In this paper, we share our experience in designing, prototyping, and empirically characterizing RF Switch-based Reconfigurable Intelligent Surfaces (RIS). Our RIS design consists of arrays of patch antennas, delay lines, and programmable radio-frequency (RF) switches, enabling 3D beamforming passively, without active RF components. Our design introduces two key innovations: (i) a modular structure that provides scalability for sustainable deployments, and (ii) the support for 3-bit phase shifters, enabling high-spatial resolution codebooks. We realized this design through PCB technology and affordable electronic components, then rigorously validated our prototype in a controlled setting. With this paper, we make a comprehensive characterization of our RIS publicly available via a large dataset, to promote further empirical-driven research on this topic. Finally, we present a cost analysis of our design, which underscores the importance of sustainable practices in shaping the future of wireless technologies.

@en

In this article, we present two datasets that we make publicly available for research. The data is collected in a testbed comprised of a custom-made reconfigurable intelligent surface (RIS) prototype and two regular orthogonal frequency-division multiplexing (OFDM) transceivers within an anechoic chamber. First, we discuss the details of the testbed and equipment used, including insights about the design and implementation of our RIS prototype. We further present the methodology we employ to gather measurement samples, which consists of letting the RIS electronically steer the signal reflections from an OFDM transmitter toward a specific location. To this end, we evaluate a suitably designed configuration codebook and collect measurement samples of the received power with an OFDM receiver. Finally, we present the resulting datasets, their format, and examples of exploiting this data for research purposes.

@en

Reconfigurable Intelligent Surfaces (RISs) are expected to be massively deployed in future beyond-5th generation wireless networks, thanks to their ability to programmatically alter the propagation environment, inherent low-cost and low-maintenance nature. Indeed, they are envisioned to be implemented on the facades of buildings or on moving objects. However, such an innovative characteristic may potentially turn into an involuntary negative behavior that needs to be addressed: an undesired signal scattering. In particular, RIS elements may be prone to experience failures due to lack of proper maintenance or external environmental factors. While the resulting Signal-to-Noise-Ratio (SNR) at the intended User Equipment (UE) may not be significantly degraded, we demonstrate the potential risks in terms of unwanted spreading of the transmit signal to non-intended UEs. In this regard, we consider the problem of mitigating such undesired effectby proposing two simple yet effective algorithms, which are based on maximizing the Signal-to-Leakage-and-Noise-Ratio (SLNR) over a predefined two-dimensional (2D) area and are applicable in the case of perfect channel-state-information (CSI) and partial CSI, respectively. Numerical and full-wave simulations demonstrate the added gains compared to leakage-unaware and reference schemes.

@en

This paper studies a promising use case of a private 5G network for the sports industry: wearable bodycams and sensors in a football match. This use case requires a reliable and dedicated massive MIMO network to provide uniform coverage with a high capacity in the whole pitch area. The coverage of co-located and distributed (cell-free) massive MIMO, differing in the configuration of base station antenna placement inside the stadium, are evaluated through ray tracing using a 3D stadium model and players' mobility dataset. The results give insight into how distributed antennas inside the stadium should be deployed to enhance the uniform coverage of moving wearable devices. Besides that, the uplink capacity performance and the impact of channel aging on the capacity are also evaluated. The results demonstrate the advantages and disadvantages of different base station antenna distribution strategies in terms of coverage, capacity and channel aging impact.@en

In this paper, we present our experience designing, prototyping, and empirically characterizing RF Switch-based Reconfigurable Intelligent Surfaces (RIS). Our RIS design comprises arrays of patch antennas, delay lines and programmable radio-frequency (RF) switches that enable almost-passive 3D beamforming, i.e., without active RF components. We implement this design using PCB technology and low-cost electronic components, and thoroughly validate our prototype in a controlled environment with high spatial resolution codebooks. Finally, we make available a large dataset with a complete characterization of our RIS and present the costs associated with reproducing our design.

@en