Differential conductance spectroscopy performed in the high bias regime - in which the applied voltage exceeds the sample work function - is a suboptimal measure of the local density of states due to the effects of the changing tunnel barrier. Additionally, the large applied voltage oftentimes makes constant-height measurement experimentally impractical, lending constant-current spectroscopy an advantageous edge; but the differential conductance in that case is even further removed from the local density of states due to the changing tip height. Here, we present a normalization scheme for extracting the local density of states from high bias scanning tunneling spectroscopy, obtained in either constant-current or constant-height mode. We extend this model to account for the effects of the in-plane momentum of the probed states to the overall current. We demonstrate the validity of the proposed scheme by applying it to laterally confined field-emission resonances, which appear as peak-shaped spectroscopic features with a well-defined in-plane momentum.

Historically, electron spin resonance (ESR) has provided excellent insight into the electronic, magnetic, and chemical structure of samples hosting spin centers. In particular, the hyperfine interaction between the electron and the nuclear spins yields valuable structural information about these centers. In recent years, the combination of ESR and scanning tunneling microscopy (ESR-STM) has allowed to acquire such information about individual spin centers of magnetic atoms bound atop a surface, while additionally providing spatial information about the binding site. Here, we conduct a full angle-dependent investigation of the hyperfine splitting for individual hydrogenated titanium atoms on MgO/Ag(001) by measurements in a vector magnetic field. We observe strong anisotropy in both the g factor and the hyperfine tensor. Combining the results of the hyperfine splitting with the symmetry properties of the binding site obtained from STM images and a basic point charge model allows us to predict the shape of the electronic ground state configuration of the titanium atom. Relying on experimental values only, this method paves the way for a new protocol for electronic structure analysis for spin centers on surfaces.

Atomically engineered artificial lattices are a useful tool for simulating complex quantum phenomena, but have so far been limited to the study of Hamiltonians where electron-electron interactions do not play a role. However, it is precisely the regime in which these interactions do matter where computational times lend simulations a critical advantage over numerical methods. Here, we propose a platform for constructing artificial matter that relies on the confinement of field-emission resonances, a class of vacuum-localized discretized electronic states. We use atom manipulation of surface vacancies in a chlorine-terminated Cu(100) surface to reveal square patches of the underlying metal, thereby creating atomically precise potential wells that host particle-in-a-box modes. By adjusting the dimensions of the confining potential, we can access states with different quantum numbers, making these patches attractive candidates as quantum dots or artificial atoms. We demonstrate that the lifetime of electrons in these engineered states can be extended and tuned through modification of the confining potential, either via atomic assembly or by changing the tip-sample distance. We also demonstrate control over a finite range of state filling, a parameter which plays a key role in the evolution of quantum many-body states. We model the transport through the localized state to disentangle and quantify the lifetime-limiting processes, illustrating the critical dependence of the electron lifetime on the properties of the underlying bulk band structure. The interplay with the bulk bands gives rise to negative differential resistance, leading to possible applications in engineering custom atomic-scale resonant tunnelling diodes, which exhibit similar current-voltage characteristics.

Full insight into the dynamics of a coupled quantum system depends on the ability to follow the effect of a local excitation in real-time. Here, we trace the free coherent evolution of a pair of coupled atomic spins by means of scanning tunneling microscopy. Rather than using microwave pulses, we use a direct-current pump-probe scheme to detect the local magnetization after a current-induced excitation performed on one of the spins. By making use of magnetic interaction with the probe tip, we are able to tune the relative precession of the spins. We show that only if their Larmor frequencies match, the two spins can entangle, causing angular momentum to be swapped back and forth. These results provide insight into the locality of electron spin scattering and set the stage for controlled migration of a quantum state through an extended spin lattice.

The orbital angular moment of magnetic atoms adsorbed on surfaces is often quenched as a result of an anisotropic crystal field. Due to spin-orbit coupling, what remains of the orbital moment typically delineates the orientation of the electron spin. These two effects limit the scope of information processing based on these atoms to essentially only one magnetic degree of freedom: the spin. In this work, we gain independent access to both the spin and orbital degrees of freedom of a single atom, inciting and probing excitations of each moment. By coordinating a single Fe atom atop the nitrogen site of the Cu₂N lattice, we realize a single-atom system with a large zero-field splitting—the largest reported for Fe atoms on surfaces—and an unquenched uniaxial orbital moment that closely approaches the free-atom value. We demonstrate a full reversal of the orbital moment through a single-electron tunneling event between the tip and Fe atom, a process that is mediated by a charged virtual state and leaves the spin unchanged. These results, which we corroborate using density functional theory and first-principles multiplet calculations, demonstrate independent control over the spin and orbital degrees of freedom in a single-atom system.

Atomic spin structures assembled by means of scanning tunneling microscopy (STM) provide valuable insight into the understanding of atomic-scale magnetism. Among the major challenges are the detection and subsequent read-out of ultrafast spin dynamics due to a dichotomy in travel speed of these dynamics and the probe tip. Here, we present a device composed of individual Fe atoms that allows for remote detection of spin dynamics. We have characterized the device and used it to detect the presence of spin waves originating from an excitation induced by the STM tip several nanometres away; this may be extended to much longer distances. The device contains a memory element that can be consulted seconds after detection, similar in functionality to e.g. a single photon detector. We performed statistical analysis of the responsiveness to remote spin excitations and corroborated the results using basic calculations of the free evolution of coupled quantum spins.

We present controlled growth of c(2 × 2)N islands on the (100) surface of Cu₃Au, which can be used as an insulating surface template for manipulation of magnetic adatoms. Compared to the commonly used Cu(100)/c(2 × 2)N surface, where island sizes do not exceed several nanometers due to strain limitation, the current system provides better lattice matching between metal and adsorption layer, allowing larger unstrained islands to be formed. We show that we can achieve island sizes ranging from tens to hundreds of nanometers, increasing the potential building area by a factor 10³. Initial manipulation attempts show no observable difference in adatom behaviour, either in manipulation or spectroscopy.

Magnetism at low dimensions is a thriving field of research with exciting opportunities in technology. This Colloquium focuses on the properties of 1D magnetic systems on solid surfaces. From the emulation of 1D quantum phases to the potential realization of Majorana edge states, spin chains are unique systems to study. The advent of scanning tunneling microscope (STM) based techniques has permitted us to engineer spin chains in an atom-by-atom fashion via atom manipulation and to access their spin states on the ultimate atomic scale. Here the current state of research on spin correlations and dynamics of atomic spin chains as studied by the STM is presented. After a brief review of the main properties of spin chains on solid surfaces, spin chains are classified according to the coupling of their magnetic moments with the holding substrate. This classification scheme takes into account that the nature and lifetimes of the spin-chain excitations intrinsically depend on the holding substrate. Interest is shown of using insulating layers on metals, which generally results in an increase in the spin state's lifetimes such that their quantized nature gets evident and they are individually accessible. Next shown is the use of semiconductor substrates promising additional control through the tunable electron density via doping. When the coupling to the substrate is increased for spin chains on metals, the substrate conduction electron mediated interactions can lead to emergent exotic phases of the coupled spin chain-substrate conduction electron system. A particularly interesting example is furnished by superconductors. Magnetic impurities induce states in the superconducting gap. Because of the extended nature of the spin chain, the in-gap states develop into bands that can lead to the emergence of 1D topological superconductivity and consequently to the appearance of Majorana edge states. Finally, an outlook is given on the use of spin chains in spintronics, quantum communication, quantum computing, quantum simulations, and quantum sensors.

Recently, the doping of topological insulators has attracted significant interest as a potential route towards topological superconductivity. Because many experimental techniques lack sufficient surface sensitivity, however, definite proof of the coexistence of topological surface states and surface superconductivity is still outstanding. Here we report on highly surface sensitive scanning tunneling microscopy and spectroscopy experiments performed on Tl-doped Bi2Te3, a three-dimensional topological insulator which becomes superconducting in the bulk at TC=2.3 K. Landau level spectroscopy as well as quasiparticle interference mapping clearly demonstrated the presence of a topological surface state with a Dirac point energy ED=-(118±1) meV and a Dirac velocity vD=(4.7±0.1)×105 m/s. Tunneling spectra often show a superconducting gap, but temperature- and field-dependent measurements show that both TC and μ0HC strongly deviate from the corresponding bulk values. Furthermore, in spite of a critical field value which clearly points to type-II superconductivity, no Abrikosov lattice could be observed. Experiments performed on normal-metallic Ag(111) prove that the gapped spectrum is caused only by superconducting tips, probably caused by a gentle crash with the sample surface during approach. Nearly identical results were found for the intrinsically n-type compound Nb-doped Bi2Se3. Our results suggest that the superconductivity in superconducting-doped V-VI topological insulators does not extend to the surface where the topological surface state is located.

We investigate the thickness-dependent electronic properties of ultrathin SrIrO3 and discover a transition from a semimetallic to a correlated insulating state below 4 unit cells. Low-temperature magnetoconductance measurements show that spin fluctuations in the semimetallic state are significantly enhanced while approaching the transition point. The electronic properties are further studied by scanning tunneling spectroscopy, showing that 4 unit cell SrIrO3 is on the verge of a gap opening. Our density functional theory calculations reproduce the critical thickness of the transition and show that the opening of a gap in ultrathin SrIrO3 requires antiferromagnetic order.

Within the last three decades Scanning Probe Microscopy has been developed to a powerful tool for measuring surfaces and their properties on an atomic scale such that users can be found nowadays not only in academia but also in industry. This development is still pushed further by researchers, who continuously exploit new possibilities of this technique, as well as companies that focus mainly on the usability. However, although imaging has become significantly easier, the time required for a safe approach (without unwanted tip-sample contact) can be very time consuming, especially if the microscope is not equipped or suited for the observation of the tip-sample distance with an additional optical microscope. Here we show that the measurement of the absolute tip-sample capacitance provides an ideal solution for a fast and reliable pre-approach. The absolute tip-sample capacitance shows a generic behavior as a function of the distance, even though we measured it on several completely different setups. Insight into this behavior is gained via an analytical and computational analysis, from which two additional advantages arise: the capacitance measurement can be applied for observing, analyzing, and fine-tuning of the approach motor, as well as for the determination of the (effective) tip radius. The latter provides important information about the sharpness of the measured tip and can be used not only to characterize new (freshly etched) tips but also for the determination of the degradation after a tip-sample contact/crash.

The ability to manipulate single atoms has opened up the door to constructing interesting and useful quantum structures from the ground up. On the one hand, nanoscale arrangements of magnetic atoms are at the heart of future quantum computing and spintronic devices; on the other hand, they can be used as fundamental building blocks for the realization of textbook many-body quantum models, illustrating key concepts such as quantum phase transitions, topological order or frustration as a function of system size. Here, we use low-temperature scanning tunnelling microscopy to construct arrays of magnetic atoms on a surface, designed to behave like spin-1/2 XXZ Heisenberg chains in a transverse field, for which a quantum phase transition from an antiferromagnetic to a paramagnetic phase is predicted in the thermodynamic limit. Site-resolved measurements on these finite-size realizations reveal a number of sudden ground state changes when the field approaches the critical value, each corresponding to a new domain wall entering the chains. We observe that these state crossings become closer for longer chains, suggesting the onset of critical behaviour. Our results present opportunities for further studies on quantum behaviour of many-body systems, as a function of their size and structural complexity.

The advent of devices based on single dopants, such as the single-atom transistor, the single-spin magnetometer and the single-atom memory, has motivated the quest for strategies that permit the control of matter with atomic precision. Manipulation of individual atoms by low-temperature scanning tunnelling microscopy provides ways to store data in atoms, encoded either into their charge state, magnetization state or lattice position. A clear challenge now is the controlled integration of these individual functional atoms into extended, scalable atomic circuits. Here, we present a robust digital atomic-scale memory of up to 1 kilobyte (8,000 bits) using an array of individual surface vacancies in a chlorine-terminated Cu(100) surface. The memory can be read and rewritten automatically by means of atomic-scale markers and offers an areal density of 502 terabits per square inch, outperforming state-of-the-art hard disk drives by three orders of magnitude. Furthermore, the chlorine vacancies are found to be stable at temperatures up to 77 K, offering the potential for expanding large-scale atomic assembly towards ambient conditions.