This paper presents a complete 200Gb/s PAM-4 transmitter (TX) in 28nm CMOS technology. The transmitter features a hybrid sub-sampling PLL (SSPLL) with a delta-sigma (?S) modulator, clock distribution network with flexible timing control, and data path with a hybrid 5-tap Feed-Forward Equalizer (FFE) and T-coil for bandwidth extension. The prototype chip achieves 4.69 pJ/bit efficiency, 54mV eye height, 0.27UI eye width, and 97% RLM under -6dB channel loss at 50GHz.

@en

We present a ring-oscillator-based sub-sampling phase-locked loop (PLL) using a generator-based design flow. A hybrid loop with a delta-sigma ($\Delta \Sigma$) modulator is applied to reduce the loop filter (LF) area and the control ripple. The generator automatically produces the ring oscillator and PLL to meet the provided specifications. The 10-GHz PLL instance implemented in 28-nm planar process achieves RMS jitter of}299.5 fs and power of 9.9 mW from a 1-V supply.@en

This article presents a 200-Gb/s pulse amplitude-modulation four-level (PAM-4) and 100-Gb/s non-return-to-zero (NRZ) transmitter (TX) in 28-nm CMOS technology. To achieve the target data rate, the output bandwidth and swing of the proposed TX are optimized by minimizing the output capacitance of the 4:1 multiplexer (MUX) and driver stage with pull-up current sources and adopting a fully reconfigurable 5-tap feed-forward equalizer (FFE). The key circuit includes a segmented 8:4 MUX and 4:1 MUX/driver, a thermal encoder and retimer, and a flexible clock distribution network. Using the layout generated with Berkeley Analog Generator (BAG), the proposed TX achieves an eye opening with >52.9-mV eye height, 0.36 UI eye width, >98% RLM, and 4.63 pJ/b at 200-Gb/s PAM-4 signaling under >6-dB channel loss at 50 GHz, demonstrating the highest data rate achieved using a planar process.

@en

We present a bang-bang phase-locked loop (PLL) generator that encapsulates design methodologies for its circuit blocks and the complete PLL system. The generator is fully automated and parameterized, producing the layout and schematic based on process characterization and top-level specifications. Three 14GHz PLLs are instantiated in TSMC 16nm, GF 14nm and Intel 22nm technologies, demonstrating the process portability. The rapid generation time of less than four days enables fast PLL design and technology porting. The PLL design fabricated in TSMC 16nm shows RMS jitter of 565.4fs and power of 6.64mW from a 0.9V supply.@en