The optoelectronic properties of colloidal quantum dots (cQDs) depend critically on the absolute energy of the conduction and valence band edges. It is well known these band-edge energies are sensitive to the ligands on the cQD surface, but it is much less clear how they depend on other experimental conditions, like solvation. Here, we experimentally determine the band-edge positions of thin films of PbS and ZnO cQDs via spectroelectrochemical measurements. To achieve this, we first carefully evaluate and optimize the electrochemical injection of electrons and holes into PbS cQDs. This results in electrochemically fully reversible electron injection with >8 electrons per PbS cQDs, allowing the quantitative determination of the conduction band energy for PbS cQDs with various diameters and surface compositions. Surprisingly, we find that the band-edge energies shift by nearly 1 eV in the presence of different solvents, a result that also holds true for ZnO cQDs. We argue that complexation and partial charge transfer between solvent and surface ions are responsible for this large effect of the solvent on the band-edge energy. The trend in the energy shift matches the results of density functional theory (DFT) calculations in explicit solvents and scales with the energy of complexation between surface cations and solvents. As a first approximation, the solvent Lewis basicity can be used as a good descriptor to predict the shift of the conduction and valence band edges of solvated cQDs.

Lead halide perovskites have attracted significant attention for their wide-ranging applications in optoelectronic devices. A ubiquitous element in these applications is that charging of the perovskite is involved, which can trigger electrochemical degradation reactions. Understanding the underlying factors governing these degradation processes is crucial for improving the stability of perovskite-based devices. For bulk semiconductors, the electrochemical decomposition potentials depend on the stabilization of atoms in the lattice-a parameter linked to the material’s solubility. For perovskite nanocrystals (NCs), electrochemical surface reactions are strongly influenced by the binding equilibrium of passivating ligands. Here, we report a spectro-electrochemical study on CsPbBr₃ NCs and bulk thin films in contact with various electrolytes, aimed at understanding the factors that control cathodic degradation. These measurements reveal that the cathodic decomposition of NCs is primarily determined by the solubility of surface ligands, with diminished cathodic degradation for NCs in high-polarity electrolyte solvents where ligand solubilities are lower. However, the solubility of the surface ligands and bulk lattice of NCs are orthogonal, such that no electrolyte could be identified where both the surface and bulk are stabilized against cathodic decomposition. This poses inherent challenges for electrochemical applications: (i) The electrochemical stability window of CsPbBr₃ NCs is constrained by the reduction potential of dissolved Pb²⁺ complexes, and (ii) cathodic decomposition occurs well before the conduction band can be populated with electrons. Our findings provide insights to enhance the electrochemical stability of perovskite thin films and NCs, emphasizing the importance of a combined selection of surface passivation and electrolyte.

Indium phosphide (InP) quantum dots (QDs) are considered the most promising alternative for Cd and Pb-based QDs for lighting and display applications. However, while core-only QDs of CdSe and CdTe have been prepared with near-unity photoluminescence quantum yield (PLQY), this is not yet achieved for InP QDs. Treatments with HF have been used to boost the PLQY of InP core-only QDs up to 85%. However, HF etches the QDs, causing loss of material and broadening of the optical features. Here, we present a simple postsynthesis HF-free treatment that is based on passivating the surface of the InP QDs with InF_3. For optimized conditions, this results in a PLQY as high as 93% and nearly monoexponential photoluminescence decay. Etching of the particle surface is entirely avoided if the treatment is performed under stringent acid-free conditions. We show that this treatment is applicable to InP QDs with various sizes and InP QDs obtained via different synthesis routes. The optical properties of the resulting core-only InP QDs are on par with InP/ZnSe/ZnS core-shell QDs, with significantly higher absorption coefficients in the blue, and with potential for faster charge transport. These are important advantages when considering InP QDs for use in micro-LEDs or photodetectors.

Electrochemical charging of nanocrystal films opens up new possibilities for designing quantum dot-based device structures, but a solid theoretical framework of this process and its limitations is lacking. In this work, drift-diffusion simulations are employed to model the charging of nanocrystal films and gain insight into the electrochemical doping process. Through steady state simulations it is shown that the Fermi level and doping density in the nanocrystal film depend on the concentration of the electrolyte in addition to the value of the applied potential. Time-resolved simulations reveal that charging is often limited by transport of electrolyte ions. However, ion transport in the film is dominated by drift, rather than diffusion, and the concentration profile of ions differs substantially from concentration profiles of diffusing redox species at flat electrodes. Classical electrochemical theory cannot be used to model this type of mass transport limited behavior in films of nanocrystals, so a new model is developed. We show that the Randles-Ševčík equation, which is derived for electrochemical species diffusing in solution, but is often applied to films as well, results in a significant underestimation of the diffusion coefficients of the charge compensating electrolyte ions.

We present a strategy to actively engineer long-range charge transport in colloidal quantum dot assemblies by using ligand functionalities that introduce electronic states and provide a path for carrier transfer. This is a shift away from the use of inactive spacers to modulate charge transport through the lowering of the tunneling barrier for interparticle carrier transfer. This is accomplished with the use of electronically coupled redox ligands by which a self-exchange chain reaction takes place and long-range charge transport is enabled across the film. We identified the different modes of charge transport in these quantum dot/redox ligand assemblies, their energetic position and kinetics, and explain how to rationally manipulate them through modulation of the Fermi level and redox ligand coverage.