Current Artificial Intelligence (AI) computation systems face challenges, primarily from the memory-wall issue, limiting overall system-level performance, especially for Edge devices with constrained battery budgets, such as smartphones, wearables, and Internet-of-Things sensor systems. In this paper, we propose a new SRAM-based Compute-In-Memory (CIM) accelerator optimized for Spiking Neural Networks (SNNs) Inference. Our proposed architecture employs a multiport SRAM design with multiple decoupled Read ports to enhance the throughput and Transposable Read-Write ports to facilitate online learning. Furthermore, we develop an Arbiter circuit for efficient data-processing and port allocations during the computation. Results for a 128×128 array in 3nm FinFET technology demonstrate a 3.1× improvement in speed and a 2.2× enhancement in energy efficiency with our proposed multiport SRAM design compared to the traditional single-port design. At system-level, a throughput of 44 MInf/s at 607 pJ/Inf and 29mW is achieved.

Computation-in-Memory (CIM) is an emerging computing paradigm to address memory bottleneck challenges in computer architecture. A CIM unit cannot fully replace a general-purpose processor. Still, it significantly reduces the amount of data transfer between a traditional memory unit and the processor by enriching the transferred information. Data transactions between processor and memory consist of memory access addresses and values. While the main focus in the field of in-memory computing is to apply computations on the content of the memory (values), the importance of CPU-CIM address transactions and calculations for generating the sequence of access addresses for data-dominated applications is generally overlooked. However, the amount of information transactions used for "address"can easily be even more than half of the total transferred bits in many applications. In this article, we propose a circuit to perform the in-memory Address Calculation Accelerator. Our simulation results showed that calculating address sequences inside the memory (instead of the CPU) can significantly reduce the CPU-CIM address transactions and therefore contribute to considerable energy saving, latency, and bus traffic. For a chosen application of guided image filtering, in-memory address calculation results in almost two orders of magnitude reduction in address transactions over the memory bus.