Tropical Cyclones (TCs) are singular storms causing intense wind, large waves, extreme water levels, and heavy rainfall. TCs prove every year to be one of the most destructive natural phenomena worldwide. The quantitative assessment of the hazards resulting from TCs (i.e., flooding and extreme winds) is challenging since satellite data are only available for recent decades, whereas older historical observations are incomplete and less accurate. In addition, long-term prediction through numerical weather forecasting is still limited. This often results in large uncertainties in the definition of TC hazards associated with events with longer return periods or in areas infrequently impacted by TCs. Even when this information is available, for example through statistical sampling of synthetic TC tracks, the numerical modelling of the associated hazards for all the different TC conditions can lead to computational costs which are often infeasible. Several methodologies that overcome the issues of accuracy and computational efficiency currently exist, but these are not generically applicable, and they tend to focus on specific areas only, for example where TCs typically make landfall. The main contribution of this paper is a novel methodology for the estimation and analysis of TC hydro-meteorological conditions and induced hazards. The method is generically applicable and maximizes accuracy while accounting for computational efficiency. Our approach identifies a smaller but representative set of TC tracks (RTCs) that preserves the information about extremes and the frequency of events of the larger population. The method is successfully applied and validated in a case study in the Bay of Bengal, using a set of synthetic TC tracks representing 1000 years of TC climate. For the best-performing configuration, the required number of scenarios and associated computational costs were reduced by 90% while maintaining accuracy in the simulated offshore storm surges, significant wave height, and windspeeds typically within 10% of the prediction based on the original full set of scenarios. This method is globally applicable and greatly improves the efficiency of TC-related hazard estimation, making it particularly valuable for areas with limited historical data.

Sandy beaches and dune systems have high recreational and ecological value, and they offer protection against flooding during storms. At the same time, these systems are very vulnerable to storm impacts. Process-based numerical models are presently used to assess the morphological changes of dune and beach systems during storms. However, such models come with high computational costs, hindering their use in real-life applications which demand many simulations and/or involve a large spatial-temporal domain. Here we design a novel meta-model to predict dune erosion volume (DEV) at the Dutch coast, based on artificial neural networks (ANNs), trained with cases from process-based modeling. First, we reduce an initial database of 1/41400 observed sandy profiles along the Dutch coastline to 100 representative typological coastal profiles (TCPs). Next, we synthesize a set of plausible extreme storm events, which reproduces the probability distributions and statistical dependencies of offshore wave and water level records. We choose 100 of these events to simulate the dune response of the 100 TCPs using the process-based model XBeach, resulting in 10 000 cases. Using these cases as training data, we design a two-phase meta-model, comprised of a classifying ANN (which predicts the occurrence (or not) of erosion) and a regression ANN (which gives a DEV prediction). Validation against a benchmark dataset created with XBeach and a sparse set of available dune erosion observations shows high prediction skill with a skill score of 0.82. The meta-model can predict post-storm DEV 103-104 times faster (depending on the duration of the storm) than running XBeach. Hence, this model may be integrated in early warning systems or allow coastal engineers and managers to upscale storm forcing to dune response investigations to large coastal areas with relative ease.

Dune erosion driven by extreme marine storms can damage local infrastructure or ecosystems and affect the long-term flood safety of the hinterland. These storms typically affect long stretches (∼100 km) of sandy coastlines with variable topo-bathymetries. The large spatial scale makes it computationally challenging for process-based morphological models to be used for predicting dune erosion in early warning systems or probabilistic assessments. To alleviate this, we take a first step to enable efficient estimation of dune erosion using the Dutch coast as a case study, due to the availability of a large topo-bathymetric dataset. Using clustering techniques, we reduce 1,430 elevation profiles in this dataset to a set of typological coastal profiles (TCPs), that can be employed to represent dune erosion dynamics along the whole coast. To do so, we use the topo-bathymetric profiles and historic offshore wave and water level conditions, along with simulations of dune erosion for a number of representative storms to characterize each profile. First, we identify the most important drivers of dune erosion variability at the Dutch coast, which are identified as the pre-storm beach geometry, nearshore slope, tidal level and profile orientation. Then using clustering methods, we produce various sets of TCPs, and we test how well they represent dune morphodynamics by cross-validation on the basis of a benchmark set of dune erosion simulations. We find good prediction skill (0.83) with 100 TCPs, representing a 93% input and associated computational costs reduction. These TCPs can be used in a probabilistic model forced with a range of offshore storm conditions, enabling national scale coastal risk assessments. Additionally, the presented techniques could be used in a global context, utilizing elevation data from diverse sandy coastlines to obtain a first order prediction of dune erosion around the world.

Considering the likely increase in coastal flooding in small island developing states (SIDSs) due to climate change, coastal managers at the local and global levels have been developing initiatives aimed at implementing disaster risk reduction (DRR) and adaptation measures. Developing science-based adaptation policies requires accurate coastal flood risk (CFR) assessments, which in the case of insular states are often subject to input uncertainty. We analysed the impact of a number of uncertain inputs on coastal flood damage estimates: (i) significant wave height, (ii) storm surge level and (iii) sea level rise (SLR) contributions to extreme sea levels, as well as the error-driven uncertainty in (iv) bathymetric and (v) topographic datasets, (vi) damage models, and (vii) socioeconomic changes. The methodology was tested through a sensitivity analysis using an ensemble of hydrodynamic models (XBeach and SFINCS) coupled with a direct impact model (Delft-FIAT) for a case study of a number of villages on the islands of São Tomé and Príncipe. Model results indicate that for the current time horizon, depth damage functions (DDFs) and digital elevation models (DEMs) dominate the overall damage estimation uncertainty. When introducing climate and socioeconomic uncertainties to the analysis, SLR projections become the most relevant input for the year 2100 (followed by DEM and DDF). In general, the scarcity of reliable input data leads to considerable predictive uncertainty in CFR assessments in SIDSs. The findings of this research can help to prioritize the allocation of limited resources towards the acquisitions of the most relevant input data for reliable impact estimation.

Diamantidou, E.; Santinelli, G.; Giardino, A.; Stronkhorst, J., and de Vries, S., 2020. An automatic procedure for dune foot position detection: Application to the Dutch coast. Journal of Coastal Research, 36(3), 668-675. Coconut Creek (Florida), ISSN 0749-0208. Coastal indicators are a useful proxy in coastal zone management to describe the status of a physical system and to assess the effectiveness of possible interventions. They can be used as a basis to implement and evaluate coastal erosion policies, as it is done, for example, in The Netherlands. One often used coastal indicator is the position of the dune foot. In the current definition used in The Netherlands to describe the dune foot position, the actual geometry of the profile is, however, not accounted for, but this is simply based on one reference value for the entire coastline. In the present study, an automatic procedure for the detection of the dune foot position is proposed based on the actual shape of the cross-shore profile and on the evaluation of the first and second derivatives of the cross-shore topography. The methodology is compared to visual observations as well as satellite images for case studies in The Netherlands and Portugal, hence showing that the methodology is generally applicable. The algorithm to derive the dune foot position in a cross-shore profile and the database derived from this study are publicly available.

This paper presents an application of the Bayesian belief network for coastal erosion management at the regional scale. A "Bayesian erosion management network" (BERM-N) is developed and trained based on yearly cross-shore profile data available along the Holland coast. Profiles collected for over 50 years and at 604 locations were combined with information on different sand nourishment types (i.e., beach, dune, and shoreface) and volumes implemented during the analyzed time period. The network was used to assess the effectiveness of nourishments in mitigating coastal erosion. The effectiveness of nourishments was verified using two coastal state indicators, namely the momentary coastline position and the dune foot position. The network shows how the current nourishment policy is effective in mitigating the past erosive trends. While the effect of beach nourishment was immediately visible after implementation, the effect of shoreface nourishment reached its maximum only 5-10 years after implementation of the nourishments. The network can also be used as a predictive tool to estimate the required nourishment volume in order to achieve a predefined coastal erosion management objective. The network is interactive and flexible and can be trained with any data type derived from measurements as well as numerical models.