A 3D unsteady RANS simulation utilizing the Spalart-Allmaras (SA) turbulence model was conducted to investigate aerodynamic interactions within a propeller-wing-flap system. The research specifically examines the complex flow field around a slotted flap, highlighting the interaction between the propeller slipstream and the main wing and flap during powered high-lift conditions. Operating conditions include a chord-based Reynolds number of 2 million, with thrust and flap settings reflecting take-off conditions (propeller advance ration of 0.765, thrust coefficient of 1.267, flap deflection angle of 15 deg) at an angle of attack of 8.3 deg. Chordwise pressure distributions and surface shear stress contours show strong agreement with previous experimental measurements and oil flow visualizations of the same geometry. Findings indicate that a portion of the propeller slipstream transfers from the pressure side of the main wing to the upper side of the flap through the cove, dominating the flap flow field. Although the upper side of the main wing experiences fluctuating flow originating from the propeller slipstream, this flow does not induce unsteadiness or penetrate the flap upper side boundary layer along the wing span. Furthermore, it is shown that the shedding of vortices from the propeller root, along with the resulting vortices on the lower side of the geometry, weakens the flap boundary layer as this flow is transferred through the cove area, consequently inducing flap flow separation. Overall, the findings provide valuable insights into propeller-wing-flap interactions, which had not been visualized before in this detail, yet emphasizing the need for further research to confirm and expand on these results.@en

Propeller–wing–flap systems are subject to complex aerodynamic interactions between each part of the system. Although the propeller–wing interaction in cruise conditions is well defined, the high-lift condition is relatively unexplored. Effective analysis of the complex aerodynamic relationship between propeller, wing, and flap is being impeded by a lack of understanding of the underlying mechanisms. In this paper, we therefore investigate the effects of a 2D jet impinging on a multisection airfoil. We quantify which factors that define a jet–wing–flap configuration dominate lift, drag, and moment responses. We further investigate interactions between these factors and discuss how they affect the flow. We find that the jet velocity ratio is by far the dominant factor in lift, drag, and moment responses, but it does not have strong interactions with other factors. The sensitivities of the multi-element airfoil do not change significantly when impinged upon by a jet, except when critical Mach numbers are exceeded. This strongly affects the aerodynamic response and dominant sensitivities. We furthermore conclude that the immersion of the flap is a key aspect when it comes to augmenting the lift by increasing the dynamic pressure in the flowfield. The conclusions from this paper can provide key insights for propeller–wing–flap flows.@en

This study investigates the acoustic characteristics of a distributed propeller-wing system in a tractor configuration, focusing on the potential for noise reduction using the synchrophasing technique. The experimental setup features three propellers with nacelles mounted side-by-side on the leading edge of a wing, resulting in aerodynamic interference between adjacent propellers due to a tip clearance of 5% of the radius. The study investigates the acoustic impact of varying relative blade-phase angles (synchrophasing) and further explores the implications of changing the angle of attack. The findings show that synchrophasing influences noise emissions at the locations investigated, potentially amplifying or reducing noise relative to a random configuration. Moreover, these effects persist when investigating higher angles of attack. @en

The integration of distributed electric propeller systems on aircraft wings presents complex aerodynamic interactions that are not yet fully understood. This study investigates the slipstream deformation in a distributed propeller configuration and compares it with a single propeller setup, visualised by experimental measurements of total pressure in the wake. Furthermore, we investigate the effects of relative blade phase angle on the resulting deformation. Overall, we identify several phenomena in distributed propeller-wing aerodynamic interaction that warrant attention in future research.@en

The recent increased interest in distributed propulsion and electric vertical take-off and landing vehicles have made propeller wake interactions with the aircraft more relevant. The interaction between high-lift wings and propeller slipstreams are still not fully understood and several research efforts are being carried out to improve that knowledge. Lattice-Boltzmann, very large eddy simulations of a propeller-wing-flap configuration are conducted in this work. The simulations are validated with experimental data, with very good agreement of surface static pressure, surface shearlines, and wake total pressure. The complex separation patterns on the flap and their interaction with the slipstream of the propeller are well captured. The effects of grid resolution and laminar-to-turbulent transition are demonstrated. With the simulations validated, they are used to better understand the flow field of this configuration. We find that the angle of attack has a strong effect on how the slipstream is split over the wing, that the tip vortices wrap around the wing leading-edge instead of being cut by it, and that increased circulation stabilizes the tip vortices on the suction side, while making the tip vortices on the pressure side more unstable.@en

Experiments were performed using a wall-to-wall unswept and untapered wing with a single slotted flap and a propeller, to obtain a validation dataset and gain insight into primary flow phenomena in propeller-wing-flap interactions. Measurements were taken using pressure taps, a wake rake and oil flow visualization, for several flap deflections (0, 15 and 30 degrees) and thrust settings (unpowered, J = 0.8 / T _c = 1.05 and J = 1.0 / T _c = 0.45). Similarity of the measured data to similar experiments was poor, which was believed to be due to the low Reynolds number of Re = 6e5 and sensitivity of local measurements due to occurrence of stall cells. Oil flow visualizations showed significant induction of flow separation from nacelle-wing interactions in unpowered conditions, traced to boundary layer growth. For powered cases it was shown that both sides of the deployed flap are immersed in the part of the slipstream that passes the pressure side of the main element. This part of the slipstream deforms significantly before it reaches the flap and thus results in complex spanwise variations for the flap flow. This stresses the need to investigate slipstream development in propeller-wing-flap systems and the effects on flap flow specifically to gain in-depth understanding of the interactions. The results presented in this paper expose the inherent complexity of investigating propeller-wing-flap systems and gaining viable validation data, and might serve to guide for future investigations of propeller-wing-flap systems.

@en

The use of formation flight to achieve aerodynamic benefit applied to rotorcraft has, unlike its fixed-wing counterpart, received little attention in the literature. This document presents a proof-of-concept of rotorcraft formation flight from two independent investigations: a numerical study of a fully articulated helicopter influenced by an upstream helicopter wake and a wind-tunnel experiment featuring two small-scale helicopter models with fixed-pitch blades. Both cases feature a representation of two helicopters in a diagonal, staggered formation aligned on the advancing side of the main rotor, but do not simulate directly comparable flight conditions. The vertical and lateral alignment of the two helicopters is varied in order to observe the achievable reductions in main rotor power required during cruise flight. The wind-tunnel experiment data yield an estimated maximum total power reduction for the secondary aircraft of approximately 24%, while the numerical models yield reductions between 20% and 34% dependent on flight velocity. Both experiments predict a higher potential for aerodynamic benefit than generally observed for fixed-wing formations, which is attributed to the asymmetric velocity profile induced by the wake of the upstream rotor. Optimal lateral alignment of both experimental and numerical results is found to feature overlap of the rotor disk areas, rather than tip-to-tip alignment, as a result of the circular rotor disk area. Experimental data show an optimal vertical alignment of the secondary rotorcraft below the primary, due to the self-induced vertical displacement of the rotor wake, which is absent from the numerical results due to the application of a flat wake assumption. The results show a promising potential for rotorcraft formation flight, though due to the limited nature of the models used, conclusions cannot be generalized. The potential aerodynamic benefit indicated by the present study invites further research in the field of rotorcraft formation flight.

@en

The use of formation flight to achieve aerodynamic benefit as applied to rotorcraft is, unlike its fixed-wing counterpart, an unproven principle. This document presents a proof-of-concept of rotorcraft formation flight through a numerical research study, supported by results from an independent wind-tunnel experiment. In both cases, two helicopters are placed in an echelon formation aligned on the advancing side of the main rotor, though they do not simulate directly comparable flight conditions. The vertical and lateral alignment is varied in order to observe the achievable reductions in main rotor power required during cruise flight. The wind-tunnel experiment data yields an estimated maximum total power reduction for the secondary aircraft of 24%, while the numerical models yield reductions between 20% and 34% dependent on flight velocity. Both experiments predict a higher potential for aerodynamic benefit than observed for fixed-wing formations, which is contributed to the asymmetric upwash profile in the rotor wake. Optimal lateral alignment of both experimental and numerical results is found to feature overlap of the rotor disk areas due to circular area effects. Experimental data shows an optimal vertical alignment of the secondary rotorcraft below the primary, due to wake displacement. This is not present in the numerical simulations as a result of the applied leader wake modeling.

@en