In this paper, we present a novel Kalman filter approach to combine a hydrodynamic model-derived lowest astronomical tide (LAT) surface with tide gauge record-derived LAT values. In the approach, tidal water levels are assimilated into the model. As such, the combination is guided by the model physics. When validating the obtained “Kalman-filtered LAT realization” at all tide gauges, we obtained an overall root-mean-square (RMS) difference of 15.1 cm. At the tide gauges not used in the data assimilation, the RMS is 17.9 cm. We found that the assimilation reduces the overall RMS difference by ∼31% and ∼22%, respectively. In the Dutch North Sea and Wadden Sea, the RMS differences are 6.6 and 14.8 cm (all tide gauges), respectively. Furthermore, we address the problem of LAT realization in intertidal waters where LAT is not defined. We propose to replace LAT by pseudo-LAT, which we suggest to realize similarly as LAT except that all water level boundary conditions and assimilated tidal water levels have to be enlarged by a constant value that is removed afterwards. Using this approach, we obtained a smooth reference surface for the Dutch Wadden Sea that fits LAT at the North Sea boundary within a few centimeters.@en

This paper presents a simple method for estimating the impact of assimilating individual or group of observations on forecast accuracy improvement. This method is derived from the nsemble-based observation impact analysis method of Liu and Kalnay (Q J R Meteorol Soc 134:1327–1335, 2008). The method described here is different in two ways from their method. Firstly, it uses a quadratic function of model-minus-observation residuals as a measure of forecast accuracy, instead of model-minus-analysis. Secondly, it simply makes use of time series of observations and the corresponding model output generated without data assimilation. These time series are usually available in an operational database. Hence, it is simple to implement. It can be used before any data assimilation is implemented. Therefore, it is useful as a design tool of a data assimilation system, namely for selecting which observations to assimilate. The method can also be used as a diagnostic tool, for example, to assess if all observation contributes positively to the accuracy improvement. The method is applicable for systems with stationary error process and fixed observing network. Using twin experiments with a simple one-dimensional advection model, the method is shown to work perfectly in an idealized situation. The method is used to evaluate the observation impact in the operational storm surge forecasting system based on the Dutch Continental Shelf Model version 5 (DCSMv5).@en