A set of scale-model tests was carried out at the wave basin of the Leibniz University Hannover to extend the range of wave steepness values analysed in run-up, overtopping and armour layer stability studies, focusing on oblique extreme wave conditions and on their effects on a gentler slope breakwater’s trunk armour and roundhead. The paper describes the model set-up and operation concentrating on the measurement techniques used in those tests, namely on the innovative techniques for armour layer damage characterization. @en

A set of scale-model tests carried out to enlarge the range of wave steepness values analysed in run-up, overtopping and armour layer stability studies, focusing on oblique extreme wave conditions and on their effects on a gentler slope breakwater's trunk armour and roundhead, is presented in this paper. A stretch of a rubble mound breakwater (head and part of the adjoining trunk, with a slope of 1(V):2(H)) was built in a wave basin at the Leibniz University Hannover to assess, under extreme wave conditions (wave steepness of 0.055) with different incident wave angles (from 40° to 90°), the structure behaviour in what concerns wave run-up, wave overtopping and damage progression of the armour layer. Two types of armour elements (rock and Antifer cubes) were tested. Non-intrusive methodologies including a new application of laser scanning technique for the assessment of both armour layer damage and wave run-up and overtopping were used. It is expected that such work will contribute also with data to improve empirical formulas as well as to validate complex numerical model for wave-structure interaction.

@en