To increase the open-circuit voltage in solar cells based on triple cation, mixed halide perovskites, reducing recombination processes at the interfaces with transport layers (TLs) is key. Here, we investigated the charge carrier dynamics in bilayers and trilayers of Cs_0.05MA_0.10FA_0.85Pb(I_0.97Br_0.03)₃ (CsMAFA) combined with TLs using time-resolved microwave conductance (TRMC) measurements without and with bias illumination (BI). In the bilayers, we find balanced mobilities for electrons and holes in CsMAFA and nearly quantitative carrier extraction. The small, rapidly decaying TRMC signals for n-i-p- and p-i-n triple layers indicate both carriers are extracted. Applying BI leads to the charging of the TLs and the corresponding electric field prevents additional charge extraction, which demonstrates long-lived charge separation over the CsMAFA/TLs. Most importantly, for all bilayer combinations showing long-lived charge separation, an increase of the quasi-Fermi level splitting with respect to that of the CsMAFA layer is found.

@en

Mixed Sn-Pb halide perovskites are promising absorber materials for solar cells due to the possibility of tuning the bandgap energy down to 1.2-1.3 eV. However, tin-containing perovskites are susceptible to oxidation affecting the optoelectronic properties. In this work, we investigated qualitatively and quantitatively metastable oxygen-induced doping in isolated ASn_xPb_1-xI₃ (where A is methylammonium or a mixture of formamidinium and cesium) perovskite thin films by means of microwave conductivity, structural and optical characterization techniques. We observe that longer oxygen exposure times lead to progressively higher dark conductivities, which slowly decay back to their original levels over days. Here oxygen acts as an electron acceptor, leading to tin oxidation from Sn²⁺ to Sn⁴⁺ and creation of free holes. The metastable oxygen-induced doping is enhanced by exposing the perovskite simultaneously to oxygen and light. Next, we show that doping not only leads to the reduction in the photoconductivity signal but also induces long-term effects even after loss of doping, which is thought to derive from consecutive oxidation reactions leading to the formation of defect states. On prolonged exposure to oxygen and light, optical and structural changes can be observed and related to the formation of SnO_x and loss of iodide near the surface. Our work highlights that even a short-term exposure to oxygen immediately impairs the charge carrier dynamics of the perovskite, while structural perovskite degradation is only noticeable upon long-term exposure and accumulation of oxidation products. Hence, for efficient solar cells, exposure of mixed Sn-Pb perovskites to oxygen during production and operation should be rigorously blocked.

@en

Indium phosphide (InP) quantum dots (QDs) are considered the most promising alternative for Cd and Pb-based QDs for lighting and display applications. However, while core-only QDs of CdSe and CdTe have been prepared with near-unity photoluminescence quantum yield (PLQY), this is not yet achieved for InP QDs. Treatments with HF have been used to boost the PLQY of InP core-only QDs up to 85%. However, HF etches the QDs, causing loss of material and broadening of the optical features. Here, we present a simple postsynthesis HF-free treatment that is based on passivating the surface of the InP QDs with InF_3. For optimized conditions, this results in a PLQY as high as 93% and nearly monoexponential photoluminescence decay. Etching of the particle surface is entirely avoided if the treatment is performed under stringent acid-free conditions. We show that this treatment is applicable to InP QDs with various sizes and InP QDs obtained via different synthesis routes. The optical properties of the resulting core-only InP QDs are on par with InP/ZnSe/ZnS core-shell QDs, with significantly higher absorption coefficients in the blue, and with potential for faster charge transport. These are important advantages when considering InP QDs for use in micro-LEDs or photodetectors.

@en

Additives are commonly used to increase the performance of metal-halide perovskite solar cells, but detailed information on the origin of the beneficial outcome is often lacking. Herein, the effect of glycine hydrochloride is investigated when used as an additive during solution processing of narrow-bandgap mixed Pb–Sn perovskites. By combining the characterization of the photovoltaic performance and stability under illumination, with determining the quasi-Fermi level splitting, time-resolved microwave conductivity (TRMC), and morphological and elemental analysis a comprehensive insight is obtained. Glycine hydrochloride is able to retard the oxidation of Sn2+ in the precursor solution, and at low concentrations (1–2 mol%) it improves the grain size distribution and crystallization of the perovskite, causing a smoother and more compact layer, reducing non-radiative recombination, and enhancing the lifetime of photogenerated charges. These improve the photovoltaic performance and have a positive effect on stability. By determining the quasi-Fermi level splitting on perovskite layers without and with charge transport layers it is found that glycine hydrochloride primarily improves the bulk of the perovskite layer and does not contribute significantly to passivation of the interfaces of the perovskite with either the hole or electron transport layer (ETL).@en

Indium phosphide colloidal quantum dots (CQDs) are the main alternative for toxic and restricted Cd based CQDs for lighting and display applications. Here we systematically report on the size-dependent optical absorption, ensemble, and single particle photoluminescence (PL) and biexciton lifetimes of core-only InP CQDs. This systematic study is enabled by improvements in the synthesis of InP CQDs to yield a broad size series of monodisperse core-only InP CQDs with narrow absorption and PL line width and significant PL quantum yield.

@en