dc systems have challenges. Breaker-based protection utilizes slow fuses, mechanical circuit breakers, and solid-state circuit breakers. In addition, power-electronics-based protection embeds the protective circuit in the power converters, but its development lags. This article compares the state-of-the-art technologies, reviewing their main features. Finally, the power requirement of various applications and the low production rate of vessels force the designers to utilize commercial off-the-shelf converters to scale up power. The misuse of such converters, the modular topologies, and power electronics building blocks are exposed highlighting challenges and opportunities toward the mass adoption of dc systems onboard maritime vessels.