The use of deep learning-based side-channel analysis is an effective way of performing profiling attacks on power and electromagnetic leakages, even against targets protected with countermeasures. While many research articles have reported successful results, they typically focus on profiling and attacking a single device, assuming that leakages are similar between devices of the same type. However, this assumption is not always realistic due to variations in hardware and measurement setups, creating what is known as the portability problem. Profiling multiple devices has been proposed as a solution, but obtaining access to these devices may pose a challenge for attackers. This article proposes a new approach to overcome the portability problem by introducing a neural network layer assessment methodology based on the ablation paradigm. This methodology evaluates the sensitivity and resilience of each layer, providing valuable knowledge to create a Multiple Device Model from Single Device (MDMSD). Specifically, it involves ablating a specific neural network section and performing recovery training. As a result, the profiling model, trained initially on a single device, can be generalized to leakage traces measured from various devices. By addressing the portability problem through a single device, practical side-channel attacks could be more accessible and effective for attackers.

@en

This paper was selected for Top Picks in Hardware and Embedded Security 2020 and it presents a physical side-channel attack aiming at reverse engineering neural networks implemented on an edge device. The attack does not need access to training data and allows for neural network recovery by feeding known random inputs. We successfully reverse engineer information about layers, neurons, activation functions, and weights associated with neurons. This attack opens a new door in the domain of security of neural networks. Follow-up works by other researchers have shown this attack to be applicable for various settings and difficult to protect against.

@en

While several works have explored the application of deep learning for efficient profiled side-channel analysis, explainability, or, in other words, what neural networks learn remains a rather untouched topic. As a first step, this paper explores the Singular Vector Canonical Correlation Analysis (SVCCA) tool to interpret what neural networks learn while training on different side-channel datasets, by concentrating on deep layers of the network. Information from SVCCA can help, to an extent, with several practical problems in a profiled side-channel analysis like portability issue and criteria to choose a number of layers/neurons to fight portability, provide insight on the correct size of training dataset and detect deceptive conditions like over-specialization of networks.

@en

Recently, deep learning has emerged as a powerful technique for side-channel attacks, capable of even breaking common countermeasures. Still, trained models are generally large, and thus, performing evaluation becomes resource-intensive. The resource requirements increase in realistic settings where traces can be noisy, and countermeasures are active. In this work, we exploit mimicking to compress the learned models. We demonstrate up to 300 times compression of a state-of-the-art CNN. The mimic shallow network can also achieve much better accuracy as compared to when trained on original data and even reach the performance of a deeper network.@en

Machine learning algorithms fall prey to adversarial examples. As profiling side-channel attacks are seeing rapid adoption of machine learning-based approaches that can even defeat commonly used side-channel countermeasures, we investigate the potential of adversarial example as a defense mechanism. We show that adversarial examples have the potential to serve as a countermeasure against machine learning-based side-channel attacks. Further, we exploit the transferability property to show that a common adversarial example can act as a countermeasure against a range of machine learning-based side-channel classifiers.

@en

Profiled side-channel analysis based on deep learning, and more precisely Convolutional Neural Networks, is a paradigm showing significant potential. The results, although scarce for now, suggest that such techniques are even able to break cryptographic implementations protected with countermeasures. In this paper, we start by proposing a new Convolutional Neural Network instance able to reach high performance for a number of considered datasets. We compare our neural network with the one designed for a particular dataset with masking countermeasure and we show that both are good designs but also that neither can be considered as a superior to the other one.
Next, we address how the addition of artificial noise to the input signal can be actually beneficial to the performance of the neural network. Such noise addition is equivalent to the regularization term in the objective function. By using this technique, we are able to reduce the number of measurements needed to reveal the secret key by orders of magnitude for both neural networks. Our new convolutional neural network instance with added noise is able to break the implementation protected with the random delay countermeasure by using only 3 traces in the attack phase. To further strengthen our experimental results, we investigate the performance with a varying number of training samples, noise levels, and epochs. Our findings show that adding noise is beneficial throughout all training set sizes and epochs.
@en

Recently, the NIST launched a competition for lightweight cryptography and a large number of ciphers are expected to be studied and analyzed under this competition. Apart from the classical security, the candidates are desired to be analyzed against physical attacks. Differential Fault Analysis (DFA) is an invasive physical attack method for recovering key information from cipher implementations. Up to date, almost all the block ciphers have been shown to be vulnerable against DFA, while following similar attack patterns. However, so far researchers mostly focused on particular ciphers rather than cipher families, resulting in works that reuse the same idea for different ciphers. In this article, we aim at bridging this gap, by providing a generic DFA attack method targeting Substitution-Permutation Network (SPN) based families of symmetric block ciphers. We provide the overview of the state-of-the-art of the fault attacks on SPNs, followed by generalized conditions that hold on all the ciphers of this design family. We show that for any SPN, as long as the fault mask injected before a non-linear layer in the last round follows a non-uniform distribution, the key search space can always be reduced. This shows that it is not possible to design an SPN-based cipher that is completely secure against DFA, without randomization. Furthermore, we propose a novel approach to find good fault masks that can leak the key with a small number of instances. We then developed a tool, called Joint Difference Distribution Table (JDDT) for pre-computing the solutions for the fault equations, which allows us to recover the last round key with a very small number of pairs of faulty and non-faulty ciphertexts. We evaluate our methodology on various block ciphers, including PRESENT-80, PRESENT-128, GIFT-64, GIFT-128, AES-128, LED-64, LED-128, SKINNY-64-64, SKINNY-128-128, PRIDE and PRINCE. The developed technique would allow automated DFA analysis of several candidates in the NIST competition.

@en

The interplay between machine learning and security is becoming more prominent. New applications using machine learning also bring new security risks. Here, we show it is possible to reverse-engineer the inputs to a neural network with only a single-shot side-channel measurement assuming the attacker knows the neural network architecture being used.

@en

Machine learning has become mainstream across industries. Numerous examples prove the validity of it for security applications. In this work, we investigate how to reverse engineer a neural network by using side-channel information such as timing and electromagnetic (EM) emanations. To this end, we consider multilayer perceptron and convolutional neural networks as the machine learning architectures of choice and assume a non-invasive and passive attacker capable of measuring those kinds of leakages. We conduct all experiments on real data and commonly used neural network architectures in order to properly assess the applicability and extendability of those attacks. Practical results are shown on an ARM Cortex-M3 microcontroller, which is a platform often used in pervasive applications using neural networks such as wearables, surveillance cameras, etc. Our experiments show that a side-channel attacker is capable of obtaining the following information: the activation functions used in the architecture, the number of layers and neurons in the layers, the number of output classes, and weights in the neural network. Thus, the attacker can effectively reverse engineer the network using merely side-channel information such as timing or EM.@en

We concentrate on machine learning techniques used for profiled side-channel analysis in the presence of imbalanced data. Such scenarios are realistic and often occurring, for instance in the Hamming weight or Hamming distance leakage models. In order to deal with the imbalanced data, we use various balancing techniques and we show that most of them help in mounting successful attacks when the data is highly imbalanced. Especially, the results with the SMOTE technique are encouraging, since we observe some scenarios where it reduces the number of necessary measurements more than 8 times. Next, we provide extensive results on comparison of machine learning and side-channel metrics, where we show that machine learning metrics (and especially accuracy as the most often used one) can be extremely deceptive. This finding opens a need to revisit the previous works and their results in order to properly assess the performance of machine learning in side-channel analysis. @en

In this work, we ask a question whether Convolutional Neural Networks are more suitable for side-channel attacks than some other machine learning techniques and if yes, in what situations. Our results point that Convolutional Neural Networks indeed outperform machine learning in several scenarios when considering accuracy. Still, often there is no compelling reason to use such a complex technique. In fact, if comparing techniques without extra steps like preprocessing, we see an obvious advantage for Convolutional Neural Networks when the level of noise is small, and the number of measurements and features is high. The other tested settings show that simpler machine learning techniques, for a significantly lower computational cost, perform similarly or sometimes even better. The experiments with guessing entropy indicate that methods like Random Forest or XGBoost could perform better than Convolutional Neural Networks for the datasets we investigated.@en

Side-channel attacks are a real threat to many secure systems. In this paper, we consider two ciphers used in the automotive industry – AES and ChaCha20 and we evaluate their resistance against side-channel attacks. In particular, the focus is laid upon the main non-linear component in these ciphers. Owing to the design of ChaCha20, it offers natural timing side-channel resistance and thus is suitable for affected applications. However, attacks exploiting the power side-channel are somewhat more difficult on ChaCha20 as compared to AES, but the overhead to protect ChaCha20 against such attack is considerably higher.@en