The valorization of fruit-derived residues under the biorefinery concept has been a topic of interest in the last years due to the presence of high value-added substances in their composition. However, feasible alternatives for their implementation at an industrial level are still being developed since the abundance of pectin and extractives has made its biorefining challenging compared to conventional lignocellulosic residues. In this study, the sequential valorization of Orange Residues (OR) in a biorefinery was evaluated following the principles of biomass cascading and considering the composition of residual streams as a valuable input to maximize recovery after each processing step, without focusing on a sole product. To extract full value from the side-streams, fermentation with conventional and non-conventional yeasts was explored. The proposed biorefinery sequence produced essential oils, phenolic compounds, pectin, and fermentable sugars that were later converted to ethanol, xylitol, and single-cell protein. A detailed mass balance allowed to track compositional changes throughout the cascade and identify how extraction substances accumulate after each step, affecting further processing and side-stream utilization. The sequence proposed in this work extracted/transformed ∼85 % of the initial biomass into value-added products.@en

Compositional data on vegetable biomass is widely available from research papers and online databases. However, the high diversity of biomass characteristics and composition represents a challenge for researchers and companies willing to produce novel substances from residues, and that should decide on the best and most feasible options for their use as feedstocks. The present study constructed a database with information gathered from the proximate, ultimate, and chemical composition of different biomass residues that can be used for data analysis and classification to elucidate better how they can be valorized. Different data clustering techniques were implemented to determine how compositional data can be segmented. The identified groups, that contained residues with similar characteristics, allowed to have an insight into the valorization of these biomasses, which can be used as an initial tool for biorefinery design. The use of data clustering facilitated the identification of different types of biomasses in a systematic way, which until now has not been reported in the literature.@en

Table 2 in printed publication was miss-set, and should read as follows: [Table presented] The authors would like to apologize for any inconvenience caused.

@en

Development of affordable and low carbon biobased manufacturing depends critically on strategies that reduce cost and emission profiles. This paper indicates that efforts around the reduction of capital costs by intensification of process equipment need to be carefully weighed against the inherently fast increasing financial and climate costs of driving forces used for the intensification. The fundamental relation between capital expenditures (CAPEX) and operational expenditures (OPEX) of intensified and non-intensified biobased processes and their financial and climatic impacts are emphasized and provisionally explored for a few industrial processes. General learnings flag the importance in particular of OPEX minimisation for sustainable bio-economic development.

@en

The enzymatic conversion of lignocellulosic material to sugars can provide a carbon source for the production of energy (fuels) and a wide range of renewable products. However, the efficiency of this conversion is impaired due to product (sugar) inhibition. Even though several studies investigate how to overcome this challenge, concepts on the process to conduct the hydrolysis are still scarce in literature. Aqueous two-phase systems (ATPS) can be applied to design an extractive reaction due to their capacity to partition solutes to different phases in such a system. This work presents strategies on how to conduct extractive enzymatic hydrolysis in ATPS and how to explore the experimental results in order to design a feasible process. While only a limited number of ATPS was explored, the methods and strategies described could easily be applied to any further ATPS to be explored. We studied two promising ATPS as a subset of a previously high throughput screened large set of ATPS, providing two configurations of processes having the reaction in either the top phase or in the bottom phase. Enzymatic hydrolysis in these ATPS was performed to evaluate the partitioning of the substrate and the influence of solute partitioning on conversion. Because ATPS are able to partition inhibitors (sugar) between the phases, the conversion rate can be maintained. However, phase forming components should be selected to preserve the enzymatic activity. The experimental results presented here contribute to a feasible ATPS-based conceptual process design for the enzymatic conversion of lignocellulosic material.

@en

Aqueous two-phase systems (ATPS) can be applied to enzymatic reactions that are affected by product inhibition. In the biorefinery context, sugars inhibit the cellulolytic enzymes in charge of converting the biomass. Here, we present a strategy to select an ATPS (formed by polymer and salt) that can separate sugar and enzymes. This automated and miniaturized method is able to determine phase diagrams and partition coefficients of solutes in these. Tailored approaches to quantify the solutes are presented, taking into account the limitations of techniques that can be applied with ATPS due to the interference of phase forming components with the analytics. The developed high-throughput (HT) platform identifies suitable phase forming components and the tie line of operation. This fast methodology proposes to screen up to six different polymer-salt systems in eight days and supplies the results to understand the influence of sugar and protein concentrations on their partition coefficients.

@en

This study presents a techno-economic analysis and an environmental assessment, of the whole production chain (biomass production, sugar extraction, biomass pretreatment, sugars fermentation, and products recovery and purification), of a fully autarkic sugarcane-based biorefinery for biojet fuel production. All scenarios considered correspond to 1st/2nd generation integrated biorefineries (i.e. simultaneous use of sugarcane juice stream and lignocellulosic fractions) with a production scale of 208 kton (biojet fuel) yr^-1. In this paper, we compared multiple options for the most relevant processing steps of the biorefinery: eight biomass pretreatment technologies (i.e. dilute acid, dilute acid + alkaline treatment, steam explosion, steam explosion + alkaline treatment, organosolv, alkaline wet oxidation, liquid hot water and liquid hot water + alkaline treatment); two biojet fuel production routes from sugars (i.e. ethanol to jet and direct fermentation); one biojet fuel production route from biomass (i.e. fast pyrolysis); two biojet fuel production routes from lignin obtained after biomass pretreatment (i.e. fast pyrolysis and gasification Fischer- Tropsch); and one alternative use for lignin (i.e. co-generation). From the combination of these key features, 81 scenarios are selected and compared. Furthermore, three potential technological improvements were analysed for selected scenarios: i) recovery of acetic acid and furfural (for cases with bagasse pretreatment); ii) production of succinic acid from a fraction of concentrated juice; iii) increase of operation time (from 200 to 320 days yr^-1) by using sweet sorghum as cumulative feedstock. The different scenarios are compared first based on the minimum jet fuel selling price (MJSP) and then based on their environmental performance (i.e. greenhouse gas (GHG) emissions and non-renewable energy use (NREU)). Among the scenarios considering biomass pretreatment, the lower MJSP are obtained when 1G/2G sugars are upgraded via ethanol fermentation (ETJ) (i.e. SO₂ steam explosion: 3409 US $.ton^-1, and wet oxidation: 3230 US $.ton^-1). Additional technological improvements may help to further reduce the MJSP either marginally (2%, by using 1G sugars for succinic acid production) or significantly (30%, by increasing the operation time). Thus, the lowest MJSP here calculated is 1725 US $.ton^-1 (with 1G sugars to biojet fuel via ethanol, and bagasse to biojet fuel via fast pyrolysis). Finally, for all scenarios considered, the GHG emissions and NREU were found to be lower than 42.5 kg CO₂eq.GJ^-1 and 700 MJ GJ ^-1 respectively (except for scenarios with fast pyrolysis of bagasse where those figures were further reduced by 50% and 80% respectively). Although, the MJSP calculated for all scenarios are higher than those of the fossil jet fuel reference, the significant potential for environmental impacts reduction (in terms of GHG emissions and primary energy use) are encouraging for further research in costs reduction and technology development.

@en