Empowering cellular networks with augmented sensing capabilities is a key research area in sixth generation (6 G) communication systems. Recently, we have witnessed a plethora of efforts to devise solutions that integrate sensing capabilities into communication systems, i.e., integrated sensing and communication (ISAC), especially at millimeter-wave (mmWave) frequencies with large bandwidths. Despite the challenges posed by severe path loss and blockage at mmWave bands, this work incorporates reconfigurable intelligent surfaces (RISs) into ISAC systems to enhance both sensing and communication. To comply with the waveform utilized in current cellular systems, this paper studies mmWave orthogonal frequency-division multiplexing (OFDM) ISAC systems in the presence of RISs. Specifically, we jointly design the hybrid beamforming and RIS phase shifts to guarantee the sensing functionalities via minimizing the beampattern mean squared error at RIS, subject to signal-to-interference-plus-noise (SINR) and power constraints. The non-convexity of the investigated problem poses a challenge which we address by proposing a solution based on the penalty method and manifold-based alternating direction method of multipliers (ADMM). Simulation results demonstrate that both sensing and communication capabilities improve when the RIS is adequately designed. In addition, we discuss the tradeoff between sensing and communication.

Liquid crystal (LC) technology offers a cost-effective, scalable, energy-efficient, and continuous phase tunable realization of extremely large reconfigurable intelligent surfaces (RISs). However, LC response time to achieve a desired differential phase is significantly higher compared to competing silicon-based technologies (RF switches, PIN diodes, etc). The slow response time can be the performance bottleneck for applications where frequent reconfiguration of the RIS (e.g., to serve different users) is needed. In this paper, we develop an RIS phase-shift design that is aware of the transition behavior and aims to minimize the time to switch among multiple RIS configurations each serving a mobile user in a time-division multiple-access (TDMA) protocol. Our simulation results confirm that the proposed algorithm significantly reduces the time required for the users to achieve a threshold signal quality. This leads to a considerable improvement in the achievable throughput for applications, where the length of the TDMA time intervals is comparable with the RIS reconfiguration time.

Wireless backhauling at millimeter-wave frequencies (mmWave) in static scenarios is a well-established practice in cellular networks. However, highly directional and adaptive beamforming in today's mmWave systems have opened new possibilities for self-backhauling. Tapping into this potential, 3GPP has standardized Integrated Access and Backhaul (IAB) allowing the same base station to serve both access and backhaul traffic. Although much more cost-effective and flexible, resource allocation and path selection in IAB mmWave networks is a formidable task. To date, prior works have addressed this challenge through a plethora of classic optimization and learning methods, generally optimizing Key Performance Indicators (KPIs) such as throughput, latency, and fairness, and little attention has been paid to the reliability of the KPI. We propose, a risk-averse learning-based solution for IAB mmWave networks. In addition to optimizing the average performance, ensures reliability by minimizing the losses in the tail of the performance distribution. We develop a novel simulator and show via extensive simulations that not only reduces the latency by up to 43.2% compared to the benchmarks, but also exhibits significantly more reliable performance, e.g., 71.4% less variance in latency.

Wireless backhauling at millimeter-wave frequencies (mmWave) in static scenarios is a well-established practice in cellular networks. However, highly directional and adaptive beamforming in today's mmWave systems have opened new possibilities for self-backhauling. Tapping into this potential, 3GPP has standardized Integrated Access and Backhaul (IAB) allowing the same base station to serve both access and backhaul traffic. Although much more cost-effective and flexible, resource allocation and path selection in IAB mmWave networks is a formidable task. To date, prior works have addressed this challenge through a plethora of classic optimization and learning methods, generally optimizing Key Performance Indicators (KPIs) such as throughput, latency, and fairness, and little attention has been paid to the reliability of the KPI. We propose, a risk-averse learning-based solution for IAB mmWave networks. In addition to optimizing the average performance, ensures reliability by minimizing the losses in the tail of the performance distribution. We develop a novel simulator and show via extensive simulations that not only reduces the latency by up to 43.2% compared to the benchmarks, but also exhibits significantly more reliable performance, e.g., 71.4% less variance in latency.

Wireless backhauling at millimeter-wave frequencies (mmWave) in static scenarios is a well-established practice in cellular networks. However, highly directional and adaptive beamforming in today's mmWave systems have opened new possibilities for self-backhauling. Tapping into this potential, 3GPP has standardized Integrated Access and Backhaul (IAB) allowing the same base station to serve both access and backhaul traffic. Although much more cost-effective and flexible, resource allocation and path selection in IAB mmWave networks is a formidable task. To date, prior works have addressed this challenge through a plethora of classic optimization and learning methods, generally optimizing Key Performance Indicators (KPIs) such as throughput, latency, and fairness, and little attention has been paid to the reliability of the KPI. We propose, a risk-averse learning-based solution for IAB mmWave networks. In addition to optimizing the average performance, ensures reliability by minimizing the losses in the tail of the performance distribution. We develop a novel simulator and show via extensive simulations that not only reduces the latency by up to 43.2% compared to the benchmarks, but also exhibits significantly more reliable performance, e.g., 71.4% less variance in latency.

— Wi-Fi sensing applications have achieved remarkable results over the last decade, offering accurate device-free localization and gesture recognition capabilities. Indeed, Wi-Fi sensing has quickly become a critical field of research for future communication systems under the paradigm known as joint communication and sensing. However, device-free wireless sensing can also be exploited for malign purposes against unaware victims, and the omnipresence of Wi-Fi transceivers poses a significant threat to people’s privacy. Therefore, it is essential to develop functional solutions that can effectively thwart wireless sensing. All the current attempts to hinder illegitimate wireless sensing rely on specialized hardware deployed in the environment, but their cost and complexity can undermine widespread deployment. In this paper, we explore the possibility of using native capabilities of Wi-Fi systems, namely beamforming, to thwart wireless sensing. To this end, we propose for the first time a solution that enables complete control over the beamforming in commercial Wi-Fi devices. On top of that, we build BeamDancer, which randomizes beamforming vectors to inhibit channel fingerprinting. We empirically demonstrate the effectiveness of the proposed solution against three different wireless sensing techniques, both data-driven and model-based, while preserving almost entirely the legitimate Wi-Fi traffic at the same time.

Wireless backhauling at millimeter-wave frequencies (mmWave) in static scenarios is a well-established practice in cellular networks. However, highly directional and adaptive beamforming in today's mmWave systems have opened new possibilities for self-backhauling. Tapping into this potential, 3GPP has standardized Integrated Access and Backhaul (IAB) allowing the same base station to serve both access and backhaul traffic. Although much more cost-effective and flexible, resource allocation and path selection in IAB mmWave networks is a formidable task. To date, prior works have addressed this challenge through a plethora of classic optimization and learning methods, generally optimizing Key Performance Indicators (KPIs) such as throughput, latency, and fairness, and little attention has been paid to the reliability of the KPI. We propose Safehaul, a risk-averse learning-based solution for IAB mmWave networks. In addition to optimizing the average performance, Safehaul ensures reliability by minimizing the losses in the tail of the performance distribution. We develop a novel simulator and show via extensive simulations that Safehaul not only reduces the latency by up to 43.2% compared to the benchmarks, but also exhibits significantly more reliable performance, e.g., 71.4% less variance in latency.