Summary

Numerous ancient historical constructions worldwide depend primarily on an extensive array of wooden foundation piles, as they are subject to loading conditions governed by the superstructure above. Wooden foundations transfer loads through a combination of compression and lateral resistance. The inherent strength of wood handles compressive forces, while stiffness and soil friction counteract lateral loads. Proper arrangement and maintenance ensure even load distribution. Careful design, wood quality, depth, and protective treatments are essential for longevity and load-bearing efficiency.

Amsterdam, the Netherlands' capital city, renowned for its rich artistic heritage, intricate canal infrastructure, and slender architectural dwellings, originated as a modest fishing hamlet that underwent remarkable development into a prominent global European city. During this urban transformation, less visible engineering elements, such as wooden foundation piles, were overlooked, despite their critical significance. In Amsterdam's historical core, the majority of structures including buildings, bridges, and quay walls, rely on these wooden supports. Noteworthy, the city estimates that 12 million such piles are still active. These structural components have consistently demonstrated economic efficiency and reliability. Nonetheless, the aging process affecting these foundations, with some dating back up to 500 years, introduces complexities when assessing their current load-bearing capacities and the ensuing reliability of the structures they support.

The lack of knowledge and inspection techniques of the mechanical and physical properties of these timber piles hinders a proper evaluation of the remaining life span of the foundations which could lead to possible irreplaceable structural damage to these structures. This body of research evaluates the physical and mechanical properties such as the actual moisture content, density distribution, compressive strength, and modulus of elasticity through the cross section of Spruce (Picea abies) foundation piles. Therefore, the overarching research question has arisen:

“How do the variations of mechanical and physical attributes manifest across the cross-sectional profile of both degraded and non-degraded spruce foundation piles and how can micro-drilling techniques be utilized to assess these characteristics?“

This will be achieved by means of small-scale compressive experimental testing of five prisms extracted from each cross-section (3 separate locations along the length of the pile) of foundation piles never driven into the soil and piles that were retrieved under bridges in the historical centre of Amsterdam that were planned to be demolished. These aforementioned retrieved piles had a service life between 100 years and 300 years, always under the water table, presenting mechanical degradation due to loading over time and in addition possible bacterial degradation of the cross-section peripheral regions.

Initially, micro-drilling techniques were employed to ascertain the drilling amplitude. This step served to assess the initial quality of the wood under examination. Additionally, it aided in identifying specific points of interest for specimen extraction, including degraded wood in the peripheral regions, sound wood in the internal section, and the pith. Subsequently, the acquired data underwent thorough analysis. This analysis, combined with the micro-drilling measurements, enabled an assessment of the potential applicability of drilling amplitude in predicting the mechanical and physical properties of the pile. This sequential approach ensured a systematic and scientifically rigorous evaluation of the wood's characteristics and its implications for pile performance. The investigation was conducted to enhance the understanding of the structural performance and material characteristics of spruce foundation piles, while also evaluating the applicability of micro-drilling methods as a predictive tool in engineering assessments...