We present an ultra-low-power Bluetooth low-energy (BLE) transceiver (TRX) for the Internet of Things (IoT) optimized for digital 28-nm CMOS. A transmitter (TX) employs an all-digital phase-locked loop (ADPLL) with a switched current-source digitally controlled oscillator (DCO) featuring low frequency pushing, and class-E/F₂ digital power amplifier (PA), featuring high efficiency. Low 1/ f DCO noise allows the ADPLL to shut down after acquiring lock. The receiver operates in discrete time at high sampling rate (10 Gsamples/s) with intermediate frequency placed beyond 1/ f noise corner of MOS devices. New multistage multirate charge-sharing bandpass filters are adapted to achieve high out-of-band linearity, low noise, and low power consumption. An integrated on-chip matching network serves to both PA and low-noise transconductance amplifier, thus allowing a 1-pin direct antenna connection with no external band-selection filters. The TRX consumes 2.75 mW on the RX side and 3.7 mW on the TX side when delivering 0 dBm in BLE.

@en

The zero/low intermediate frequency (IF) receiver (RX) architecture has enabled full CMOS integration. As the technology scales and wireless standards become ever more challenging, the issues related to time-varying dc offsets, the second-order nonlinearity, and flicker noise become more critical. In this paper, we propose a new architecture of a superheterodyne RX that attempts to avoid such issues. By exploiting discrete-time (DT) operation and using only switches, capacitors, and inverter-based gm-stages as building blocks, the architecture becomes amenable to further scaling. Full integration is achieved by employing a cascade of four complex-valued passive switched-cap-based bandpass filters sampled at 4× of the local oscillator rate that perform IF image rejection. Channel selection is achieved through an equivalent of the seventh-order filtering. A new twofold noise-canceling low-noise transconductance amplifier is proposed. Frequency domain analysis of the RX is presented by the proposed DT model. The RX is wideband and covers 0.4-2.9 GHz with a noise figure of 2.9-4 dB. It is implemented in 65-nm CMOS and consumes 48-79 mW.@en

We present a new ultra-low-power (ULP) transceiver for Internet-of-Things (IoT) optimized for 28-nm CMOS. The receiver (RX) employs a high-rate (up to 10 GS/s) discrete-time (DT) architecture with intermediate frequency (IF) placed beyond the 1/f noise corner of MOS devices. New multistage multi-rate charge-sharing bandpass filters are adapted to achieve high out-of-band linearity, low noise and low power consumption. A transmitter (TX) employs an all-digital PLL (ADPLL) with switched-current-source digitally controlled oscillator (DCO) and switching PA. An integrated on-chip matching network serves both PA and LNTA, thus allowing a 1-pin direct antenna connection with no external antenna filters. The transceiver consumes 2.75mW in RX and 3.6mW in TX when delivering 0 dBm in Bluetooth LE.@en

In this paper, we propose and demonstrate the first fully integrated surface acoustic wave (SAW)-less superheterodyne receiver (RX) for 4G cellular applications. The RX operates in discrete-time domain and introduces various innovations to simultaneously improve noise and linearity performance while reducing power consumption: a highly linear wideband noise-canceling low-noise transconductance amplifier (LNTA), a blocker-resilient octal charge-sharing bandpass filter, and a cascaded harmonic rejection circuitry. The RX is implemented in 28-nm CMOS and it does not require any calibration. It features NF of 2.1-2.6 dB, an immeasurably high input second intercept point for closely-spaced or modulated interferers, and input third intercept point of 8-14 dBm, while drawing only 22-40 mW in various operating modes.@en