This paper describes an implementation of a reinforcement learning-based framework applied to the control of a multi-copter rotorcraft. The controller is based on continuous state and action Q-learning. The policy is stored using a radial basis function neural network. Distance-based neuron activation is used to optimize the generalization algorithm for computational performance. The training proceeds off-line, using a reduced-order model of the controlled system. The model is identified and stored in the form of a neural network. The framework incorporates a dynamics inversion controller, based on the identified model. Simulated flight tests confirm the controller’s ability to track the reference state signal and outperform a conventional proportional-derivative(PD) controller. The contributions of the developed framework are a computationally-efficient method to store a Q-function generalization, continuous action selection based on local Q-function approximation and a combination of model identification and offline learning for inner-loop control of a UAV system.@en

Self-learning approaches, such as reinforcement learning, offer new possibilities for autonomous control of uncertain or time-varying systems. However, exploring an unknown environment under limited prediction capabilities is a challenge for a learning agent. If the environment is dangerous, free exploration can result in physical damage or in an otherwise unacceptable behavior. With respect to existing methods, the main contribution of this paper is the definition of a new approach that does not require global safety functions, nor specific formulations of the dynamics or of the environment, but relies on interval estimation of the dynamics of the agent during the exploration phase, assuming a limited capability of the agent to perceive the presence of incoming fatal states. Two algorithms are presented with this approach. The first is the Safety Handling Exploration with Risk Perception Algorithm (SHERPA), which provides safety by individuating temporary safety functions, called backups. SHERPA is shown in a simulated, simplified quadrotor task, for which dangerous states are avoided. The second algorithm, denominated OptiSHERPA, can safely handle more dynamically complex systems for which SHERPA is not sufficient through the use of safety metrics. An application of OptiSHERPA is simulated on an aircraft altitude control task.@en

Reinforcement Learning is a much researched topic for autonomous machine behavior and is often applied to navigation problems. In order to deal with growing environments and larger state/action spaces, Hierarchical Reinforcement Learning has been introduced. Unfortunately learning from experience, which is central to Reinforcement Learning, makes guaranteeing safety a complex problem. This paper demonstrates an approach, named the actor-judge approach, to make the exploration safer while imposing as few as possible restrictions on the agent. The approach combines ideas from the
elds of Hierarchical Reinforcement Learning and Safe Reinforcement Learning to develop a Safe Hierarchical Reinforcement Learning algorithm. The algorithm is tested in a simulated environment where the agent represents an Unmanned Aerial Vehicle able to move laterally in four directions using quadridirectional range sensors to establish a relative position. Although this approach does not guarantee the agent to never explore unsafe areas of the state domain, results show the actor-judge method increases agent safety and can be used on multiple levels an HRL agent hierarchy.
@en

@en

@en

Navigation in an unknown or uncertain environment is a challenging task for an autonomous agent. The agent is expected to behave independently and to learn the suitable action to take for a given situation. Reinforcement Learning could be used to help the agent adapt to an unknown environment and learn the right actions to take. This paper presents the setup and the results of a reinforcement learning problem utilizing Q-learning and a Safety Handling Exploration with Risk Perception Algorithm (SHERPA) for safe exploration in an unknown environment. The agent has to explore its environment safely and must learn the optimal action for a given situation from the feedback received from the environment. The results show that the agent can learn a value function converged to within 10% of the optimal values after 5000 iterations. The simulation results show that the proposed approach ensures that the agent explores an unknown environment safely and learns the desirable actions for a given situation. @en

Goal-finding in an unknown maze is a challenging problem for a Reinforcement Learning agent, because the corresponding state space can be large if not intractable, and the agent does not usually have a model of the environment. Hierarchical Reinforcement Learning has been shown in the past to improve tractability and learning time of complex problems, as well as facilitate learning a coherent transition model for the environment. Nonetheless, considerable time is still needed to learn the transition model, so that initially the agent can perform poorly by getting trapped into dead ends and colliding with obstacles. This paper proposes a strategy for maze exploration that, by means of sequential tasking and off-line training on an abstract environment, provides the agent with a minimal level of performance from the very beginning of exploration. In particular, this approach allows to prevent collisions with obstacles, thus enforcing a safety restraint on the agent. @en