The monitoring of wildfire smoke is important to help mitigate impacts on people such as by sending early warnings to affected areas. Received signal levels (RSLs) from radio links have been used as an opportunistic way to accurately measure rainfall and humidity. Radio links provide integrated measurements along their paths and are an exceptional untapped resource to complement air quality stations in areas affected by smoke events, or in developing countries without air quality monitoring capability. This study analyzed radio link signal fluctuations during smoke events associated with the 2019–2020 Australian wildfires. Concurrently, the atmospheric boundary layer was characterized using atmospheric soundings and surface observations, as well as air quality proxies such as particulate matter concentrations less than 2.5 μm (10 μm), or PM2.5 (PM10). Observations showed that dry air containing large amounts of smoke within a surface layer above the ground acted as a lid, reducing dispersion, trapping and maintaining high ground-level concentrations of smoke. These conditions also created anomalous propagation conditions for radio links and operational weather radars. Power-law relations between signal fluctuations and PM10 and PM2.5 were derived based on the link data collected and the closest air quality station observations. While there was variability in retrieval performance across smoke events, the best performance determination coefficients exceeded 0.5, with an RMSE on the order of less than 50 μg m−3 for concentrations of more than 400 μg m−3. Mid-range link lengths (5–20 km) provided the best results.@en

Assimilating remote sensing observations into land surface models has become common practice to improve the accuracy of terrestrial water storage (TWS) estimates such as soil moisture and groundwater, for understanding the land surface interaction with the climate system, as well as assessing regional and global water resources. Such remote sensing observations include soil moisture information from the L-band Soil Moisture and Ocean Salinity (SMOS) and Soil Moisture Active Passive (SMAP) missions, and TWS information from the Gravity Recovery And Climate Experiment (GRACE). This study evaluates the benefit of assimilating them into the Community Atmosphere and Biosphere Land Exchange (CABLE) land surface model. The evaluation is conducted in the Goulburn River catchment, South-East Australia, where various in situ soil moisture and groundwater level data are available for validating data assimilation (DA) approaches. It is found that the performance of DA mainly depends on the type of observations that are assimilated. The SMOS/SMAP-only assimilation (SM DA) improves the top soil moisture but degrades the groundwater storage estimates, whereas the GRACE-only assimilation (GRACE DA) improves only the groundwater component. Assimilating both observations (multivariate DA) results in increased accuracy of both soil moisture and groundwater storage estimates. These findings demonstrate the added value of multivariate DA for simultaneously improving different model states, thus leading to a more robust DA system.

@en

Commercial microwave links (CMLs) have proven useful for providing rainfall information close to the ground surface. However, large uncertainties are associated with these retrievals, partly due to challenges in the type of data collection and processing. In particular, the most common case is when only minimum and maximum received signal levels (RSLs) over a given time interval (hereafter 15 min) are stored by mobile network operators. The average attenuation and the corresponding rainfall rate are then calculated based on a weighted average method using the minimum and maximum attenuation. In this study, an alternative to using a constant weighted average method is explored, based on a machine learning model trained to produce actual attenuation from minimum/maximum values. A rainfall retrieval deep learning model was designed based on a long short-term memory (LSTM) model architecture and trained with disdrometer data in a form that is comparable to the data provided by mobile network operators. A first evaluation used only disdrometer data to mimic both attenuation from a CML and corresponding rainfall rates. For the test data set, the relative bias was reduced from 5.99% to 2.84% and the coefficient of determination (R²) increased from 0.86 to 0.97. The second evaluation used this disdrometer-trained LSTM to retrieve rainfall rates from an actual CML located nearby the disdrometer. A significant improvement in the overall rainfall estimation compared to existing microwave link attenuation models was observed. The relative bias reduced from 7.39% to −1.14% and the R² improved from 0.71 to 0.82.

@en

Knowledge of the full rainfall drop size distribution (DSD) is critical for characterising liquid water precipitation for applications such as rainfall retrievals using electromagnetic signals and atmospheric model parameterisation. Southern Hemisphere temperate latitudes have a lack of DSD observations and their integrated variables. Laserbased disdrometers rely on the attenuation of a beam by falling particles and are currently the most commonly used type of instrument to observe the DSD. However, there remain questions on the accuracy and variability in the DSDs measured by co-located instruments, whether identical models, different models or from different manufacturers. In this study, raw and processed DSD observations obtained from two of the most commonly deployed laser disdrometers, namely the Parsivel1 from OTT and the Laser Precipitation Monitor (LPM) from Thies Clima, are analysed and compared. Four co-located instruments of each type were deployed over 3 years from 2014 to 2017 in the proximity of Melbourne, a region prone to coastal rainfall in south-eastern Australia. This dataset includes a total of approximately 1.5 million recorded minutes, including over 40 000 min of quality rainfall data common to all instruments, equivalent to a cumulative amount of rainfall ranging from 1093 to 1244mm (depending on the instrument records) for a total of 318 rainfall events. Most of the events lasted between 20 and 40 min for rainfall amounts of 0.12 to 26.0 mm. The colocated LPM sensors show very similar observations, while the co-located Parsivel1 systems show significantly different results. The LPM recorded 1 to 2 orders of magnitude more smaller droplets for drop diameters below 0.6mm compared to the Parsivel1, with differences increasing at higher rainfall rates. The LPM integrated variables showed systematically lower values compared to the Parsivel1. Radar reflectivity- rainfall rate (ZH-R) relationships and resulting potential errors are also presented. Specific ZH-R relations for drizzle and convective rainfall are also derived based on DSD collected for each instrument type. Variability of the DSD as observed by co-located instruments of the same manufacturer had little impact on the estimated ZH-R relationships for stratiform rainfall, but differs when considering convective rainfall relations or ZH-R relations fitted to all available data. Conversely, disdrometer-derived ZH-R relations as compared to the Marshall-Palmer relation ZH D 200R1:6 led to a bias in rainfall rates for reflectivities of 50 dBZ of up to 21.6mmh1. This study provides an open-source high-resolution dataset of co-located DSD to further explore sampling effects at the micro scale, along with rainfall microstructure.

@en