This paper investigates how two sequential sub-processes at a flower auction can be well aligned to efficiently execute the overall auction process. Existing literature mainly focuses on warehouses without perishable goods and warehouses where all orders are known before the outbound process is started. However, at a flower auction, the gathering of goods and distribution takes place while the auction is still ongoing. In addition, flowers are vulnerable goods that must be handled with care.
During a case study at Royal FloraHolland Naaldwijk, the current process of order picking and in-house delivery is investigated to find the main strengths and bottlenecks. This is done physically and with data. From this analysis,
it has been found that the main issues are the spread and share of waiting times in the in-house delivery process and the output of the order-picking process that is too low. To improve the overall process based on the found issues, a calculation model has been built in Python to test possible improvements. It has been found that implementing limited waiting times and other alterations to increase efficiency results in a more reliable and better predictable
process that can be executed with approximately the same number of work hours or slightly more than in the current situation.

Maritime shipping is essential for global trade, requiring the coordinated efforts of shipping lines, ports, and logistics providers. Early collaborative efforts focused on enhancing competitiveness, but the emphasis has shifted towards achieving environmental sustainability and resilience. This thesis provides collaborative approaches for resilient and decarbonized maritime and port operations, highlighting the importance of stable cost allocation methods to foster strong and lasting collaboration incentives.@en

As the energy transition progresses and vessel autonomy increases, the control of marine systems is gaining greater significance. This thesis develops safe and resilient control methods for marine Power and Propulsion Plants (PPPs). The proposed methods include fault diagnosis techniques and frameworks for managing the effects of malfunctions and system changes after mission updates, aiming to improve the safety and adaptability of marine PPPs in the evolving maritime industry.@en

Container transport requires constant improvement to be more efficient and sustainable. Improvements can take the form of innovations, investments or policies. This thesis develops choice-driven methods to enhance decision-making in intermodal freight transport by focusing on demand, supply, and competition aspects considering heterogeneous behaviors and interactions of actors. The proposed methods support policy-makers, transport companies, and planners in foreseeing the impacts of their decisions on the involved actors.@en

This research paper focuses on improving the performance of cross-docking operations under uncertainty in the context of e-commerce logistics. The growth of e-commerce sales has increased product returns and complexity to supply chains. To address this issue, this study investigates how cross-docking operations can be improved under external and internal uncertainty factors. The research begins with a literature review to understand cross-docking facilities (CDFs) and measures to mitigate the effects of uncertainty. The current state of a CDF in a case study for a Fourth Party Logistics (4PL) provider is examined, and by reflecting on the literature overview, two potential means for decreasing the effects of uncertainty are identified: staging-level design and load carrier-type design.

A Discrete Event Simulation (DES) model is developed to test the effects of staging-level design and load carrier types on the performance of the CDF. The simulation model captures input factors such as truck arrivals, freight levels, and the purity level of cross-docking. The simulation model’s performance is tested for different scenarios, and the effects of different design alternatives are analyzed.

The results demonstrate that two-stage cross-docking with pallets can significantly reduce the total makespan and improve operational efficiency compared to single-stage cross-docking with pallets. The results also show that using roll containers significantly decreases the chance of intra-terminal congestion but also results in longer unloading and reloading times. The research contributes to the understanding of cross-docking operations under uncertainty, stresses the importance of staginglevel
and load carrier type design on CDF performance, and provides insights for logistics companies seeking to optimize their e-commerce supply chains.

A relatively new concept within demand management for time window assignment is green labeling; time windows which contribute to improving the routing performance in terms of sustainability. Certain time slots are given a so-called green label. From literature, limited information is known about the choice preference with regard to green labeling and its impact on routing performance. Via choice modeling, certain attributes are estimated based on a data set from an e-grocer. Together with a beta estimate on green labeling from literature, the effect of green labeling on choice behavior is analyzed. The results are used for route optimization where the effect of various static and dynamic approaches are tested. Results show that dynamic green labeling has the most promising effect on routing performance in terms of costs and sustainability. Especially when customers are more nudged toward the largest time windows in less popular day parts. The CO2 emissions decrease by 127.4 CO2 per order and the costs decrease by 1.03 euro per order on average. These results are based on the specific situation of the e-grocer in the case study. With regard to choice modeling, this research is limited to only time window characteristics. The improvements in terms of costs and sustainability per green labeling approach, based on the attributes resulting from real-data choice modeling, contribute to more knowledge on the effect of green labeling on routing performance.

The demand for accurate and effective cool chains has been expected to increase, especially for pharmaceuticals in the air freight industry. However, several problems and challenges remain such as cool chain breaks and cool storage capacity constraints while there are rarely routine systems in place for consistent insight into the operational quality of such systems. Besides, the concept of a DT has received increasing attention in the literature, while a multitude of applications have been found in fresh cool chains. Therefore, the DT concept has been applied to a pharmaceutical cool chain for operational quality improvement. Firstly, a novel operational quality metric has been proposed: the OCCE. Consequently, a cool chain at KLM Cargo has been studied and modelled by means of the DES technique in order to derive a virtual representation. Consequently, the DT concept has been applied through the implementation of a decision support module for cool storage decision-making. The model implementation has shown that the cool chain operational quality has been improved while the average exposure of freight has decreased.

Offshore wind energy can play a key role in the energy transition. Reducing installation costs for offshore wind installation projects helps to be cost-competitive with other renewable energy technologies. Installation costs can increase when the installation project planning is delayed. Literature shows that offshore wind installation projects are delayed by weather conditions exceeding operational limits and downtime caused by vessels and equipment. However, the magnitude and causes of downtime due to equipment breakdown are unclear. Additionally, no method is found in the literature to reduce downtime due to equipment breakdown in offshore wind installation. Data-analysis of observed failure data shows that equipment breakdown causes downtime during pinpile installation during the spring and summer seasons. Root-cause analysis indicates that scheduled preventive maintenance is often postponed on the critical path when weather conditions are favourable for installation. These decisions are made based on knowledge of oil and gas projects, but that knowledge is not applicable anymore. In this study a new method is proposed, which includes equipment characteristics and preventive maintenance on the critical path of an installation schedule, using discrete-event simulation (DES). In the DES model, four designs are simulated to gain insight into the effect of decision-making on the critical path on key performance indicators. The designs are based on the planned maintenance pillar of the Total Productive Maintenance framework. Implementing equipment breakdown and preventive maintenance in the installation schedule gives insight into the effects of decision-making before project execution. The results of this study indicate that the downtime due to breakdown and preventive maintenance of the hammer can be reduced by 10% if preventive maintenance is prioritized on the critical path.

The present study was designed to gain a deeper understanding of RTI control and Supply Chain Coordination, with a specific focus on the practical challenges experienced in the reverse logistics by asset-owner and asset-users. A case study at EPS - an RTI owner - is performed and a practical problem has been addressed with a design science and TIL systems engineering approach. It was observed that a huge amount of deposit is allocated to a retailer's generic account. The current state analysis found that this problem is mainly due to inefficiency in the current identification process with physical SSCC labels. The design goal of minimising the "Delta" -the number of unidentifiable return packages- was defined. Ways to redesign the reverse logistics were determined with the aim that all return packages can be allocated to the retailer at shop level. Based on the future state requirements and the design goal, the concept of matchmaking is developed as a way to achieve the design goal. This thesis shows that a matchmaking system can improve the traceability of return packages and that it has the potential in bringing the Delta of return packages with missing shoplink to zero.
The matchmaking system is defined as the framework that ensures matchmaking, which uses a "key" generated by the sender to represent the return package. If the receiver can find the key upon arrival of the return package at the depot, the sender can be identified. Seven matchmaking systems were considered. Five alternatives use unique tray identities as key. One alternative uses the load carrier as key and the last alternative uses the return package identity as key. The validation results show that an "all read" or "reading of all individual trays" is not a requisite for a working matchmaking system. By contrast, as long as a certain ratio of reading at two locations is reached, an all-read scenario can be mimicked. The assessment investigated the instances in which zero mismatch take place. Results show that the higher the data capture capability of both the sender and receiver, the higher the chance a match can take place and the smaller the chance of a mismatch. This thesis creates insights on requirements for enhancing traceability of RTI's in the return chain and developed a matchmaking concept that can address the practical problem of returns without traceability of shop origin. The developed matchmaking concept is the outcome of an analysis of the current state and makes use of data elements that are already being collected in the database, in the case of EPS. The study addresses how collected data can be leveraged for enhanced RTI management in the reverse logistics and may inspire practitioners to face challenges with a similar lean approach.

Offshore lifting operations must have reduced payload motion to increase safety and reduce operating time. When payload is retrieved from the splash zone to the deck, besides the crane block, no additional control can be applied on the underactuated system. Existing studies either assume more control over the payload or develop a control system based on a new crane. To reduce payload motion on current crane vessels, a conceptual model needs to be developed.

In this thesis, various state-of-the-art solutions are considered based on four criteria: Time reduction, motion reduction, initial investment required and power required. Eventually, the quantified criteria and an analytic hierarchy process established that the most promising concept is based on an automated side loader of a garbage truck.

The selected concept is developed based on a design process that focuses on optimized material usage. The geometry is determined according to requirements and forms the starting point of the circular design process. A dynamic analysis is conducted to obtain the dynamic response of the payload and eventually the reduced payload motion. The design cycle is complete after a finite element analysis has been conducted to verify the structural integrity of the model. After more than 20 cycles of the design process, the conceptual model is optimized and over 85% of motion is reduced in the X direction. The payload motion in Y- and Z-direction is 20% and 29% respectively.

The simulation results in this study show that the conceptual model is able to reduce the payload motion during offshore lifting operations whilst staying within the limits set by offshore standards. The motion reduction of the payload creates a safer and more efficient environment to execute offshore lifting operations.

Abstract
Purpose - The aim of this paper is to propose a method for performance measurement of the livestock feed industry from an environmental and economic perspective. There is a knowledge gap both in the literature and society in the field of performance measurement of the livestock feed industry with environmental concerns. Livestock feed companies need support in the decision-making process to produce environmentally sustainable livestock feed at as low as possible costs.
Design/methodology/approach – An environmental performance index for livestock feed is constructed based on techniques of the min-max transformation, the analytic hierarchy process and simple additive weighting. The verified environmental performance index for livestock feed is brought into practice; different scenarios, which all represent a feed composition, are quantitatively compared to a benchmark feed composition. The environmental performance index is validated with an uncertainty analysis and sensitivity analysis.
Findings – The constructed environmental performance index for livestock feed is assessed by comparing nine scenarios against a benchmark feed composition. The results indicate that the environmental performance index for the livestock feed industry is technically feasible and effective to measure the performance of the livestock feed industry from an environmental and economic perspective.
Research implications – The constructed environmental performance index for
livestock feed can serve as a decision-making tool for livestock feed companies. As a response to climate regulations and a market pull, this paper provides a tool for livestock feed companies to select livestock feed compositions with the best performance based on environmental sustainability and economic performance.
Originality/value – A new performance measurement method is designed for an
environmental performance index for the livestock feed industry. From the literature, environmental sustainability variables are identified. The data on the environmental performance are obtained from a public database as well as a livestock feed company. The created index can contribute to decision-making in the livestock feed industry.

This thesis has provided insight into how machine learning can be beneficial to path planning in container terminals. Path planning algorithms can be used in environments with automated vehicles. A well known algorithm is the A* path planning algorithm, which is the fastest optimal path planning algorithm under satisfied conditions. However, the behaviour of a container terminal is unknown beforehand, costs can change over iterations. Therefore, Liu et al. [Liu et al., 2019] and Keselman et al. [Keselman et al., 2018] show the advantage of combining A* with Machine Learning. This way, the exploring part of the ML algorithm is combined with the fast andmore precise properties of the A* PP algorithm. This thesis has proposed the machine learning algorithm Vehicle Aware Reinforcement Learning Path Planning Algorithm VARLPPA. This algorithm uses Monte Carlo Control method. This is a model free approach, which has been shown in both experiments to find more efficient solutions in exceptional situations.

There has been a growing interest in improving the operating efficiency of warehouses, which is one of the critical facilities used in the logistics sector. This thesis examines the impact of order characteristics on the performance of different configurations of the outbound logistics of a 3PL warehouse. A contingency approach combined with a proof of configuration method is used to answer this question. The contingency variables in this study are the order characteristics, which are uncertain for the future state of the newly built e-commerce warehouse Haaften III for Nedcargo Logistics, A third-party logistics provider in the Netherlands. Six contingency scenarios are chosen, and a model transforms them into experiments. Three different potential warehouse configuration models process these experiments, and their productivity performance is compared and analysed. Our results showed that the compactness of the layout, ABC-class-based storage and a new picking strategy, Star Aisle Batch combined with Singlepicks, provides the best productivity in each scenario. Next, between each scenario, the productivity is impacted differently. The productivity is higher if the order characteristics contain a low percentage of A-type products, the amount of colli is high, or orderlines per order are low. A change in configuration or strategy within each scenario also influences productivity differently. Lastly, it is also proved that the new proposed configuration and picking strategy can improve its current productivity by over 30%.

In 2018, the International Maritime Organization (IMO) adopted a resolution to reduce the emission of greenhouse gasses of maritime shipping in the near future. A reduction of 50% in CO2-emissions is the goal for the year 2050 in comparison to 2008. Furthermore, the peak in emissions should lie before 2025 and steadily decrease afterwards.
Low-hanging fruit regarding the reduction of emissions is operations optimization. Information-sharing about the proces status of different vessels is deemed the integrator for optimization of the port call and the reduction of vessel emissions.
This thesis focusses on the impact of increased information-sharing in the port call by the design of a preliminary model regarding port call optimization as well as a possible concept development using rolling-horizon arrival and departure scheduling. Reduction of emissions is obtained through the installment of a virtual arrival policy.
The outcome of this study shows that such a strategy indeed can result in lower emissions. This outcome was obtained based on discreet event simulation of the port call process of a large port in Australia. For the proposed rolling horizon scheduling strategy, the reduction of emissions was 16.5% but it comes at the cost of extra time in the port call.

This research investigates ways to maximize the outbound handling and freight to customer operations efficiency based on the real data of The Kraft Heinz Company. A cost to serve model has been developed to evaluate the performance of various design alternatives deriving from the field of "quantity adjustment" as the dependence of cost efficiency upon labour intensity at the warehouses and the truck volume utilization indicated. The research concludes upon the selection of the optimal design alternative to be implemented per customer as well as upon which design alternative is more suitable for clusters of customers that share specific characteristics.

Industrial electric motors are at the heart of almost every industry. They are a 47 billion USD market in 2020 and consume 70% of all industrial electricity. They are generally paired with a gearbox and load, which is referred to as an electric gearmotor system. Being so essential means that it is important to avoid failures, 98% of 300 researched companies by ITIC reported a cost of 100.000 USD every hour of downtime. To detect failures a technology called fault detection and diagnosis (FDD) is used, which is a method to foresee failures or faults in a system that deteriorates over time through evaluating the state of the system. It is an extensively academically research subject, however, has hardly been adopted in industrial settings where electric gearmotor systems are applied. Thus, a FDD model was developed to provide insight, knowledge, and a practical example into the necessities of an industrial FDD model. This was achieved through conducting an analysis on the state-of-the-art of FDD in industrial settings and conducting a literature review on FDD. Based on an analysis of the conclusions a hybrid diagnostics model was developed. For the fault detection a model-based solution was used, it compared the predicted torque to the measured torque of a motor to create a health indication value. If this value crosses a pre-determined threshold an alarm would go off. For fault identification a decision tree machine learning algorithm is used to identify: blockage, bearing, gear or random failure in a system. To verify and validate the hybrid diagnostics model it was applied to a client of SEW Eurodrive where data was available of a known system. The system had a fault detection accuracy as high as 94% and could classify failures with an accuracy of 93%.

Covid-19, the Suez canal blockade and a decreasing amount of larger shipping companies have changed the container shipping industry. A power shift from the exporter towards the shipping companies is occurring, paired with capacity constraints and surging container transportation prices indicating a global container shortage. Exporters of large volume mainly experience this with contract negotiations and are left with a choice for higher prices or less flexibility in contractual service conditions whilst striving to become more sustainable. This study answers the following research question: ‘How should large exporters like HNS weigh off transportation costs, flexibility in service conditions and environmental effects for contractual agreements in times of a global container shortage?’. This study poses several designs through the DMADE methodology to anticipate the aforementioned changes. It does so by modelling several designs based on contract variables, a modal shift and a production division based on geographical locations of breweries for Heineken Netherlands Supply. The study found that higher standard tariffs for container transportation should be preferred above less flexibility. Next to that a modal shift towards road transport is advised if the service conditions in contractual agreements become less flexible.

This thesis looks into the link between the Volkswagen emission scandal, or dieselgate, and the strong rise of electric vehicles in the years following that event. In order to investigate this, a framework is build that describes the process of an innovation (the electric vehicle), taking over from an incumbent technology (fossil fuel cars), in measurable factors. This framework combines several theories on these subjects, including innovation diffusion, standard battles, disruptive innovation and radical innovation. The addition of manners to measure the underlying factors is one of the new aspects this thesis brings to both science and society. Through the application of the framework in case study concerning the automotive industry, it was concluded that dieselgate has indeed influenced the rise of electric vehicles, both directly and indirectly through Company Strategy, the reputation of a company, the opinion of consumers on technology, and government regulations and incentives.

This report details the design process of a process performance measurement system for zero-defects logistics, with a focus on process quality. The system is the result of a combination of theoretical sources and best practices found in various industries. The final design is applied on the distribution process of cut flowers at Royal FloraHolland in Naaldwijk. Calculations return the expectation that implementing the system leads to increased process quality and a decrease in financial impact of poor quality.