Effects of temperature on autogenous deformation and early-age stress evolution in cement pastes with low water to cement ratio

More Info
expand_more

Abstract

This paper investigates the influence of temperature on autogenous deformation and early-age stress (EAS) evolution in ordinary Portland cement paste using a recently developed Mini Temperature Stress Testing Machine (Mini-TSTM) and Mini Autogenous Deformation Testing Machine (Mini-ADTM). In the Mini-TSTM/ ADTM, CEM I 42.5 N paste with a water-cement ratio of 0.30 was tested under a curing temperature of 10, 15, 20, 25, 30, and 40 °C. X-Ray diffraction (XRD) tests were conducted to measure the amount of ettringite and calcium hydroxide, which reveals the micro-scale mechanisms of autogenous expansion. The applicability of the Maturity Concept (MC) for the prediction of autogenous deformation and relaxation modulus under different temperatures was also examined by the experimental data and the viscoelastic model. This paper leads to the following findings: 1) The autogenous deformation of ordinary Portland cement paste is a four-stage process comprising the initial shrinkage, autogenous expansion, plateau, and autogenous shrinkage; 2) Higher temperature leads to higher early-age cracking (EAC) risk because it accelerates the transitions through the first three stages and causes the autogenous shrinkage stage to start earlier. Moreover, higher temperatures also result in increased rates of autogenous shrinkage and EAS in the autogenous shrinkage stage; 3) Autogenous expansion and plateau are attributed to the crystallization pressure induced by CH. Temperature-dependent CH formation rates determine the duration of the plateau stage; 4) Low-temperature curing can delay but not completely prevent the EAC induced by autogenous deformation; 5) The MC cannot predict the autogenous deformation at different temperatures but can be used to calculate the relaxation modulus, which in turn aids in EAS prediction based on autogenous deformation data.