Activated carbon is employed for the adsorption of organic micropollutants (OMPs) from water, typically present in concentrations ranging from ng L⁻¹ to μg L⁻¹. However, the efficacy of OMP removal is considerably deteriorated due to competitive adsorption from background dissolved organic matter (DOM), present at substantially higher concentrations in mg L⁻¹. Interpreting the characteristics of competitive DOM is crucial in predicting OMP adsorption efficiencies across diverse natural waters. Molecular weight (MW), aromaticity, and polarity influence DOM competitiveness. Although the aromaticity-related metrics, such as UV₂₅₄, of low MW DOM were proposed to correlate with DOM competitiveness, the method suffers from limitations in understanding the interplay of polarity and aromaticity in determining DOM competitiveness. Here, we elucidate the intricate influence of aromaticity and polarity in low MW DOM competition, spanning from a fraction level to a compound level, by employing direct sample injection liquid chromatography coupled with ultrahigh-resolution Fourier-transform ion cyclotron resonance mass spectrometry. Anion exchange resin pre-treatment eliminated 93% of UV₂₅₄-active DOM, predominantly aromatic and polar DOM, and only minimally alleviated DOM competition. Molecular characterization revealed that nonpolar molecular formulas (constituting 26% PAC-adsorbable DOM) with medium aromaticity contributed more to the DOM competitiveness. Isomer-level analysis indicated that the competitiveness of highly aromatic LMW DOM compounds was strongly counterbalanced by increased polarity. Strong aromaticity-derived π-π interaction cannot facilitate the competitive adsorption of hydrophilic DOM compounds. Our results underscore the constraints of depending solely on aromaticity-based approaches as the exclusive interpretive measure for DOM competitiveness. In a broader context, this study demonstrates an effect-oriented DOM analysis, elucidating counterbalancing interactions of DOM molecular properties from fraction to compound level.

@en

A field injection experiment was performed in an anoxic sandy aquifer over 6 days to assess sorption characteristics of 7 commonly applied pesticides in agriculture and 2 frequently detected metabolites. Pesticide use changed considerably in the last decades, and there is insufficient knowledge of the fate of currently used pesticides in aquifers. Injected water arrival was monitored at 6 depth intervals of 1 m ranging from 11.4 to 32.2 m-below surface level with varying organic carbon contents (0.057–0.91%d.w.) to examine intra-aquifer variations in sorption. Observed pesticide concentrations were fit using a non-linear least squares routine to an advection-dispersion equation, from which retardation factors (R) were obtained. Pesticide degradation did not significantly influence the simulated R during the experiment. We observed that bentazon and cycloxydim were most mobile with R < 1.1 at all depths. Desphenyl chloridazon, methyl desphenyl chloridazon, and imidacloprid were, on average, less mobile, with maximum R of 1.5. Boscalid, chloridazon, fluopyram, and flutolanil showed a larger range of R, and R > 2.0 were observed in the shallowest part of the aquifer. Largest R were observed at the top of the aquifer and decreased with depth. K_oc values varied similarly, which indicates that sorption is not only influenced by sedimentary organic matter (SOM) content but also by its sorption reactivity. Obtained sorption parameters were substantially lower than reported in a widely used pesticide sorption database, which suggests that sorption parameters are influenced by methodological differences and variations in the sorption reactivity of SOM. The large intra-aquifer variations in pesticide sorption highlights that aquifer heterogeneity should be considered in groundwater risk assessments.

@en

It was widely acknowledged that dissolved organic matter (DOM) in natural water has ubiquitous competitiveness against organic micropollutants (OMPs) during adsorption onto activated carbon. However, some (model) low molecular weight organics have been reported to adsorb onto activated carbon, but were not competitive against co-adsorbates. The objective of this study is to identify which adsorbable DOM fractions in natural water contribute to the DOM competitiveness, and what is the impact of the OMP adsorbability and initial OMP concentration on this competitiveness. We, therefore, disassociated the adsorption of DOM fractions and OMPs (carbamazepine, caffeine and sulfamethoxazole) using a two-stage adsorption procedure, removing various adsorbable DOM fractions with powdered activated carbon pretreatment and then unraveling the competitiveness against OMPs of the remaining DOM. Our results demonstrated that DOM competition was not ubiquitous for all adsorbable fractions in natural water, and ∼ 25% of the adsorbable DOM was not competitive. The poorly adsorbable DOM was shown to be a non-competitive co-adsorbate, and its complexation even elevated the adsorption capacity of one of the OMPs (carbamazepine). The amount of DOM competitors increased for weaker adsorbable OMPs, and at higher initial OMP concentrations. The variability in DOM competition, differentiated by DOM adsorbability, has advanced the understanding of DOM competition, from ubiquitous competition to variable roles (varying competitiveness/complementary adsorption) of differently adsorbable DOM fractions during OMP adsorption.

@en

Millions of people worldwide are exposed to excessive concentrations of fluoride (F⁻) from groundwater sources. Ca-Al-CO₃ layered double hydroxides (LDHs) have shown promising defluoridation efficiency; however, defluoridation by Ca-Al-CO₃ LDHs is highly pH sensitive. This study showed that simultaneous acidification by conventional acids, such as HCl and CO₂ substantially increased the performance of Ca-Al-CO₃ LDHs for F- removal at environmentally relevant concentrations (e.g., 10 mg/L) to below the WHO guideline value (1.5 mg/L), while, in comparison to other acids (HNO₃, H₂SO₄, H₃PO₄), the use of HCl and CO₂ does not lead to the introduction of potentially harmful or undesired anions. The addition of HCl and CO₂ to LDHs suspensions did lead to changes to the LDHs structure. Leaching experiments, supported by PHREEQC modelling and characterization (SEM-EDX, XRD and FTIR), strongly suggest that the main mechanism of F- removal by Ca-Al-CO₃ LDHs was F⁻ adsorption or complexation onto/into various rehydrated mixed metal oxides which re-precipitated upon partial LDHs dissolution when acidifying.

@en

This chapter provides some fundamental aspects on adsorption of pharmaceutically active compounds in wastewater treatment scenarios, with a strong focus on actual practicality and the most recent scientific output. It discusses the key properties of adsorbing substances and adsorbent materials impacting the associated removals. The text demonstrates how adverse competitive effects by dissolved organic matter substantially impact adsorption of targeted compounds. This chapter further highlights possibilities for efficiently exploiting the available capacities of powdered and granular adsorbents. It introduces several practical and easily applicable means for prediction of the occurring adsorptive processes. In addition, the text provides some insights into available adsorbents and new material developments, comparing their advantages, downsides, and overall potentials for successful application. The last section gives a short overview on the associated environmental impacts and costs of adsorptive stages when installed on wastewater treatment plants. The conclusion summarizes the main findings and relates them to open research questions and additional future needs beyond strictly scientific disciplines.

@en

Low molecular weight (LMW) dissolved organic matter (DOM) is the predominant competitor for adsorption sites against organic micropollutants (OMPs) in activated carbon adsorption. However, top-down approaches using highly complex mixtures of real water DOM do not allow to concisely examine the impacts of specific LMW DOM molecular properties on competitive adsorption. Therefore, we followed a bottom-up approach using fifteen model compounds (mDOM) to elucidate how important DOM characteristics, including hydrophobicity and unsaturated structures (ring, double/triple bond), impact competitiveness. Large concentration asymmetry (~500 μg DOC/μg OMP) made mDOM compounds, which were overall less preferentially adsorbed than OMPs, become competitive against OMPs and inhibit OMP adsorption kinetics by pre-occupation of adsorption sites. Our results revealed that both hydrophobicity interactions and π-interactions increased mDOM competitiveness, while π-interactions outweighed hydrophobic interactions. However, π-interactions could not be satisfactorily evaluated with a parameter such as specific ultraviolet absorbance (SUVA) due to interferences of carboxyl groups in aromatic mDOMs. Instead, mDOM adsorbability, described by mDOM adsorption capacity, proved to be a comprehensive indicator for mDOM competitiveness. To our knowledge, this is the first study that systematically clarifies the impacts of intricately interacting molecular properties on DOM adsorption and the related competition against OMP adsorption. DOM adsorbability may inspire a new fractionation, and assist the further isolation, identification and detailed characterization of LMW DOM competitors in real DOM-containing waters.

@en

In this study, F⁻ removal by Ca–Al–CO₃ layered double hydroxides (LDHs) was investigated at environmentally-relevant concentration ranges (2–12 mg/L) to below the WHO guideline, with an emphasis on the effect of LDHs’ modification, as well as the effects of initial F⁻ concentration, adsorbent dose, pH, temperature and co-existing ions. Ca–Al–CO₃ LDHs, either untreated, calcined or microwave treated, showed affinity for the removal of F⁻ from synthetic groundwater with capacities of 6.7–8.4 mg F⁻/g LDHs at groundwater-relevant pH, with a higher F⁻ removal capacity at lower pH (<8) and lower temperature (12 °C, as compared to 25 °C & 35 °C). Since calcination and microwave treatment resulted in only marginal defluorination improvements, using untreated LDHs appears the practically most feasible option. For the untreated LDHs, competition with Cl⁻ and NO₃⁻ was not observed, whereas at higher HCO₃⁻ and SO₄²⁻ concentrations (>250 mg/L) a slight reduction in F⁻ removal was observed. This study indicates the potential of Ca–Al–CO₃ LDHs as a cost-effective F⁻ removal technology, particularly when locally sourced and in combination with low-cost pH correction.

@en

Though the ozone-activated carbon process has been widely applied for drinking water purification, little is known about how ozone-modified natural organic matter (NOM) competes with micropollutants in activated carbon adsorption. In this study, three natural waters and one synthetic water (standard humics solution) with highly heterogeneous NOM compositions were employed to investigate the interference of ozonated NOM with the adsorption of 2-methylisoborneol (MIB). Analysis using liquid chromatography with online carbon and UV₂₅₄ detection (LC-OCD-UVD) revealed that ozonation led to various disintegration patterns of macromolecules in NOM, and UV absorbance was reduced markedly for nearly all NOM fractions. Powdered activated carbon (PAC) adsorption experiments showed that increasing ozone consumption coincided with reducing NOM competition against MIB in the three natural waters, as expressed by the fitted initial concentrations of the equivalent background compound (c_0,EBC). In the synthetic water, in contrast, competition increased under low/moderate specific ozone consumptions and then decreased with further elevation of ozone consumptions. Regarding the significance on affecting ozonated NOM interference, aromaticity reduction outweighed formation of low molecular weight (LMW) organics in most cases, enhancing MIB adsorption capacity. However, disintegration of the humics fraction with larger molecular weight (1,103 g/mol, as compared to 546–697 g/mol in three natural waters) into smaller, more competitive fractions caused the observed initial deteriorated MIB adsorption in synthetic water. A superior correlation between c_0,EBC and the UV absorbance of LMW organics (R² = 0.93) over concentrations of LMW organics underlined the importance of the aromatic properties in competitive adsorption projection for ozone pretreated natural waters. Furthermore, the change of relative concentration of UV absorbing compounds during ozonation could help estimate the decrease of c_0,EBC, which could be a promising tool for waterworks to adjust PAC doses for MIB removal in ozonated waters.

@en

Powdered activated carbon (PAC) for organic micro-pollutant (OMP) removal can be applied effectively on wastewater treatment plant (WWTP) effluents by using re-circulation schemes, accumulating the PAC in the system. This technique is complex because several factors are unknown: (i) the PAC concentration in the system, (ii) specific and average contact times of PAC particles, and (iii) PAC particle loadings with target compounds/competing water constituents. Thus, performance projections (e.g. in the lab) are very challenging. We sampled large-scale PAC plants with PAC sludge re-circulation on eight different WWTPs. The PAC plant-induced OMP removals were notably different, even when considering PAC concentrations in proportion to background organic sum parameters. The variability is likely caused by differing PAC products, varying water composition, differently effective plant/re-circulation operation, and variable biodegradation. Plant PAC samples and parts of the PAC plant influent samples were used in laboratory tests, applying multiples (0.5, 1, 2, 4) of the respective large-scale “fresh” PAC doses, and several fixed contact times (0.5, 1, 2, 4, 48 h). The aim was to empirically identify suitable combinations of lab PAC dose (as multiples of the plant PAC dose) and contact time, which represent the PAC plant performances in removing OMPs (for specific OMPs at single locations, and for averages of different OMPs at all locations). E.g., for five well adsorbing, little biodegradable OMPs, plant performances can be projected by using a lab PAC dose of twice the respective full-scale PAC dose and 4 h lab contact time (standard deviation of 13 %-points).

@en

The adsorption of organic micropollutants (OMP) onto activated carbon (AC) in real waters is strongly affected by dissolved organic matter (DOM). This study examines the impact of DOM quantity and composition in terms of OMP desorption from different AC, by using four different water samples. In batch tests, an OMP concentration drop in the influent of an AC treatment system was simulated. These tests were conducted with six AC products with different internal pore structures. The tests were evaluated with respect to the extent of OMP desorption by interpreting corresponding OMP adsorption and desorption isotherms. For each tested AC and each evaluated OMP the isotherms in the different water samples were qualitatively very similar. Thus, despite different DOM composition very similar OMP desorption extents can be expected in different waters. Among the AC products a clear trend can be seen in all waters, namely that increasing pore size results in increasing desorption. The OMP desorption extent was quantified by a simple Freundlich equation-based approach, expressing the relative position of corresponding adsorption and desorption isotherms via the ratio K_{F, Des}/K_{F, Ads}. Plotting K_{F, Des}/K_{F, Ads} of any given substance for the different tested AC in one water over the average AC pore size shows a linear correlation. This confirms that the OMP desorption extent in real waters is strongly impacted by the AC pore structure. Furthermore, it indicates that the average AC pore size might be a good tool to assess the vulnerability of treatment systems towards desorption.

@en

Whereas the adsorption of organic micropollutants (OMP) onto activated carbon (AC) is relatively well studied, little is known about potential OMP desorption effects, especially in real waters. In this study, the impact of different fractions of drinking water DOM on OMP desorption from AC was examined. By different pre-treatments of a raw drinking water, a high molecular weight (hmw) and a low molecular weight (lmw) DOM solution were prepared. These solutions were used as background matrix in AC adsorption/desorption batch tests, simulating a drop of the OMP inflow concentration to a fixed-bed adsorber. The tests were conducted in parallel with three AC of different pore structures (microporous, mesoporous/balanced, macroporous). The tests were evaluated with respect to the extent of OMP adsorption and its reversibility, which represents the potential extent of OMP desorption. In terms of OMP adsorption, the lmw-DOM fraction induced a higher competitive effect on OMP adsorption in comparison to the hmw-DOM fraction. In terms of their impact on OMP desorption extent, both fractions led to very similar results. In case of the macroporous AC, both DOM fractions induce an enhanced OMP desorption that can be attributed to displacement effects in both cases. For the microporous AC, an increased irreversibility of OMP adsorption was found in both cases, which shows that DOM adsorption prevents OMP desorption, independently of the size of the adsorbed DOM compounds. Whereas results from this study as well as from former studies indicate that this effect might be induced by permanent pore blockages by adsorbed DOM, further results show that there could be more complex DOM interactions that lead to the decreased desorption in case of microporous AC. Nonetheless, the very similar impact of the different DOM fractions on the reversibility of OMP adsorption indicates that the potential extent of desorption is similar in different waters (with different DOM composition) and primarily depending on the pore structure of the used AC.@en

Adsorption onto ferric hydroxide is a known method to reach very low residual phosphate concentrations. Silicate is omnipresent in surface and industrial waters and reduces the adsorption capacity of ferric hydroxides. The present article focusses on the influences of silicate concentration and contact time on the adsorption of phosphate to a micro-sized iron hydroxide adsorbent (μGFH) and fits adsorption data to multi-component adsorption isotherms. In Berlin drinking water (DOC of approx. 4 mg L^-1) at pH 7.0, loadings of 24 mg g^-1 P (with 3 mg L^-1 initial PO₄^3--P) and 17 mg L^-1 Si (with 9 mg L^-1 initial Si) were reached. In deionized water, phosphate shows a high percentage of reversible bonds to μGFH while silicate adsorption is not reversible probably due to polymerization. Depending on the initial silicate concentration, phosphate loadings are reduced by 27, 33 and 47% (for equilibrium concentrations of 1.5 mg L^-1) for 9, 14 and 22 mg L^-1 Si respectively. Out of eight tested multi-component adsorption models, the Extended Freundlich Model Isotherm (EFMI) describes the simultaneous adsorption of phosphate and silicate best. Thus, providing the means to predict and control phosphate removal. Longer contact times of the adsorbent with silicate prior to addition of phosphate reduce phosphate adsorption significantly. Compared to 7 days of contact with silicate (c₀ = 10 mg L^-1) prior to phosphate (c₀ = 3 mg L^-1) addition, 28 and 56 days reduce the μGFH capacity for phosphate by 21 and 43%, respectively.

@en