Decommissioning Offshore Wind Export Cables in the North Sea

Master thesis (2024)

Authors

W.T. Bruinsma Mechanical Engineering

Contributors

R.L.J. Helmons Offshore and Dredging Engineering - Mechanical, Maritime and Materials Engineering (mentor)
Otto Kooy (mentor)
Svein Sævik Norwegian University of Science and Technology (NTNU) (mentor)
E. Bachynski-Polić Norwegian University of Science and Technology (NTNU) (mentor)
G.H. Keetels Offshore and Dredging Engineering - Mechanical, Maritime and Materials Engineering (graduation committee member)
Bernt Johan Leira Norwegian University of Science and Technology (NTNU) (graduation committee member)
Faculty
Mechanical Engineering, Mechanical Engineering
More Info
expand_more

Published Date

05-07-2024

Language

English

Reuse Rights

Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.

Faculty

Mechanical Engineering

Abstract

Offshore wind energy has become a crucial element of the global energy transition, with the North Sea being a major hub for offshore wind farms. As first-generation farms approach the end of their operational life, decommissioning offshore wind export cables has emerged as a significant technical challenge. This thesis focuses on the feasibility and limitations of using the cable pullout method for decommissioning offshore wind export cables, particularly examining the influence of burial depth and soil conditions.

This research is structured in two main phases. The first phase involves a comprehensive literature review to identify critical knowledge gaps and establish an overview and understanding of existing decommissioning practices. The second phase employs simulations using OrcaFlex software to model and analyze various cable pullout scenarios. These simulations focus on determining the limits and constraints imposed by burial depth and soil relative density for sandy soils commonly found in the North Sea.

Key findings from the literature study underscore the complexities of decommissioning, which encompass legal, environmental, economic, and technical considerations. One of the main conclusions is the importance of adopting a 'design for decommissioning' approach during the initial cable installation. This involves designing cables and selecting burial depths that facilitate easier future removal, thus promoting sustainability and cost-effectiveness. Additionally, this approach can help mitigate potential environmental impacts and regulatory challenges associated with cable removal.

Soil modelling plays a crucial role in understanding how burial depth and soil conditions influence resistance forces during cable pullout. Factors such as shear strength and burial depth are analyzed to determine the forces that oppose cable recovery. The model includes scenarios for fully drained, fully undrained, and partially drained uplift resistance, implemented in a Python script to simulate real-time resistance during pullout operations. To address buried cables, an external soil model is integrated into OrcaFlex, allowing dynamic simulations of soil resistance during cable pullout.

The simulation results with a 525 kV HVDC export cable reveal how soil resistance significantly increases with greater burial depth and higher soil density. These findings highlight the critical importance of burial and soil conditions in planning decommissioning operations and suggest that additional deburial techniques may be necessary when cable pullout is not feasible.

This thesis provides valuable insights and recommendations for future research and practical applications, aiming to support the offshore wind industry's evolving needs and enhance the sustainability of decommissioning processes. These findings are crucial as the industry anticipates a substantial increase in decommissioning activities, with offshore wind capacity expected to continue to grow.