V

VI Savran

24 records found

Austenite nucleation and growth observed on the level of individual grains by three-dimensional X-ray diffraction microscopy.

Austenite formation in C-Mn steel.
Doctoral thesis (2009) - VI Savran (author)

Austenite formation in C35 and C45 alloys.

Microstructural features of austenite formation in C35 and C45 alloys.

Poster: Growth of individual austenite grains measured with 3DXRD microscopy.
Poster (2007) - VI Savran (author)

Growth of individual austenite grains measured with 3DXRD microscopy.

Poster: Austenite nucleation and growth measured on the level of individual grains using 3DXRD microscopy.
Poster (2007) - VI Savran (author)

A study of the ferrite to austenite heating transformation in order to better control the microstructure in cold-rolled annealed multiphase steels. Quarterly progress report July-September 2006.
Report (2006) - VI Savran (author)

A study of the ferrite to austenite heating transformation in order to better control the microstructure in cold-rolled annealed multiphase steels. Quarterly progress report April-June 2006.
Report (2006) - VI Savran (author)

A study of the ferrite to austenite heating transformation in order to better control the microstructure in cold-rolled annealed multiphase steels. Quarterly progress report January-March 2006.
Report (2006) - VI Savran (author)

A study of the ferrite to austenite heating transformation in order to better control the microstructure in cold-rolled annealed multiphase steels. Annual Report 2006.
Report (2006) - VI Savran (author)

The ferrite-to-austenite phase transformation in low alloy steel.
Poster (2006) - VI Savran (author)

Austenization of hot and cold-rolled C-Mn steels. Internship report.

Austenite formation in C35 and C45 alloys.
Poster (2006) - VI Savran (author)

The experimental study on the effect of heating rates on the alpha-gamma transformation in C22, C35, C45 and C60 alloys. NIMR report.
Report (2005) - VI Savran (author)

The ferrite-to-austenite phase transformation in low-alloy steel.

Effects of melt temperature casting speed on the structure and defect formation during direct-chill casting of an Al-Cu alloy.

Effects of alloy composition and casting speed on structure formation and hot tearing during direct-chill casting of Al-Cu alloys.

Effect of process parameters on structure formation during direct-chill casting of Al-Cu Alloy

Ferrite to austenite heating transformation in steels.
Report (2004) - VI Savran (author)