The Lunar Meteoroid Impact Observer (LUMIO) is one of the four projects selected within ESA’s SysNova competition to develop a small satellite or scientific and technology demonstration purposes to be deployed by a mothership around the Moon. Themission utilizes a 12U form-factor CubeSat which carries the LUMIO-Cam, an optical instrument capable of detecting light flashes in the visible spectrum to continuously monitor and process the meteoroids impacts. In this chapter, we will describe the mission concept and focus on the performance of a novel navigation concept using Moon images taken as byproduct of the LUMIOCam operations. This new approach will considerably limit the operations burden on ground, aiming at autonomous orbit-attitude navigation and control. Furthermore, an efficient and autonomous strategy for collection, processing, categorization, and storage of payload data is also described to cope with the limited contact time and downlink bandwidth. Since all communications have to go via a lunar orbiter, all commands and telemetry/data will have to be forwarded to/from the mothership. This will prevent quasi-real-time operations and will be the first time for CubeSats as they have never flown without a direct link to Earth. This chapter was derived from a paper the authors delivered at the SpaceOps 2018 conference.

@en

The Earth–Moon system is constantly being bombarded by a significant number of meteoroids with different sizes and velocities. Observation of the lunar surface impacts will enable characterization of the lunar meteoroid flux, which is similar to that of the Earth, and provide more detailed information on meteoroid size, velocity, temporal and spatial distribution. The Lunar Meteoroid Impacts Observer (LUMIO) is a CubeSat mission at Earth–Moon L2 to observe, quantify, and characterise these meteoroid impacts by detecting their flashes on the lunar farside. LUMIO is one of the two winners of ESA’s LUCE (Lunar CubeSat for Exploration) SysNova competition, and as such is being considered by ESA for implementation in the near future. This paper will present the design of the LUMIO spacecraft that will host the payload to capture the meteoroid flashes. Key system specifications, trade-offs and consequent design iterations are presented. The final design yields a feasible spacecraft budget and a configuration that enables the LUMIO mission to be realized by 2023. The spacecraft is a 12U form-factor CubeSat, with a mass of less than 22 kg. A zero-redundancy and COTS based approach has been adopted for the spacecraft design. A strong emphasis has been placed on realizing high onboard autonomy. A novel and autonomous navigation strategy that uses optical observations of the Earth and the Moon is proposed for navigation around the Moon and beyond. The payload and navigation are the key drivers of the pointing requirements. Pointing requirements are achieved through reaction wheels, IMUs, star trackers, and fine sun sensors. A hybrid micro-propulsion system is included for orbital control, de-tumbling, and reaction wheel desaturation. Steady solar power availability is ensured with a one-axis solar array drive assembly in combination with an innovative attitude algorithm. Communication with Earth is through the Lunar Orbiter with a low-bandwidth UHF link, which places high constraints on the data throughput. An onboard payload data processor has been designed that compresses the science data to a fraction of the raw data with no loss of information. The paper will conclude with the key findings of a concurrent design review of the LUMIO spacecraft design that was performed at ESA/ESTEC’s Concurrent Design Facility (CDF). The major design changes are outlined along with a summary and discussion of the iterated design.@en

The Lunar Meteoroid Impact Observer (LUMIO) is a CubeSat mission to observe, quantify, and characterize the meteoroid impacts by detecting their flashes on the lunar farside. LUMIO is one of the two winners of ESA’s LUCE (Lunar CubeSat for Exploration) SYSNOVA competition, and as such it is being considered by ESA for implementation in the near future. The mission utilizes a CubeSat that carries the LUMIO-Cam, an optical instrument capable of detecting light flashes in the visible spectrum. On-board data processing is implemented to minimize data downlink, while still retaining relevant scientific data. The mission implements a sophisticated orbit design: LUMIO is placed on a halo orbit about Earth–Moon L2 where permanent full-disk observation of the lunar farside is made. This prevents background noise due to Earthshine, and permits obtaining highquality scientific products. Innovative full-disk optical autonomous navigation is proposed, and its performances are assessed and quantified. The spacecraft is a 12U form-factor CubeSat, with 22 kg mass. Novel on-board micro-propulsion system for orbital control, de-tumbling, and reaction wheel desaturation is used. Steady solar power generation is achieved with solar array drive assembly and eclipse-free orbit. @en

The Lunar Meteoroid Impact Observer (LUMIO) is a mission designed to observe, quantify, and characterize the meteoroid impacts by detecting their flashes on the lunar farside. Earth-based lunar observations are restricted by weather, geometric, and illumination conditions, while a lunar orbiter can improve the detection rate of lunar meteoroid impact flashes, as it would allow for longer monitoring periods. This paper presents the scientific mission of LUMIO, designed for the ESA SysNova LUCE competition, that resulted as the ex-aequo winner in the competition. LUMIO, a 12U CubeSat weighting approximately 20 kg, is expected to be deployed into a quasi-polar selenocentric orbit by a mother spacecraft, which also acts as communication relay. From a lunar high-inclination orbit, LUMIO will autonomously determine its trajectory to reach the Moon–Earth L2 point and perform the cruise phase. From the operative orbit, LUMIO will observe the lunar farside. When the lunar disk illumination is less than 50%, LUMIO autonomously performs the scientific task without direct coordination from Earth. Fully autonomous operations will include science, communication, and navigation. A similar concept can be re-used for a wide variety of future missions. The scientific mission will also be possible thanks to an innovative on-board data processing system, capable of drastically reducing the information to transmit to Earth. The camera, designed to capture the flashes and measure their intensity is, in fact, capable of generating 2.6 TB/day while only approximately 1 MB/day will need to be transmitted to Earth. Impact identification will be autonomous and only relevant information will be transmitted. A study at the ESA/ESTEC concurrent design facility has shown evidence of feasibility and that a CubeSat orbiting along an Earth–Moon L2 quasi-halo orbit is expected to bring a relevant contribution to lunar science and innovation to space exploration.@en

The Lunar Meteoroid Impacts Observer (LUMIO) is one of the four projects selected within ESA’s SysNova competition to develop a small satellite for scientific and technology demonstration purposes to be deployed by a mother ship around the Moon. The mission utilizes a 12U form-factor CubeSat which carries the LUMIO-Cam, an optical instrument capable of detecting light flashes in the visible spectrum to continuously monitor and process the meteoroids impacts. In this paper, we will describe the mission concept and focus on the performance of a novel navigation concept using Moon images taken as byproduct of the LUMIO-Cam operations. This new approach will considerably limit the operations burden on ground, aiming at autonomous orbit-attitude navigation and control. Furthermore, an efficient and autonomous strategy for collection, processing, categorization, and storage of payload data is also described to cope with the limited contact time and downlink bandwidth. Since all communications have to go via a Lunar Orbiter (mothership), all commands and telemetry/data will have to be forwarded to/from the mother ship. This will prevent quasi-real time operations and will be the first time for CubeSats as they have never flown so far from Earth. @en

Microelectromechanical systems (MEMS) techniques uncovered new opportunities in satisfying the mission requirements of the growing next generation nano- and pico-satellite missions. In particular, micro-propulsion is universally recognized as one of the key enabling technologies to help this class of satellites making the next step and become credible candidates to a wide range of scientific and commercial applications. In this context, TU Delft is developing a miniaturized electro-thermal propulsion system operating with green liquid propellants, for application on a wide range of nano-satellite formats from CubeSats (10x10x10 cm units) to PocketQubes (5x5x5 cm units). A breadboard of the complete micro-propulsion system is under development at TU Delft, including the thruster, propellant tank, the valve and the driving electronics. The design of the system shall be easily adapted to both CubeSat and PocketQube standards, with particular attention to the second one since the system is scheduled for an initial flight demonstration on the first Delfi-PQ satellite. To address this need and to fill an existing gap in the state-of-the-art of micro-propulsion, two kinds of micro-thrusters are considered in this development; a Vaporizing Liquid Micro-resistojet (VLM) and a Low Pressure Micro-resistojet (LPM). A number of test results will be shown in the paper on the electrical, mechanical and functional characterization of the MEMS thrusters, fabricated in the Else Kooi Laboratory at TU Delft, and the other components of the system. Keywords: Micro-resistojet, Microthruster, MEMS, Cubesats, Pocketqubes @en