Dust storms pose significant risks to health and property, necessitating accurate forecasting for preventive measures. Despite advancements, dust models grapple with uncertainties arising from emission and transport processes. Data assimilation addresses these by integrating observations to rectify model error, enhancing forecast precision. The ensemble Kalman filter (EnKF) is a widely used assimilation algorithm that effectively optimize model states, particularly in terms of intensity adjustment. However, the EnKF's efficacy is challenged by position errors between modeled and observed dust features, especially under substantial position errors. This study introduces the valid time shifting ensemble Kalman filter (VTS-EnKF), which combines stochastic EnKF with a valid time shifting mechanism. By recruiting additional ensemble members from neighboring valid times, this method not only accommodates variations in dust load but also explicitly accounts for positional uncertainties. Consequently, the enlarged ensemble better represents both the intensity and positional errors, thereby optimizing the utilization of observational data. The proposed VTS-EnKF was evaluated against two severe dust storm cases from spring 2021, demonstrating that position errors notably deteriorated forecast performance in terms of root mean square error (RMSE) and normalized mean bias (NMB), impeding the EnKF's effective assimilation. Conversely, the VTS-EnKF improved both the analysis and forecast accuracy compared to the conventional EnKF. Additionally, to provide a more rigorous assessment of its performance, experiments were conducted using fewer ensemble members and different time intervals.@en

Atmospheric ammonia has been hazardous to the environment and human health for decades. Current inventories are usually constructed in a bottom-up manner and subject to uncertainties and incapable of reproducing the spatiotemporal characteristics of ammonia emission. Satellite measurements, for example, Infrared Atmospheric Sounder Interferometer (IASI) and Cross-Track Infrared Sounder, which provide global coverage of ammonia distribution, have gained popularity in ammonia emission estimation through data assimilation methods. However, satellite-based emission inversion studies on China are limited. In this study, we propose a four-dimensional ensemble variational-based ammonia emission inversion system to optimize ammonia emissions in China. It was developed by assimilating the IASI ammonia retrievals onboard Meteorological Operational satellite A and B into a chemical transport model Goddard Earth Observing System Chemical model (GEOS-Chem). Monthly inversion experiments were conducted in April, July, and October 2016 to test the performance. The inversion result indicated that the prior inventory from the MEIC model captured ammonia spreads in general; however, it heterogeneously underrated the emission intensity. The increments obtained in the assimilation were as high as 50% in North, East, and Northwest China. The posterior emission inventory presented a regional emission flux consistent with relevant studies. Driven by the optimized source estimate, GEOS-Chem provides superior results than using the prior in the evaluation of the assimilated IASI retrievals and the surface ammonia concentration measured by the ground-based Ammonia Monitoring Network in China.

@en

Statistical methods, particularly machine learning models, have gained significant popularity in air quality predictions. These prediction models are commonly trained using the historical measurement datasets independently collected at the environmental monitoring stations and their operational forecasts in advance using inputs of the real-time ambient pollutant observations. Therefore, these high-quality machine learning models only provide site-available predictions and cannot solely be used as the operational forecast. In contrast, deterministic chemical transport models (CTMs), which simulate the full life cycles of air pollutants, provide predictions that are continuous in the 3D field. Despite their benefits, CTM predictions are typically biased, particularly on a fine scale, owing to the complex error sources due to the emission, transport, and removal of pollutants. In this study, we proposed a fusion of site-available machine learning prediction, which is from our regional feature selection-based machine learning model (RFSML v1.0), and a CTM prediction. Compared to the normal pure machine learning model, the fusion system provides a gridded prediction with relatively high accuracy. The prediction fusion was conducted using the Bayesian-theory-based ensemble Kalman filter (EnKF). Background error covariance was an essential part in the assimilation process. Ensemble CTM predictions driven by the perturbed emission inventories were initially used for representing their spatial covariance statistics, which could resolve the main part of the CTM error. In addition, a covariance inflation algorithm was designed to amplify the ensemble perturbations to account for other model errors next to the uncertainty in emission inputs. Model evaluation tests were conducted based on independent measurements. Our EnKF-based prediction fusion presented superior performance compared to the pure CTM. Moreover, covariance inflation further enhanced the fused prediction, particularly in cases of severe underestimation.@en

Last spring, super dust storms reappeared in East Asia after being absent for one and a half decades. The event caused enormous losses in both Mongolia and China. Accurate simulation of such super sandstorms is valuable for the quantification of health damage, aviation risks, and profound impacts on the Earth system, but also to reveal the climatic driving force and the process of desertification. However, accurate simulation of dust life cycles is challenging, mainly due to imperfect knowledge of emissions. In this study, the emissions that lead to the 2021 spring dust storms are estimated through assimilation of MODIS AOD and ground-based PM10 concentration data simultaneously. With this, the dust concentrations during these super storms could be reproduced and validated with concentration observations. The multi-observation assimilation is also compared against emission inversion that assimilates AOD or PM10 concentration measurements alone, and the added values are analyzed. The emission inversion results reveal that wind-blown dust emissions originated from both China and Mongolia during spring 2021. Specifically, 19.9×106 and 37.5×106ĝ€¯t of particles were released in the Chinese and Mongolian Gobi, respectively, during these severe dust events. By source apportionment it was revealed that the Mongolian Gobi poses more severe threats to the densely populated regions of the Fenwei Plain (FWP) and the North China Plain (NCP) located in northern China than does the Chinese Gobi. It was estimated that 63ĝ€¯% of the dust deposited in FWP was due to transnational transport from Mongolia. For NCP, the long-distance transport dust from Mongolia contributes about 69ĝ€¯% to the dust deposition.

@en

Two-dimensional magnetic materials with strong magnetostriction are attractive systems for realizing strain-tuning of the magnetization in spintronic and nanomagnetic devices. This requires an understanding of the magneto-mechanical coupling in these materials. In this work, we suspend thin Cr₂Ge₂Te₆ layers and their heterostructures, creating ferromagnetic nanomechanical membrane resonators. We probe their mechanical and magnetic properties as a function of temperature and strain by observing magneto-elastic signatures in the temperature-dependent resonance frequency near the Curie temperature, T_C. We compensate for the negative thermal expansion coefficient of Cr₂Ge₂Te₆ by fabricating heterostructures with thin layers of WSe₂ and antiferromagnetic FePS₃, which have positive thermal expansion coefficients. Thus we demonstrate the possibility of probing multiple magnetic phase transitions in a single heterostructure. Finally, we demonstrate a strain-induced enhancement of T_C in a suspended Cr₂Ge₂Te₆-based heterostructure by 2.5 ± 0.6 K by applying a strain of 0.026% via electrostatic force.

@en

Aerosol optical depths (AODs) from the new Himawari-8 satellite instrument have been assimilated in a dust simulation model over East Asia. This advanced geostationary instrument is capable of monitoring the East Asian dust storms which usually have great spatial and temporal variability. The quality of the data has been verified through a comparison with AErosol RObotic NETwork AODs. This study focuses on extreme dust events only when dust aerosols are dominant; promising results are obtained in AOD assimilation experiments during a case in May 2017. The dust emission fields that drive the simulation model are strongly improved by the inverse modeling, and consequently, the simulated dust concentrations are in better agreements with the observed AOD as well as ground-based observations of PM ₁₀ . However, some satellite AODs show significant inconsistence with the simulations and the PM ₁₀ and AErosol RObotic NETwork observations, which might arise from retrieval errors over a partially clouded scene. The data assimilation procedure therefore includes a screening method to exclude these observations in order to avoid unrealistic results. A dust mask screening method is designed, which is based on selecting only those observations where the deterministic model produces a substantial amount of dust. This screen algorithm is tested to give more accurate result compared to the traditional method based on background covariance in the case study. Note that our screen method would exclude valuable information in case the model is not able to simulate the dust plume shape correctly; hence, applications in related studies require inspections of simulations and observations by user.

@en

Visibility forecast is a meteorological problems which has direct impact to daily lives. For instance, timely prediction of low visibility situations is very important for the safe operation in airports and highways. In this paper, we investigate the use of Long Short-Term Memory(LSTM) model to predict visibility. By adjusting the loss function and network structure, we optimize the original LSTM model to make it more suitable for practical applications, which is superior to previous models in short-term low visibility prediction. In addition, there is a”time delay problem” when the number of hours time ahead we try to forecast becomes larger, this problem is persistent given the limited amount of available training data. We report our attempt of applying re-sampling to deal with the time delay problem, and we find that this method can improve the accuracy of visibility prediction, especially for the low visibility case.

@en