The mechanical strength of sintered nanoparticles (NPs) limits their application in advanced electronics packaging. In this study, we explore the anisotropy in the microstructure and mechanical properties of sintered copper (Cu) NPs by combining experimental techniques with molecular dynamics (MD) simulations. We establish a clear relationship between processing conditions, microstructural evolution, and resulting properties in pressure-assisted sintering of Cu NPs. Our findings reveal that pressure-assisted sintering induces significant anisotropy in the microstructure, as evidenced by variations in areal relative density and the orientation distribution of necks formed during sintering. Specifically, along the direction of applied pressure, the microstructure exhibits reduced variation in areal relative density and a higher prevalence of necks with favorable orientations. The resulting anisotropic mechanical properties, with significantly higher strength along the pressure direction compared to other directions, are demonstrated through micro-cantilever bending tests and tensile simulations. This anisotropy is further explained by the combined effects of strain localization (influenced by areal relative density) and the failure modes of necks (determined by their orientation relative to the loading direction). This work provides valuable insights into the analysis of sintered NPs microstructures and offers guidance for optimizing the sintering process.

As the dimensions of interconnects in integrated circuits continue to shrink, an urgent need arises to understand the physical mechanism associated with electromigration. Using x-ray nanodiffraction, we analyzed the stresses in Blech-structured pure Cu lines subjected to different electromigration conditions. The results suggest that the measured residual stresses in the early stages of electromigration are related to relaxation of stresses caused by thermal expansion mismatch, while a developing current-induced stress leads to reductions in the residual stress after longer test times. These findings not only validate the feasibility of measuring stress in copper lines using nanodiffraction but also highlight the need for a further understanding, particularly through in situ electromigration experiments with x-ray nanodiffraction analysis.