The SCCALE 20-30-50 toolkit will include different guides and briefings to support the creation of local energy communities. It will be a collection of existing knowledge within the community energy movement, and tested techniques used in the 5 pilots of the project.@en

Co-creation is often presented as a solution to challenges of achieving energy transitions. However, there is currently little known about how coordinating stakeholders, such as city administrations, interpret co-creation and the extent to which this influences co-creation processes. We draw on a recent project, which embedded co-creation in public decision-making about local-level, sustainable heating transitions. We specifically address the question of how co-creation has been interpreted and implemented by administrations in two major Belgian cities, Bruges and Mechelen, between 2019 and 2023. Data collection included expert interviews, participatory observation, workshops, focus groups, and reviews of action plans and policy documents. We found that a normative understanding of co-creation evolved amongst the project coordinators, who inherently valued the inclusion of citizens in sustainable heat transitions, although actual co-creation only took place at the end of the project (2022–2023). However, we observed structural impediments and contexts that impinge on co-creation: a perceived conflict between community engagement and existing policy agendas, departmental interests; the instrumental framing of projects and the role of co-creation; and the impact of wider political pressures and events (in this case the COVID-19 pandemic restrictions). Conclusions are drawn regarding the longer-term benefits of co-creation for coordinating stakeholders. We also stress the need for research to more fully attend to the structural relations that enable and constrain these actors to practice and innovate with co-creation.@en

This report presents Deliverables 2.1 and 2.2 of the Horizon 2020 SCCALE 203050 project (Sustainable Collective Citizen Action for a Local Europe). The aim of this project is to scale the growth of energy communities - or “Renewable Energy Communities'' according to the EU Renewable Energy Directive (RED II) - across Europe in the areas of energy efficiency, renewable energy production, district heating in households and non-residential buildings. This report is the first deliverable of Work package 2 (Research and Academic Validation) which seeks to gain a better understanding of how collective citizen actions in sustainable energy develop, grow, mature - in other words, how they come of age. This will be done by analysing, monitoring and evaluating experiences of collective citizen action and community engagement in the domains of sustainable energy (i.e. renewable energy, energy efficiency, and energy conservation). This report first presents the results of a literature review (i.e. Deliverable 2.1) – using both academic and grey literature - on energy communities and collective citizen actions contributing to sustainable energy transitions. However, the report goes beyond a literature study. Instead, it was developed as a collaborative effort between the research team at Delft University of Technology and community energy experts and practitioners using multiple interactive and feedback meetings. The central aim of this report is to generate insights into the actions and activities energy communities and citizen collectives undertake to develop and mature their organisations with the objective to scale, achieve transformative change, and make both a social and environmental impact. The report maps state of the art insights into collective citizen actions at the neighbourhood level, targeting energy efficiency and renewable energy technology measures alike. Moreover, it addresses relevant theory and good practice on actions and activities that energy communities can pursue, partly based on theory and partly based on case studies. In addition, the report also takes into account issues like energy poverty, energy democracy, energy justice, social inclusiveness, citizen engagement, multi-stakeholder management in neighbourhoods, the use of digital tools, and data protection (to cope with increasing cybersecurity issues). In addition, the report presents the development and design of a monitoring tool (Deliverable 2.2). The Development Progress Tool uses knowledge from the literature study. This is firstly used to elaborate the energy community maturity scale and framework as developed under the Horizon 2020 COMPILE project (Seebauer et al., 2022). The elaborated maturity index forms the conceptual basis and framework to develop a monitoring tool. The latter will be implemented, tested and validated among the five demonstration pilots of SCCALE 203050 in 2022-2023. @en

Sustainable Heating Implementation of Fossil-Free Technologies (SHIFFT) is an Interreg 2 Seas-funded project focused on the adoption of low-carbon heating in existing residential and community buildings. The specific objective of SHIFFT is to increase the adoption of low-carbon technologies and applications in sectors that have the potential for a high reduction in greenhouse gas emissions. SHIFFT envisages achieving this by accelerating the market adoption of sustainable heating solutions for replacing fossil technologies used for domestic heating. One way to do this is by having six co-creation pilots located in four countries in the 2 Seas region. With the co-creation pilots SHIFFT aims to achieve a reduction of 3,422 tons CO2 emission/year resulted from the installation of sustainable heating systems and behavioural change in heating practices by 4,295 households through co-creation and related measures. In SHIFFT, co-creation refers to a participatory process where citizens, public authorities, and other (local) stakeholders provide input, co-define problems, co-design a solution, a plan or policy to achieve a beneficial outcome for all parties participating, and do this in the domain of sustainable heating. The aim of this report is to identify challenges, barriers, lessons and tips for replication and transfer of successful co-creation to other cities. A three-step approach was used with each co-creation pilot first conducting a stakeholder and situational analysis (February 2020). Second, co-creation action plans were developed (June 2020). These were implemented eventually implemented (July 2020 – December 2022). The process was supported by a co-creation expert team consisting of academic partners. The six co-creation pilots are: Bruges, Mechelen (Belgium), Middelburg (Netherlands), Fourmies, Hauts-de-France (France), and Norwich (United Kingdom). Implementation of the action plans was greatly hindered in the first nineteen months of the project due to the COVID-19 pandemic, which led to lockdowns and other restrictive measures and which made it impossible to implement many real-life (in person) co-creative actions. In the face of the greater difficulty pilot hosts had to resort to less effective online modes of co-creation. After the COVID-19 pandemic restrictions were lifted in the Spring of 2022 implementation of (adapted) action plans could be begun in real-life settings. After the Summer of 2022 implementation processes and the number of actions implemented intensified, more particularly in the pilots Bruges, Middelburg, Fourmies, and Mechelen. In total, over 60 activities were deployed, resulting in about a hundred sub activities. Performance of the co-creation pilots was measured using five key performance indicators. In terms of CO2 emission reduction impact, the co-creation pilots jointly (i.e., on aggregated level) managed first to achieve (and exceed) the goal of 3,422 tons CO2 emission/year. They then reached 224% of this target (i.e. 7,677 tons CO2 emission/year). Four out of six pilots met their individual CO2 emission reduction impact goals. In terms of households engaged, the co-creation pilots jointly (i.e., on aggregated level) managed to exceed the household engagement goal of by engaging 6,769 households. Four out of six pilots achieved their individual household engagement goal. Other performance indicators on which co-creation pilots were monitored pertained to investments made, behavioural change and social networks formation. The pilots did quite well on the latter. Average investments in co-creation pilots were estimated to be about €196,538,293. Challenges encountered in the co-creation pilots pertain to instrumental framing, letting go of traditional (i.e., top-down) ways of working, departmental interests, dependence on local stakeholders, personnel turnover, the COVID-19 pandemic, having to do with challenges and risks potential adopters perceive (like high upfront costs and negative ‘myths’ about sustainable heat options), and lack of (access to) information. 4 In different ways the co-creation pilots contributed to setting the right conditions under which (more advanced) co-creation in sustainable heat can be implemented in the future. This approach entails both co-creative action and being tailored in combination with sustainable heat policy, which is necessary to persuade local stakeholders when implementing co-created plans. The co-creative three-step approach developed in SHIFFT can be considered for use and for scaling in locations outside the initial SHIFFT co-creation pilots. Scaling pertains to replicating certain successful SHIFFT pilots in other cities or even regions, sharing the approach and tools developed (i.e., action plan approach, monitoring approach, CO2 impact tool, expert team support) with expert platforms on heat transitions, or expanding ongoing local practices and projects to adjacent streets or neighbourhoods. Most of the scaling modes mentioned are, in fact, already set in motion. @en

Pioneer cities have demonstrated a willingness and capability to decarbonise local heat systems, but support is needed to scale up action. Heat decarbonisation is not simply a technical challenge, but also a political and social one; stakeholders must inform decisions about appropriate technological and policy solutions and will, in turn, be affected by them. Taking three dimensions of stakeholders, technology, and policy, a structured approach which centres stakeholders is presented to help local government to collaboratively find appropriate technology and policy solutions, both at the strategic scale across the municipality and in localised pilot projects, and explores how to initialise and support heat decarbonisation in more cities. @en

This document is one of a four-part guide on how to accelerate the heat transition in cities. In this module the technical and physical aspects of the transition from fossil to renewable heating are emphasised. In the first section the reader is informed about the reasons why we need to transition our heating systems in the built environment to renewable sources. The second section provides the reader with an overview of technology choices and strategies, and is aimed at helping you make technical decisions.@en

SHIFFT is an Interreg 2 Seas project, running from 2019-2022, promoting cross-border cooperation between 4 European countries: The Netherlands, France, Belgium and The United Kingdom. It has been approved under the priority ‘Low Carbon Technologies’.@en

Cities play a key role in driving the transition to sustainable energy. Urban areas represent between 60% and 80% of global energy consumption and are a significant source of CO2 emissions, making energy management at the urban scale an important area of research. Urban energy systems have a strong influence on the environment, economy, social dimensions and urban spatial planning. Energy consumption affects the urban microclimate, urban comfort, human health, and conversely, urban physical, economic and social characteristics affect the energy urban profile. In order to improve the quality of energy strategies, policies, and plans, local authorities need decision support tools, like energy potential mapping, which have risen significance in the last decades. Energy data are crucial for those tools. They can increase the quality and effectiveness of energy planning but also support the integration between energy and spatial planning. Energy data can also stimulate citizen engagement as well as encourage sustainable behaviours and CO2 emission reduction. This paper aims to increase the practice of data-aware planning, through the study of problems in energy data acquisition and processing observed in European projects focused on developing energy mapping tools. The problems observed attend to two main areas: technical and socio-economic issues. Those were derived from a comparison of energy mapping tools, and the work conducted for the PLANHEAT development. The scope of the research is to understand the main recurring issues in energy data acquisition and processing, in order to overcome the barriers in data availability. Increasing awareness of the relevance of energy data can foster the use of energy mapping tools, increasing the quality of energy policies and planning.@en

Following the Paris Climate Agreements, all European cities must undergo a transition towards asustainable, net zero-carbon energy system. This is an unprecedented challenge that will require a lot of knowledge and methodological support.For the City-zen project, under the coordination and execution of TU Delft, chair of Climate Design & Sustainability, as task within City-zen (WP4, T2), the City-zen Urban Energy Transition Methodology (in short: City-zen Methodology) was developed and tested on various Roadshows (WP9, T3.2) and finally used for the Amsterdam Roadmap (WP4, T2 too). The Amsterdam energy transition roadmap was published in 2018.The essence of the City-zen Urban Energy Transition Methodology is as follows: based on extensive research into energy characteristics of the city, planned near-future developments, stakeholder analyses and future scenarios, a sustainable city vision can be elaborated, after which a roadmap with different energy transition paths can be defined.Such a roadmap was already made for the city of Amsterdam; this report uses maps and images of that study to exemplify steps taken in the City-zen Methodology.@en

Purpose: City-zen is an EU-funded interdisciplinary project that aims to develop and demonstrate energy-efficient cities and to build methods and tools for cities, industries and citizens to achieve ambitious sustainability targets. As part of the project, an Urban Energy Transition Methodology is developed, elaborated and used to create Roadmaps, which indicate the interventions needed to get from the current situation to the desired sustainable future state of a city. For one of the partner cities, Amsterdam, such a Roadmap was developed. The paper aims to discuss these issues. Design/methodology/approach: This paper discusses the approach and methodology behind the City-zen Urban Energy Transition Methodology, with its six steps from the initial energy analysis to the roadmap towards a desired future state. The paper will illustrate this by results from the Amsterdam Roadmap study, in numbers and figures. Findings: The Roadmap study of Amsterdam revealed that the city can become energy neutral in its heat demand, but not in the production of sufficient electricity from renewables. Research limitations/implications: Although as yet only applied to the City of Amsterdam, the methodology behind the roadmap can be applied by cities across the world. Practical implications: An enormous effort is required in order to transform, renovate and adapt parts of the city. It was calculated, for instance, how many energy renovation projects, district heating pipes and photovoltaic panels will be annually needed in order to timely become carbon neutral, energy neutral and “fossil free”. Social implications: The technical-spatial content of the Roadmap was presented to stakeholders of the Dutch capital city, such as politicians, energy companies, commercial enterprises, and not least citizens themselves. Although informed by scientific work, the Roadmap appealed too many, demonstrated by the extensive media coverage. Originality/value: The City-zen Methodology builds upon earlier urban energy approaches such as REAP (Tillie et al., 2009), LES (Dobbelsteen et al., 2011) and Energy Potential Mapping (Broersma et al., 2013), but creates a stepped approach that has not been presented and applied to a city as a whole yet. As far as the authors know, so far, an energy transition roadmap has never been developed for an entire city.

@en

Many cities across the world have the ambition of becoming carbon neutral, but exact figures of progress toward that goal are limited. Regarding Europe’s not overly ambitious 2020 carbon emission targets, many countries still have a long way to go (see Fig. 1), with cities as the prime objects for improvement. It is fair to say that the energy transition is lagging behind, for which several reasons can be given.
One assumption, based on experience with projects with various European cities, is that cities—their administrations and other stakeholders—generally have insufficient understanding of how to gain and maintain control over the complex process of the energy transition with its multiple actors and diverse objectives and responsibilities.
Another suggested reason is the lack of appropriate approaches, strategies, and methods to guide the energy transition in formulating clear targets and intermediate steps of mainly technical and spatial interventions. These, however are currently under development, and are being tested in cities across the continent—such as in Gothenburg, London, Rotterdam, Cologne, and Genova within the EU project Celsius (www.celsiuscity.eu), and in Amsterdam and Grenoble, for the EU project City-zen (www.cityzen-smartcity.eu)—with promising results so far.
The main research question underlying this chapter is: How can cities be supported in their energy transition toward carbon neutrality?
We will describe the development of approaches, strategies, and methods for the urban energy transition, their background and theoretical basis, and present urban case studies where they were applied. Finally, an outlook will be given for methodological developments in the near future.@en

This document represents deliverable 2.6 of the PLANHEAT project, a result of task 2.2.2 on unconventional sources, part of Work Package 2 on the Mapping Module. The purpose of this task is to develop simple and detailed models for mapping local energy sources and to allocate and map sources and information (heating and cooling factor).@en

Although more than half of the world’s population now lives in cities, this trend is expected to continue and there is an increasing awareness of the need to move to a fully sustainable urban energy system, this transition process is still significantly lagging behind in many places. The yield of many renewable energy sources is directly related to the surface available for deployment. Because of this and the high density of cities, urban planners face the difficult challenge of incorporating energy based planning in their practices. The TU Delft method of Energy Potential Mapping provides the means to spatially quantify energy demand and renewable supply in the built environment in a unified way. This paper presents three current research projects that apply the EPM method in European cities: CELSIUS (smart District Heating and Cooling), City-zen (urban transition strategies) and PLANHEAT (urban DHC planning toolset).@en

Although more than half of the world’s population now lives in cities, this trend is expected to continue and there is an increasing awareness of the need to move to a fully sustainable urban energy system, this transition process is still significantly lagging behind in many places. The yield of many renewable energy sources is directly related to the surface available for deployment. Because of this and the high density of cities, urban planners face the difficult challenge of incorporating energy based planning in their practices. The TU Delft method of Energy Potential Mapping provides the means to spatially quantify energy demand and renewable supply in the built environment in a unified way. This paper presents three current research projects that apply the EPM method in European cities: CELSIUS (smart District Heating and Cooling), City-zen (urban transition strategies) and PLANHEAT (urban DHC planning toolset).@en