Within the past half century, Integrated Circuits (ICs) experienced an aggressive, performance driven, technology feature size scaling. As the technology scaled into the deep nanometer range, physical and quantum mechanical effects that were previously irrelevant become influential, or even dominant, resulting in, e.g., not any longer negligible leakage currents. When attempting to pattern such small-geometry dimensions, the variability of technological parameters considerably gained importance. Furthermore, it became more difficult to reliably handle and integrate such a huge number of tiny transistors into large scale ICs, considering also that a substantial increase in power density needed to be taken into account. Scaling induced performance was no longer sufficient for delivering the expected improvements, which lead to a paradigm switch from uniprocessors to multiprocessor micro-architectures. At the same time, since for certain application domains, such as big data and Internet of things, the to be processed data amount increases substantially, computing system designers become more concerned with ensuring data availability than with reducing functional units latency. As a result, state of the art computing systems employ complex memory hierarchies, consisting of up to four cache levels with multiple shared scenarios, making memory a dominant design element that considerably influences the overall system performance and correct behavior. In this context, 3D Stacked Integrated Circuit (3D SIC) technology emerges as a promising avenue in enabling new design opportunities since it provides the means to interconnect devices with short vertical wires. In this thesis we address the above mentioned memory challenges by investigating the 3D SIC technology utilization in memory designs, as follows. First, we propose a novel banked multi-port polyhedral memory that provides an enriched access mechanism set with a very low bank conflict rate and we evaluate its potential in shared caches. Second, we propose a low power hybrid memory in which 3D technology allows for the smooth co-integration of: (i) short circuit current free Nano-Electro-Mechanical Field Effect Transistor (NEMFET) based inverters for data storage, and, (ii) CMOS-based logic for read/write operations and data preservation. Third, we propose a memory repair framework that exploits the 3D vertical proximity for inter-die redundant resources sharing. Finally, we propose novel schemes for performing user transparent multi-error correction and detection, with the same or even lower redundancy than the one required by state of the art extended Hamming single error correction schemes. @en

The 3D stacked hybrid memory relies on a hysteretic Nano-Electro-Mechanical Field Effect Transistor (NEMFET) inverter to store data, and on adjacent CMOS based logic to allow for read/write operations, and data preservation. In this paper we assess the feasibility of a hybrid memory cell, and explore the design space of 3D stacked hybrid dual-port memory arrays which combine the appealing NEMFET properties, i.e., ultra-low leakage currents and abrupt switching, with the CMOS technology versatility. In the evaluation we performed a comparison in terms of footprint, access time, and energy, against state of the art CMOS dual-ports memories, considering small and large size memory arrays (8-Kbytes up to 128-Kbytes) implemented in various technology nodes. The 3D NEMFETCMOS hybrid dual-port memory is on the average 25% smaller and 8% and 95% larger in terms of footprint when compared to 90nm, 65nm and 45nm CMOS implementations, respectively. The write access time is approximately 2 higher, as it is dominated by the mechanical movement of the NEMFET’s suspended gate, while the read access time is about 12% lower, when compared with 45nm CMOS counterparts. For small size memories our proposal results in at least 15% and 23% energy reductions for 100% and 50% data transition probability, respectively. For large size memories an energy reduction of about 40% was obtained, as in this case the static energy is predominant.@en

In this paper we propose a novel error correction scheme/architecture specially tailored for polyhedral memories which: (i) allows for the formation of long codewords without interfering with the memory architecture/addressing mode/data granularity and (ii) make use of codecs located on a dedicated tier of the 3D memory stack. For a transparent error correction process we propose an online memory scrubbing policy that performs the error detection and correction decoupled from the normal memory operation. To evaluate our proposal we consider as a case study a 4-die 4-MB polyhedral memory and simulate various data width codes implementations. The simulations indicate that our proposal outperforms state of the art single error correction schemes in terms of error correction capability, being able to diminish the Word Error Rates (WER) by many orders of magnitude, e.g., WER from 10^-10 to 10^-21 are achieved for bit error probabilities between 10^-4 and 10^-6, while requiring less redundancy overhead. The scrubbing mechanism hides the codec latency and provides up to 10% and 25% write and read latency reductions, respectively. In addition, by relocating the encoders/decoders from the memory dies to a dedicated one a 13% footprint reduction is obtained and parallel energy effective scrubbing can be enabled, which results in further WER reductions.

@en

In this paper we introduce a novel error resilient memory architecture potentially applicable to a large range of memory technologies. In contrast with state of the art memory error correction schemes, which rely on (extended Hamming) Error Correcting Codes (ECC), we make use of Low Density Parity Check (LDPC) codes due to their close to the Shannon performance limit error correction capabilities. To allow for a cost-effective implementation we build our approach on top of a 3D memory organization which inherently fast and customizable wide-I/O vertical access allows for a smooth transfer of the required LDPC long code-words to/from an error correction dedicated die. To make the error correction process transparent to the memory users, e.g., processing cores, we propose an online memory scrubbing policy that performs the LDPC-based error detection and correction decoupled from the normal memory operation. For evaluation purposes we consider 3D memories protected by the proposed LDPC mechanism with various data width codes implementations. Simulation results indicate that our proposal clearly outperforms state of the art ECC schemes with fault tolerance improvements by a 4710× factor being obtained when compared to extended Hamming ECC. Furthermore, we evaluate instances of the proposed memory concept equipped with different LDPC codecs implemented on a commercial 40nm low-power CMOS technology and evaluate them on actual memory traces in terms of error correction capability, area, latency, and energy. Our results indicate that the LDPC protected memories offer substantially improved error correction capabilities, when compared to state of the art extended Hamming ECC, being able to assure clean runs for memory error rates α <; 3 × 10-2, which demonstrate that our proposal can potentially successfully protect system on a chip memory systems even in very harsh environmental conditions.@en