The contribution focuses on the technical aspects related to the focusing and interferometric processing of bistatic data acquired by companion satellite (CS) SAR missions. In particular, the processing aspects related to the large along-track baseline configuration will be addressed, for the processing needs to properly consider a potential high squint angle. The technical challenges encompass synchronization, image formation and coregistration. On the other hand, the availability of a large squint angle has some advantages in terms of the sensitivity to the north-south component of the deformation for interferometric applications. The theoretical derivations are complemented with point-target simulations and Monte-Carlo simulations.

@en

Companion SAR missions offer a cost-effective solution to enhance the added value of existing SAR satellites. In particular, they offer new possibilities to extend the observation space and provide one or several single-pass interferometric channels for the acquisitions. The paper aims to provide a description of an end-to-end performance simulation for companion SAR missions, including the evaluation of two exemplary configurations under realistic conditions and with the incorporation of the major error sources affecting these systems. A critical discussion of the results will be included of the final version of the paper drawing from the analysis relevant conclusions for the design of payload and concepts for future companion SAR missions.

@en

Companion SAR missions offer a cost-effective solution to boost the performance and capabilities of existing SAR missions. In particular, a whole suite of coherent single-pass observations become feasible, allowing for the interferometric and tomographic exploitation of the received data. Interferometric and tomographic measurements are however very sensitive to even the slightest degradations in the phase of the received data, and impose stringent requirements on the calibration concept of the mission. Weakly-synchronised companion SAR missions may have significant residual clock errors, which challenge the attainment of this requirements. We put forward an innovative calibration concept based on autonomous (data-based) calibration at different product levels and present an estimation of the expected performance for ESA's SAOCOM/CS mission.

@en

Companion SAR missions offer a cost-effective solution to boost the performance and capabilities of existing SAR missions. With the use of companion satellites, a whole suite of coherent single-pass observations become feasible, allowing for the interferometric and tomographic exploitation of the received data. Interferometric and tomographic measurements are however very sensitive to even the slightest degradations in the phase of the received data, and impose stringent requirements on the calibration concept of the mission. Weakly-synchronised companion SAR missions may have significant residual clock errors, which challenge the attainment of this requirements. We put forward an innovative calibration concept based on autonomous (data-based) calibration at different product levels and present an estimation of the expected performance for ESA's SAOCOM/CS mission.

@en

TanDEM-X (TerraSAR-X Add-on for Digital Elevation Measurements) is a high-resolution interferometric mission with the main goal of providing a global and unprecedentedly accurate digital elevation model of the Earth surface by means of single-pass X-band synthetic aperture radar (SAR) interferometry. Despite its usual quasi-monostatic configuration, TanDEM-X is the first genuinely bistatic SAR system in space. During its monostatic commissioning phase, the system has been mainly operated in pursuit monostatic mode. However, some pioneering bistatic SAR experiments with both satellites commanded in nonnominal modes have been conducted with the main purpose of validating the performance of both space and ground segments in very demanding scenarios. In particular, this letter reports about the first bistatic acquisition and the first single-pass interferometric (mono-/bistatic) acquisition with TanDEM-X, addressing their innovative aspects and focusing on the analysis of the experimental results. Even in the absence of essential synchronization and calibration information, bistatic images and interferograms with similar quality to pursuit monostatic have been obtained.

@en

TanDEM-X is a high-resolution interferometric mission with the main goal of providing a global and unprecedentedly accurate digital elevation model (DEM) of the Earth surface by means of single-pass X-band SAR interferometry. Despite its usual quasi-monostatic configuration, TanDEM-X is the first genuinely bistatic SAR system in space. During its monostatic commissioning phase, the system has been mainly operated in pursuit monostatic mode. However, some pioneering bistatic SAR experiments with both satellites commanded in non-nominal modes have been conducted with the main purpose of testing the performance of both space and ground segments in very demanding scenarios. In particular, this paper reports about the first bistatic acquisition and the first single-pass interferometric (mono/bistatic) acquisition with TanDEM-X. Even in the absence of essential synchronisation and calibration information, bistatic images and interferogramswith similar quality to pursuit monostatic have been obtained.@en